Mackie Thump215 XT
₹76,818.00 Original price was: ₹76,818.00.₹46,000.00Current price is: ₹46,000.00.
Tech Specs
- Powered:Yes
- Channels:2-channel mixer
- LF Driver Size:15″ high-performance woofer
- HF Driver Size:1″ compression driver
- Total Power:1400W
- Inputs:2 x XLR-1/4″ combo, 1 x 1/8″ TRS
- Outputs:1 x 1/4″
- Bluetooth:Yes
- Wireless:Bluetooth
- Frequency Response:40Hz-20kHz
- Maximum Peak SPL:129dB SPL
- Software:Thump Connect 2 App
- Mounting Options:Pole Mount, Floor Wedge, M10 flypoints
- Power Source:Standard IEC AC cable
- Height:27″
- Width:17.4″
- Depth:14″
- Weight:35.1 lbs.
A New Spin on the Classic Thump Formula
Mackie’s next generation of Thump loudspeakers is redesigned from the ground up to provide you with enhanced power and utility, all at a wallet-friendly price! The Thump215XT Enhanced loudspeaker’s ultra-efficient 1,400-watt class-D amplifier pushes plenty of air through the high-performance 15-inch woofer — a design that live sound pros find is more than capable of handling most small- to medium-sized venues. Next, the 1-inch compression driver ensures that your sound is evenly dispersed, allowing the entire crowd to hear your music with crystal-clear quality. There’s even a built-in feedback eliminator to keep everything noise- and rumble-free! Plus, the Thump215XT is loaded with flexible I/O power, boasting a versatile 2-channel design that can be set up for music ducking, allowing this loudspeaker to extend its utility outside of standard musical applications into the world of public address and education. Finally, the Thump215XT’s Bluetooth compatibility gives you access to effortless music streaming, speaker linking, and enhanced parameter control via the Thump Connect 2 mobile app.
Four voicing modes and Bluetooth compatibility
No matter what live sound environment you’re in, the Thump 215XT’s four application-specific voicing modes have you covered! Music, Live, Club, and Monitor modes optimize your system to excel in any type of venue, and there’s even an Indoor/Outdoor mode setting if you’re looking to take your band’s sound to an outside gig. If you’re after even greater sonic control, then the Thump215XT’s Bluetooth connectivity allows you to stream, link speakers, and access additional sound-shaping features like system EQ, levels, mutes, and much more via the Thump Connect 2 app.
Ultra-efficient class-D power
The Mackie Thump215XT’s ultra-efficient class-D amplification kicks out a powerful sound that defies this loudspeaker’s modest size! A 15-inch woofer dishes out plenty of low-end punch, and the 1-inch compression driver ensures that your sound is evenly dispersed across the entire venue. Lastly, Mackie’s built-in feedback eliminator all but eradicates unwanted speaker screech and rumble, maximizing your sonic potential and ensuring that your show runs smooth from start to finish.
Portable design for easy setup and transport
Weighing in at 35-pounds, the Thump215XT is compact and lightweight, making it easy to transport. The Thump215XT’s small and portable size will ensure that you won’t need a road crew to mount it on a pole or pack it into your car. What’s more, the Thump215XT is housed in a super-tough road-ready enclosure, so don’t think that its light weight makes it fragile!
Mackie Thump215XT Enhanced 1,400-watt Powered Loudspeaker Features:
- 1,400W of class-D amplification is more than loud enough for most small- to medium-sized venues
- 15-inch woofer and 1-inch compression driver deliver a full-range sound with plenty of low end
- Flexible I/O, versatile 2-channel design, and a through output for a wide range of configurations
- Music ducking mode is ideal for public address and education settings
- Angled design is perfect for floor monitoring, but can also be mounted on a standard pole setup
- 4-application specific voicing modes with Indoor/Outdoor modes to excel in any situation
- Bluetooth connectivity allows for music streaming and effortless linking of speakers
- Thump Connect 2 App gives you access to enhanced sound-shaping and utility controls
- Lightweight 35-pound design offers effortless portability
- Signature Mackie durability to withstand the rigors of the road
- Built-in feedback eliminator reduces unwanted screech and rumble
You must be logged in to post a review.
