Mackie Thump215
Original price was: ₹66,000.00.₹41,500.00Current price is: ₹41,500.00.
Tech Specs
- Powered:Yes
- Channels:2-channel mixer
- LF Driver Size:15″ high-performance woofer
- HF Driver Size:1″ compression driver
- Total Power:1400W
- Inputs:2 x XLR-1/4″ combo, 1 x 1/8″ TRS
- Outputs:1 x XLR
- Frequency Response:40Hz-20kHz
- Maximum Peak SPL:129dB SPL
- Mounting Options:Standard pole mount, Floor Wedge
- Power Source:Standard IEC AC cable
- Height:22″
- Width:17.4″
- Depth:14″
- Weight:34.8 lbs.
A New Spin on the Classic Thump Formula
Mackie’s next generation of Thump loudspeakers is redesigned from the ground up to provide you with enhanced power and utility, all at a wallet-friendly price! The Thump215 loudspeaker’s ultra-efficient 1,400-watt class-D amplifier pushes plenty of air through the high-performance 15-inch woofer — a design that live sound pros find is more than capable of handling most small- to medium-sized venues. Next, the 1-inch compression driver ensures that your sound is evenly dispersed, allowing the entire crowd to hear your music with crystal-clear quality. There’s even a built-in feedback eliminator to keep everything noise- and rumble-free! Plus, the Thump215 is loaded with flexible I/O power, boasting a versatile 2-channel design that can be set up for music ducking, allowing this loudspeaker to extend its utility outside of standard musical applications into the world of public address and education. Finally, like all Mackie products, the Thump215 is built tough to withstand the rigors of the road, and the unloading crew is sure to appreciate the lightweight 34-pound form factor.
Ultra-efficient class-D power
The Mackie Thump215’s ultra-efficient class-D amplification kicks out a powerful sound that defies this loudspeaker’s modest size! A 15-inch woofer dishes out plenty of low-end punch, and the 1-inch compression driver ensures that your sound is evenly dispersed across the entire venue. Lastly, Mackie’s built-in feedback eliminator all but eradicates unwanted speaker screech and rumble, maximizing your sonic potential and ensuring that your show runs smooth from start to finish.
Portable design for easy setup and transport
Weighing in at less than 35 pounds, the Thump215 is compact and lightweight, making it easy to transport. The Thump215’s small and portable size will ensure that you won’t need a road crew to mount it on a pole or pack it into your car. What’s more, the Thump215 is housed in a super-tough road-ready enclosure, so don’t think that its light weight makes it fragile!
Mackie Thump215 1,400-watt Powered Loudspeaker Features:
- 1,400W of class-D amplification is more than loud enough for most small- to medium-sized venues
- 15-inch woofer and 1-inch compression driver deliver a full-range sound with plenty of low end
- Flexible I/O, versatile 2-channel design, and a through output for a wide range of configurations
- Music ducking mode is ideal for public address and education settings
- Angled design is perfect for floor monitoring, but can also be mounted on a standard pole setup
- Lightweight 34-pound design offers effortless portability
- Signature Mackie durability to withstand the rigors of the road
- Built-in feedback eliminator reduces unwanted screech and rumble
You must be logged in to post a review.
