Neumann KH 120 II DSP WHITE (SINGLE)
₹81,900.00
Neumann’s acclaimed studio monitor taken to a new level with deeper bass, higher resolution, and DSP power.
- Linear frequency and phase response
- DSP engine for improved performance and automatic room alignment
- Deep low end down to 44 Hz and high SPL capability in a small format
- Analog and S/PDIF connectivity, optional: AES67
Available on backorder
EVEN BETTER
When Neumann released the KH 120 A in 2010, it was the beginning of an ongoing success story. Neumann monitoring has since become the reference of choice in countless studios around the world. The KH 120 II follows the same philosophy as its predecessor and, in fact, all Neumann studio monitors: highest linearity, lowest distortion, no coloration, and perfect adaptability to any acoustic environment. Thanks to improved performance in all parameters and a powerful DSP engine, the KH 120 II enables you to hear your tracks with even greater clarity and work more efficiently. Create mixes that translate optimally to all playback systems. With ease.
PERFECT SOUND WITH A SMALL FOOTPRINT
The KH 120 II has an exceptionally linear frequency response from 44 Hz to 21 kHz (±3 dB). Not only that: It also linearizes the phase response! Which translates to clear mids with astonishing transparency as well as extreme accuracy in the time domain: precise impulse reproduction and finely resolved reverbs. This is made possible by DSP controlled electronics which allow for sophisticated crossovers avoiding the phase distortion caused by analog filters. The internal DSP also realizes new standards in tonal consistency. The KH 120 II is made to extremely low tolerances of no more than ±0.5 dB! And you can hear it, too: Stereo imaging is razor-sharp.
The KH 120 II is designed for nearfield applications with a recommended listening distance of 1 – 2 meters (3 – 6 ft.). It is thus ideally suited to smaller rooms such as home and project studios as well as mixing and editing suites or as a surround speaker in large multichannel applications. Thanks to its outstanding linearity in a portable format, the KH 120 II is also an excellent choice for creating a professional quality makeshift control room when working on location (e.g. orchestra/choir, live recording, film, broadcast).
READY FOR YOUR ROOM
Even the best loudspeaker only sounds as good as the acoustic environment allows. Neumann’s Mathematically Modelled Dispersion™ (MMD™) waveguide guarantees a wide sweet spot and minimizes desk reflections. But the KH 120 II goes much further: Its internal DSP allows for room calibration via Neumann’s revolutionary Automatic Monitor Alignment. MA 1 (sold separately) makes sure your DSP powered monitors are optimally adapted to the character of your room and perfectly aligned for your listening position. Even in acoustically treated rooms, this results in a significant improvement.
Tonal compatibility with other KH line studio monitors makes it possible to use the KH 120 II in mixed setups e.g. in immersive setups. For flexible connectivity the KH 120 II features both analog and S/PDIF inputs.
AES 67 – AUDIO OVER IP
Additionally, the KH 120 II AES67 model variant offers integrated redundant AES67 audio network ports that are fully compliant with broadcast standards such as ST 2110, ST 2022-7 redundancy, and RAVENNA. At the same time, the KH 120 II AES67 is compatible with DANTE®-generated AES67 network streams.
ENERGY EFFICIENT
Neumann engineers took great care to develop a patent pending amplifier technology which combines superior audio performance with the energy efficiency of Class D. Although the power amplifiers of the KH 120 II deliver up to 145 W to the 5.25” woofer and 100 W to the 1” tweeter, they only consume 17 W at idle. Auto-standby reduces power consumption to 0.3 W when the KH 120 II has not been used for a while, but can be deactivated.
The KH 120 II is available in two color options, anthracite and white.
- High-precision drivers, Mathematically Modelled Dispersion™ (MMD™) waveguide
- Linear frequency response 44 Hz … 21 kHz (±3 dB)
- Linear phase response 120 Hz … 16 kHz (±45°) with latency <2.6 ms
- DSP inside allows for room adaptive alignment via Neumann’s MA 1
- Razor sharp imaging due to extremely low tolerances (±0.5 dB)
- May be combined with other KH line speakers in immersive or surround setups
You must be logged in to post a review.