Related products
-
PROEL SESSION4
₹207,380.00Original price was: ₹207,380.00.₹197,000.00Current price is: ₹197,000.00.Add to cartSystem System Type Portable Powered 2.1 System with Two Line Array Tops and One Subwoofer Maximum SPL Output 122 dB peak system output (pink noise) Frequency Response (-10dB) 45Hz – 18kHz Speakers LF Driver 2 x 6.5″ (165mm) woofer in BANDPASS configuration HF Driver 8 x 2.75″ (70mm) neodymium drivers (4 for each TOP) Coverage Pattern 100° x 50° Amplifier Type Class D with SMPS System Power Rating 300 Watts LF, 2×150 Watts HF Continuous, 1200W Peak Channels 2 MIC/LINE selectable inputs Connectors 2 x COMBO (INPUTS), 2 x XLR-M (LINK), 2 x SPEAKON (POWER OUTPUTS) Controls 1 x LCD with Data Encoder Processing 24bit / 48KHz CORE DSP, 2-band EQ Selectable CONFIGURATION and EQ PRESETS, Digital Limiting Wireless Audio Bluetooth built-in receiver General Specifications Cabinet Material Plywood Finishing High-strenght polyurethane black paint Grille Powder coated perforated steel Handles 2 x sides (SUB) Pole Socket 1 x top M20 (SUB), 1 x bottom 35mm (TOP) Included Accessories M20 / 35mm telescopic pole, 4-wire SPEAKON/SPEAKON cable, 2 x SAT cover AC input 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector Dimensions (W x H x D) TOP: 100x358x100 mm, SUB: 420x480x460 mm Weight TOP: 1.5 kg (3.3 lbs), SUB: 22 kg (48.5 lbs), SYSTEM: 25 kg (55.1 lbs) -
PROEL SESSION1
₹44,630.00Original price was: ₹44,630.00.₹42,400.00Current price is: ₹42,400.00.Add to cartMIXER Section MONO inputs 2 x MIC/LINE IN (XLR-F + 1.4″ JACK) STEREO input 1 x LINE IN (MINI-JACK) Outputs LINE OUT (XLR-M) Main EQ SUB LEVEL (SPEECH-MUSIC-BOOST) Internal Effect ECHO-DELAY MULTIMEDIA Section Player Type USB / SD / WIRELESS AUDIO player with TWS Compatible File Formats MP3 Control Interface LCD display, CONTROL buttons AMPLIFIER Section Total Peak Power 400 W Continuous Power 200 W Amplifier Type Class D Power Supply SMPS Processing Analog LOUDSPEAKER Section System Type Compact powered column system with subwoofer High Frequency Device 4 x 2.5″ (66mm) drivers Low Frequency Device 8” (200mm) woofer with 1.5” VC Angular Coverage 90° H x 60° V Frequency Response 50Hz – 18kHz Maximum SPL Output 108 dB GENERAL Specifications Construction Polypropylene Cabinet Colour Black Column system 3-pcs with fast-linking system and integral power connections Handles 1 x subwoofer top Accessories Padded bag for 3-pcs column Dimensions (WxHxD) SUB: 318x 400 x484.5 mm
COLUMN (each piece): 520 X 84 X 97.5 mmWeight 14 Kg (complete system) Power Supply 100 V-240 V~ 50/60 Hz Rated Power Consumption 100 W -
Mackie Thump215
₹66,000.00Original price was: ₹66,000.00.₹41,500.00Current price is: ₹41,500.00.Add to cartTech Specs
- Powered:Yes
- Channels:2-channel mixer
- LF Driver Size:15″ high-performance woofer
- HF Driver Size:1″ compression driver
- Total Power:1400W
- Inputs:2 x XLR-1/4″ combo, 1 x 1/8″ TRS
- Outputs:1 x XLR
- Frequency Response:40Hz-20kHz
- Maximum Peak SPL:129dB SPL
- Mounting Options:Standard pole mount, Floor Wedge
- Power Source:Standard IEC AC cable
- Height:22″
- Width:17.4″
- Depth:14″
- Weight:34.8 lbs.
-
Yamaha STAGEPAS 400BT Portable Bluetooth Speaker
₹80,300.00Add to cartEquipped with a Bluetooth input for wireless audio streaming from smartphones or tablets, the STAGEPAS-BT models let you seamlessly play backing tracks for gigs, or set the tone of parties, conferences, or events with the audio playback of your choice.
- Powered mixer with 2 passive speakers
- Mixing channels – 8, Input channel functions, Feedback suppressor, 1-Knob Master EQ„,4 mono mic / line + 4 mono / 2 stereo line
- SPEAKERS OUT (L, R), MONITOR OUT (L/MONO, R), SUBWOOFER OUT (MONO) with auto HPF
- 400W (200 W + 200 W) (Dynamic), 360W (180W + 180W) (Continuous)
- Two-way bass-relfex speakersTwo-way bass-relfex speakers Frequency range (-10dB) 55 Hz – 20 kHz LF 8″ (20 cm) cone HF 1″ (2.54 cm) voice coil compression driver
- Power requirements 100 V – 240 V 50 Hz/60 Hz Power consumption 30 W (Idle), 70 W (1/8 Power)
Reviews
There are no reviews yet.