Related products
-
Alto Professional TX312
Original price was: ₹57,980.00.₹30,450.00Current price is: ₹30,450.00.Add to cartKey features
- 700 Watts peak (350 Watts continuous) Class D power
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 12-inch (305 mm) LF driver, 2-inch (51 mm) voice coil
- 1-inch (25.4 mm) titanium HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Contour switch with low- and high-frequency +3dB boost
- Ground-lift switch removes unwanted hum or buzz
- Designed and tuned in the USA
-
Alto Professional TS415
Original price was: ₹99,980.00.₹52,490.00Current price is: ₹52,490.00.Add to cartKey Features
- 2500 W peak (1600 LF + 900 HF) 1250 W continuous RMS (800 LF + 450 HF)
- FREE Alto App (iOS/Android) for remote configuration and control
- Bluetooth® audio streaming direct from device
- On-board DSP with 4 Speaker Use modes (inc. Custom EQ via App)
- True Wireless Stereo speaker linking via Bluetooth®
- Integrated 3-channel mixer with dual XLR ¼-inch combo inputs, mic/line switches and independent level controls
- XLR Mix output, Speaker Use, and Sub Size Controls
- 15” driver, 2.5” (63 mm) high-temperature voice coil
- 1” exit ceramic driver with 1.4” (35 mm) coil
- Lightweight enclosure for easy transport, set up and installation
- Versatile design – pole-mountable, wedge monitor or flown application with integral M10 suspension points
- Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
- Designed and tuned in the USA
-
PROEL SESSION6
Original price was: ₹318,955.00.₹303,000.00Current price is: ₹303,000.00.Add to cartSystem System Type Portable Powered 2.1 System with Two Line Array Tops and One Subwoofer Maximum SPL Output 128 dB peak system output (pink noise) Frequency Response (-10dB) 38Hz – 20kHz Speakers LF Driver 2 x 10″ (254mm) woofer HF Driver 12 x 3.25″ (82mm) neodymium drivers (6 for each TOP) Coverage Pattern 120° x 60° Amplifier Type Class D with SMPS System Power Rating 600 Watts LF, 2×300 Watts HF Continuous, 2400W Peak Channels 2 MIC/LINE selectable inputs Connectors 2 x COMBO (INPUTS), 2 x XLR-M (LINK), 2 x SPEAKON (POWER OUTPUTS) Controls 1 x LCD with Data Encoder Processing 24bit / 48KHz CORE DSP, 2-band EQ Selectable CONFIGURATION and EQ PRESETS, Digital Limiting Wireless Audio Bluetooth built-in receiver General Specifications Cabinet Material Plywood Finishing High-strenght polyurethane black paint Grille Powder coated perforated steel Handles 2 x sides (SUB) Pole Socket 1 x top M20 (SUB), 1 x bottom 35mm (TOP) Included Accessories M20 / 35mm telescopic pole, 4-wire SPEAKON/SPEAKON cable, PADDED BAG for SAT AC input 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector Dimensions (W x H x D) TOP: 112x616x132 mm, SUB: 420x580x490 mm Weight TOP: 4.5 kg (9.9 lbs), SUB: 26.5 kg (58.4 lbs) -
PROEL SESSION1FREE
Original price was: ₹55,375.00.₹52,606.00Current price is: ₹52,606.00.Add to cartMIXER Section MONO inputs 2 x MIC/LINE IN (XLR-F + 1.4″ JACK) STEREO input 1 x LINE IN (MINI-JACK) Outputs LINE OUT (XLR-M) Main EQ SUB LEVEL (SPEECH-MUSIC-BOOST) Internal Effect ECHO-DELAY MULTIMEDIA Section Player Type USB / SD / WIRELESS AUDIO player with TWS Compatible File Formats MP3 Control Interface LCD display, CONTROL buttons AMPLIFIER Section Total Peak Power 400 W Continuous Power 200 W Amplifier Type Class D Power Supply SMPS Processing Analog LOUDSPEAKER Section System Type Compact powered column system with subwoofer High Frequency Device 4 x 2.5″ (66mm) drivers Low Frequency Device 8” (200mm) woofer with 1.5” VC Angular Coverage 90° H x 60° V Frequency Response 50Hz – 18kHz Maximum SPL Output 108 dB BATTERY Specifications Battery Type 11.1 V , 8000 mAh , Lithium Battery Battery Life 8 – 10 hours Battery Charging Time 5 – 8 hours GENERAL Specifications
Construction Polypropylene Cabinet Colour Black Column system 3-pcs with fast-linking system and integral power connections Handles 1 x subwoofer top Accessories Padded bag for 3-pcs column Dimensions (WxHxD) SUB: 318x 400 x484.5 mm
COLUMN (each piece): 520 X 84 X 97.5 mmWeight 14 Kg (complete system) Power Supply 100 V-240 V~ 50/60 Hz Rated Power Consumption 100 W
Product Showcase
Reviews
There are no reviews yet.