Kali Audio IN-8 V2 (Pair)
₹99,990.00 Original price was: ₹99,990.00.₹89,990.00Current price is: ₹89,990.00.
- 8-inch powered studio monitor with coaxial 1-inch textile-dome tweeter and 4-inch optimized-profile poly-coated midrange driver
- Improves upon its predecessor with a new amplifier platform, improved transducers, and an upgraded cabinet
- Tri-amped design with integrated Class D power amp
- Ruler-flat frequency response — there’s nothing hyped about this speaker
- Exhibits negligible levels of distortion — a full 6dB lower than its nearest competitor
- Boasts 20dB of headroom while playing continuously at 85dB
- Large magnets and voice coils produce super-accurate low-end response and impressive low-frequency extension
- Coaxial design exhibits superb directivity — better than any non-coaxial design — covering your entire room uniformly
- Low-noise port tube yields clean, punchy bass with zero chuffing
- Boundary EQ enables you to tailor the speaker to any environment
- LF/HF trims for fine-tuning the speaker’s response
- Balanced XLR and TRS inputs, and an unbalanced RCA input
Enjoy accurate and lifelike sound with tons of low end, using the the Kali Audio IN-8 V2, a 3-way studio monitor designed for high-quality mixing, production, and critical listening. Kali prides itself on giving you a fantastic sound on a budget, and the IN-8 V2 lives up to their promise, with lower self-noise, an increased SPL, and smoother top end than the original IN-8.
This monitor offers an 8″ woofer for the low end. Mids and highs are handled in a coincident design, with a 4″ midrange driver and 1″ tweeter nested inside. This driver architecture helps give the monitor a realistic stereo image along with clarity of frequency and transient representation that is essential for professional use. Class-D amplification and a carefully plotted front-port improve clarity and efficiency. Tons of options are on hand for analog connectivity and boundary-EQ settings. The monitor ships with a power cable.
Class-D Amplification Throughout
The IN-8 features a Class-D amp with very little self noise, an upgraded DSP section, and upgraded transducers for better reliability.
Lifelike Stereo Imaging
Because of the coincident placement of the midrange and tweeter and the crossover of the woofer midrange (280 Hz), the IN-8 is an acoustic point source. This gives it an ideal directivity characteristic for a studio monitor. You will be able to hear a very lifelike stereo image with details placed clearly and consistently. Off-axis lobing that is unavoidable in a 2-way system is virtually eliminated.
Excellent Directivity
Substantial work was done to optimize the midrange driver not only for its own acoustic performance, but also for its role as the waveguide for the tweeter. The shape is very precise to allow for controlled directivity at midrange to tweeter crossover, ensuring accurate summing both on and off axis. Excursion on the midrange is limited to less than 1mm peak to peak, so that the oscillation of the midrange does not have a negative effect on the tweeter.
Useful Room Features
The IN-8 incorporates all of the benefits of Kali’s Lone Pine series monitors. These include optimized woofers for powerful clean bass, a front-firing port tube, and boundary-compensated EQ.
You must be logged in to post a review.
Related products
-
Dynaudio LYD 5 (White/Black)
₹65,990.00Original price was: ₹65,990.00.₹59,990.00Current price is: ₹59,990.00.Add to cart- Nearfield Monitor with 5″ Woofer
- Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
- Bass extension settings to extend or curtail the low end frequency response
- Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
- Sound balance to influence the overall response of the speaker
- Handmade in Denmark
-
Dynaudio BM15A (Pair)
₹393,980.00Original price was: ₹393,980.00.₹353,980.00Current price is: ₹353,980.00.Add to cart- Active nearfield monitor with 10″ woofer and 1.1″ silk dome tweeter
- Frequency response 40Hz – 22kHz (+/- 3 dB)
- Maximum SPL at 1 meter, pair (IEC Long Term) – 124 dB RMS
- Maximum SPL at 2 meters, 5.1 (IEC Long Term) – 125.5 dB RMS
- Amplifier power – Tweeter: 100 W / Woofer: 200 W
- Bass reflex cabinet with radius edges on front baffle
- Esotec tweeter with soft dome, rear chamber, magnetic fluid cooled
- One-piece molded polypropylene cone woofer with 4″ pure aluminum wire voice coil
Handcrafted aluminum drivers - 124dB SPL peak power output
- HF & LF analog trim filters
-
Focal Shape 50 (each)
₹80,450.00Original price was: ₹80,450.00.₹76,427.00Current price is: ₹76,427.00.Add to cartSystem SHAPE 50 Frequency response (+/-3dB) 50Hz – 35kHz Maximum SPL (musical signal) 106dB SPL (peak @ 1m) Electronic section Inputs/ Impedance Type XLR: balanced 10kOhms Connectors RCA: unbalanced 10kOhms with sensitivity compensation Midrange and low frequency amplifier 60W, class AB High frequency amplifier 25W, class AB Automatic standby Standby on After approximately 30 minutes with no signal Standby off Signal detection > 3 mV Electrical supply Voltages 220-240V (T800mAL / 250V fuse) or 100-120V (T1.6AL / 250V fuse) Connection IEC plug and detachable power cord Settings High pass filter Adjustable Full range 45/60/90Hz Bass(0 – 250Hz) Adjustable, +/-6dB Midrange/bass(160Hz, Q=1) Adjustable, +/-3dB SHAPE 50 Wall mount K&M® Fixing kit 24471 + K&M® 24359 adapter Ceiling mount K&M® Fixing kit 24496 + K&M® 24359 adapter Table stand / microphone stand K&M® Fixing kit 232 Settings High (4.5 – 35kHz) Adjustable, +/-3dB Power On/Power Of On/off switch on rear panel Standby consumption < 0.5W Displays and controls LED for power on/off and standby Transducers Woofer 5′ (13cm) Flax Cone Tweeter 1′ (25mm) ‘M’ profile Aluminum-Magnesium Cabinet Construction 0.6′ (15mm) MDF Finish Vinyl, real walnut and black painting Dimensions with four rubber feet (HxWxD) 12.3 x 7.5 x 9.5′ (312 x 191 x 242mm) Weight 20.7lb (6.5kg) -
Dynaudio Core 59 (Single)
₹368,990.00Original price was: ₹368,990.00.₹331,990.00Current price is: ₹331,990.00.Add to cart- Studio Refernec Monitor with 1″ Esotar Pro tweeter, 5″ midrange, 9.5″ woofer
- Class D Pascal tri-amplification: HF 150 watts / MF 500 watts / LF 500 watts
- Frequency response: 42Hz–21kHz ±3dB (36Hz–24kHz -6dB)
- Core DSP optimizes imaging, balance, and bass extension
- Sampling rate: 192kHz, resolution: 64-bit; dependent on input signal
- Maximum SPL: 112dB at 1m anechoic, 118dB half space
- Analog and digital inputs
- Front-loaded bass reflex cabinet design
- All drivers handcrafted by Dynaudio in Denmark
Reviews
There are no reviews yet.