Product Showcase
Genelec 8350A SAM Two-way Monitor System
₹358,000.00
SPECIFICATIONS
- Frequency Response: 38 Hz – 20 kHz (± 1.5 dB)
- Low cutoff -6Db: 33 Hz
- High cutoff -6dB: 22 kHz
- Peak SPL: ≥121 dB
- Short term max SPL: ≥112 dB
- Long term max SPL: ≥100 dB
- Self-generated noise: ≤5 dB SPL
- Height: 433 mm (17 1/16 in)
- Height with Iso-Pod: 452 mm (17 25/32 in)
- Width: 286 mm (11 1/4 in)
- Depth: 278 mm (10 15/16 in)
- Weight: 12.8 kg (28.2 lb)
- Enclosure material: Die cast aluminium
- Enclosure type: Reflex port
- Bass Driver type: Cone
- Bass Diameter: 205 mm (8 1/16 in)
- Treble Driver type: Metal dome
- Treble Diameter: 25 mm (3 1/32 in)
- Harmonic distortion: 50…200 Hz ≤2 %, > 100 Hz ≤0.5 %
- 8340A bass amplifier: 200 W Class D
- 8340A treble amplifier: 150 W Class D
- Mains voltage: 100-240 VAC 50/60Hz
- ISS Active: ≤1 W
- Idle: ≤12 W
- Full output: 230 W
- Input: Digital signal input connector XLR female 110 Ohm.
- Input: Digital signal output / Thru connector XLR male 110 Ohm
- Output: Digital signal output / Thru connector XLR male 110 Ohm.
- 2 x Control: Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.
Available on backorder
GENELEC 8350A
All the intelligence of Smart Active Monitoring in an extremely potent nearfield monitor. Introducing the Genelec 8350A.
KEY TECHNOLOGIES
- Active Crossovers
- Directivity Control Waveguide (DCW™) Technology
- Intelligent Signal Sensing (ISS™) Technology
- Iso-Pod™ Stand
- Minimum Diffraction Enclosure (MDE™) Technology
- Optimised Amplifiers
- Protection Circuitry
- Reflex Port Design
- Smart Active Monitor (SAM™) Systems
- Versatile Mountings
MAKE ACCURATE DECISIONS
Boasting high SPL and extended frequency response, the 8350A is crafted to deliver the absolute transparency and neutrality you expect from a Genelec nearfield monitor, and will fit seamlessly into any studio or broadcast environment. With its wide uncoloured sweet spot, it promotes accurate and reliable mix decisions, and its bulletproof durability is essential for mission-critical applications.
POWERFUL BUT CLEVER
As a Smart Active Monitor, the 8350A integrates closely with our GLM software via which it can be configured and calibrated for your listening environment, compensating for detrimental room influences to create a truly optimised monitoring solution from mono to immersive. So if you need to work in challenging acoustic spaces, the 8350A is your powerful but clever monitoring companion.
You must be logged in to post a review.
Related products
-
Kali Audio WS-12 V2 Subwoofer
Original price was: ₹111,900.00.₹99,900.00Current price is: ₹99,900.00.Add to cartFeatures:
- 1,000W, 12″ powered subwoofer
- 23Hz–160Hz frequency response faithfully reproduces your mix’s low-frequency content
- 123dB max SPL — loud enough for 5.1 arrays and light PA use (5.1 systems require an external processor and crossover)
- Built-in limiter circuit protects against unsafe voltage levels
- Small size fits easily under your desk and in most small passenger cars
- Mega-durable 18mm plywood enclosure and roadworthy side handles
- Low-noise port tube yields clean, punchy bass with zero chuffing
- Selectable crossovers every 20Hz between 40Hz and 140Hz for use in a myriad of applications
- Presets for Kali’s LP-6, LP-8, and IN-8 studio monitors, plus LFE and external crossover settings
- 4 preset gain adjustment settings compensate for the sub’s positioning
- Polarity reverse function resolves a common sonic problem
- RCA inputs accommodate consumer-grade devices
- Power-saving standby mode
- Rear-panel jack enables you to use a 3rd-party footswitch to bypass the subwoofer
-
PreSonus Eris Sub8
Original price was: ₹28,800.00.₹25,990.00Current price is: ₹25,990.00.Add to cartFeatures:
● 8-inch, front-firing, paper-composite low-frequency transducer with high-elastisity rubber surround
● Class AB amplifier: 100W peak (50W RMS) power
● Input gain control (-30 dB to +6 dB, continuously variable)
● Continuously variable lowpass filter (50 Hz to 130 Hz)
● Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris Sub8 outputs to the main speakers
● Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs
● Left and right balanced ¼-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers
● Polarity invert switch
● Protection: RF interference, Output-current limiting, Over-temperature, Turn-on/off transient, Subsonic filter, External mains fuse -
Focal Sub6 (each)
Original price was: ₹175,605.00.₹166,824.00Current price is: ₹166,824.00.Read morePerformance Frequency response 30Hz – 250Hz Maximum SPL 116dB SPL (peak @ 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Right, left, LFE
Electronically balanced / 10 kOhmsXLR 3 points socket Adjustable Outputs (towards satellites) Type/Impedance
ConnectorRight, left
Electronically balanced / 50 Ohms
XLR 3 points plugAmplification 350W rms, BASH ® technology Signal internal treatment and functions Subwoofer section Mono right/left summation
LFE + mono low-pass
24dB / octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selectionControl Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 “Bypass” (external remote control)
High-pass frequency selection
Releasable high-passVisualization (LED) Power On Subwoofer switch(mute) Released high-pass Power supply Local supply Connection 230V (1.6A fuse) or 115V (3.15A fuse) Removable CEI supply wire Transducers Subwoofer 11W7670, 105/8′ (27cm) Focal “W” composite sandwich cone driver Cabinetwork Construction 71/2′ (19mm) MDF panels Finish Dark red natural veneering side panels, black body Dimensions (HxLxD) 1415/16 x 139/16 x 175/16′ (380mm x 344mm x 440mm) Weight 50.7lb (23kg) -
Dynaudio Core Sub
Original price was: ₹600,990.00.₹540,990.00Current price is: ₹540,990.00.Add to cart- Unique 4 x 9″ studio subwoofer delivers deep yet ultra-precise low frequencies
- MSP+ (Magnesium Silicate Polymer) Hybrid Drive speakers feature lightweight aluminum construction for extremely low distortion
- Extremely accurate all the way down to 13.5Hz, well below the threshold of human hearing
- Highly efficient 1000W amplifier provides massive headroom
- Analog and AES3 digital inputs let you keep your signal digital right to the end
- 24-bit sampling rate and 192kHz resolution; dependent on input signal
- Core DSP optimizes imaging, balance, and bass extension
- All drivers handcrafted by Dynaudio in Denmark
Reviews
There are no reviews yet.