Related products
-
Focal Trio6 Be (each)
₹409,905.00Original price was: ₹409,905.00.₹389,409.00Current price is: ₹389,409.00.Add to cartPerformance Frequency response 3-way mode 35Hz – 40kHz (+/- 3dB) 2-way mode (Focus) 90Hz – 20kHz (+/- 3dB) Maximum SPL 3-way mode 115dB SPL (peak at 1m) 2-way mode (Focus) 105dB SPL (peak at 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass
Midrange
Treble200W, class G
150W, class G
100W, class ABPower supply Main voltage Wiring 230V (class T fuse 1.6A fuse rating) – 115V (class T fuse 3.5 A fuse rating) Detachable IEC power cable Indicators and controls Rear panel Input sensitivity selector (+4dBu/-10dBV)
Low frequency shelving (+/- 3dB from 35 to 250Hz)
High frequency shelving (+/- 3dB from 4.5 to 40kHz)
EQ low-mid frequencies (+/- 3dB at 160Hz, Q factor = 1)
FOCUS input / FOCUS outputLED Focus mode on, audio clipping and protection indicated by LED on front panel Transducers Subwoofer 8W64701 8′ Focal driver with W composite sandwich cone Woofer 5W04701 5′ Focal driver with W composite sandwich cone Tweeter TB872, 1′ Focal pure Beryllium inverted dome tweeter Cabinet Structure 22mm (0.86′) reinforced panels Finish Dark Red natural Burr-ash veneering side panels, Black body Dimensions including 4 rubber feet (HxWxD) 201/2′ x 1015/16′ x 143/16′ (520 x 278 x 360mm) Weight 44 lbs (20 kg) -
Focal Shape Twin (each)
₹132,240.00Original price was: ₹132,240.00.₹125,628.00Current price is: ₹125,628.00.Add to cartSystem SHAPE TWIN Frequency response (+/- 3dB) 40Hz – 35kHz Maximum SPL(of musical signals) 110.5dB SPL(peak at @ 1m) Electronics Inputs /Impedance Type RCA connectors XLR: balanced 10 kOhms unbalanced 10 kOhms with sensitivity compensation Mid-range and low frequency amplifier 2 x 80W, class AB High frequency amplifier 50W, class AB Automatic standby Off Deactivate standby Approximately 30 minutes with no signal Signal detection > 3mV Power supply Voltage Connexion 220-240V (fuse T2AL / 250V) or 100-120V (fuse T3.15AL / 250V) IEC connector and detachable power cable Settings High-pass filter Bass level(0 – 250Hz) Midrange/bass(160 Hz, Q=1) Treble level(4.5 – 35kHz) Power on/of Adjustable Full range 45/60/90Hz Adjustable, +/-6 dB Adjustable, +/-3 dB Adjustable, +/-3 dB On/off switch on rear panel Power consumption in standby < 0.5W Displays and controls LED for power on/off and standby Transducers Woofers 2 x 5′ (13cm) Flax Cone woofers Tweeter 1′ (25mm) ‘M’-shaped Aluminum/Magnesium Cabinet Construction 0.6′ (15mm) MDF Finish Vinyl, real walnut and black paint Dimensions including 4 rubber feet (HxLxD) 18.8 x 8.3 x 11′ (478 x 211 x 279mm) Weight 24lbs (11kg) Recommended mounting kits Wall mounting kit K&M® 24471 + K&M® 24359 adapter Ceiling mounting kit K&M® 24496 + K&M® 24359 adapter -
Focal Alpha 65 Evo (each)
₹55,690.00Original price was: ₹55,690.00.₹52,905.00Current price is: ₹52,905.00.Add to cartVERSATILE PROFESSIONAL LOUDSPEAKER Active 2-way Alpha 65 Evo has a 1” (25mm) aluminium tweeter and a 6.5” (16.5 cm) woofer with Slatefiber cone developed and manufactured in Focal’s workshops in France. This monitor features excellent dynamics and neutrality in its tonal balance. Its technologies mean that Alpha 65 Evo can guarantee excellent sonic coherence wherever …
-
Focal Shape 50 (each)
₹80,450.00Original price was: ₹80,450.00.₹76,427.00Current price is: ₹76,427.00.Add to cartSystem SHAPE 50 Frequency response (+/-3dB) 50Hz – 35kHz Maximum SPL (musical signal) 106dB SPL (peak @ 1m) Electronic section Inputs/ Impedance Type XLR: balanced 10kOhms Connectors RCA: unbalanced 10kOhms with sensitivity compensation Midrange and low frequency amplifier 60W, class AB High frequency amplifier 25W, class AB Automatic standby Standby on After approximately 30 minutes with no signal Standby off Signal detection > 3 mV Electrical supply Voltages 220-240V (T800mAL / 250V fuse) or 100-120V (T1.6AL / 250V fuse) Connection IEC plug and detachable power cord Settings High pass filter Adjustable Full range 45/60/90Hz Bass(0 – 250Hz) Adjustable, +/-6dB Midrange/bass(160Hz, Q=1) Adjustable, +/-3dB SHAPE 50 Wall mount K&M® Fixing kit 24471 + K&M® 24359 adapter Ceiling mount K&M® Fixing kit 24496 + K&M® 24359 adapter Table stand / microphone stand K&M® Fixing kit 232 Settings High (4.5 – 35kHz) Adjustable, +/-3dB Power On/Power Of On/off switch on rear panel Standby consumption < 0.5W Displays and controls LED for power on/off and standby Transducers Woofer 5′ (13cm) Flax Cone Tweeter 1′ (25mm) ‘M’ profile Aluminum-Magnesium Cabinet Construction 0.6′ (15mm) MDF Finish Vinyl, real walnut and black painting Dimensions with four rubber feet (HxWxD) 12.3 x 7.5 x 9.5′ (312 x 191 x 242mm) Weight 20.7lb (6.5kg)
Reviews
There are no reviews yet.