Sale!
Focal Solo6 Be (each)
₹160,265.00 Original price was: ₹160,265.00.₹152,252.00Current price is: ₹152,252.00.
Performance | ||||||||
Frequency response | 40Hz – 40kHz | |||||||
Maximum SPL | 113dB SPL (peak @ 1m) | |||||||
Electronic section | ||||||||
Inputs |
|
|
||||||
Bass – Midrange Treble | 150W rms, BASH® technology 100W rms, class AB | |||||||
Power supply |
|
|
||||||
User controls and indicators | Input sensitivity selection switch Adjustable tweeter and woofer levels by potentiometers On/off switch, voltage selector | |||||||
Light indicator | Power On LED | |||||||
Transducers | ||||||||
Woofer | 6W4370B, 61/2′ (16.5cm) Focal “W” composite sandwich cone drivers | |||||||
High frequency | TB871, Focal Beryllium inverted dome tweeter | |||||||
Shielding | Integral through cancellation magnets / cans or by magnet design | |||||||
Cabinetwork | ||||||||
Construction | 71/2′ (19mm) MDF panels | |||||||
Finish | Dark red natural veneering side panels, black body | |||||||
Dimensions (HxLxD) | 13 x 97/16 x 117/16′(330mm x 240mm x 290mm) | |||||||
Weight | 24.2lb (11kg) |
2-way monitor
The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5″ “W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control.
Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.
Beryllium inverted dome tweeter
The inverted dome tweeter is a hallmark of Focal. As a result of more than twenty years of development into a tweeter that could produce a high output, but without requiring high energy input and without increasing directivity. The introduction of the pure Beryllium dome, capable of covering 5 full octaves from 1,000 to 40,000Hz constitutes a new decisive advance regarding new audio formats. This tweeter capacity to reproduce high frequencies with unmatched speed and transparency. At first the pure Beryllium tweeter was only available on the very high-end digital speakers of the Focal Professional lines (SM8 & SM11), but is now featured on the new SM6 series, allowing an unprecedented price/performance ratio.
The “W” cone
Focal has been developing the technologies of composite sandwich cones for more than 15 years. The “”W”” process (Glass/Foam/Glass), used on the SM11, SM8 and SM6 lines, provides a true optimiza a true optimization of the frequency response by fine tuning of mass, rigidity and damping parameters. The balance between these 3 fundamental and often contradictory parameters is at the base of the outstanding sound neutrality of our speakers.
A custom designed amplification stage
Designing an amp to be integrated inside a speaker requires a very different set of rules than for a traditional amp. Speaker size and cooling concerns are often in contradiction with the high quality and high power requirements of a sonically transparent speaker. Our engineers used the BASH® technology to develop the bass/medium amplification circuit for the SM6 professional line of speakers. This was the only way to exploit the best of class AB style circuits (for exceptional quality) with a class D type yield, which is crucial when housing a 150W RMS circuit in such a small space (300W RMS for the Twin 6 and 350W RMS for the Sub6). A pure class AB circuit is sufficient to power the -less energy demanding- high frequency tweeter, allowing for an extremely wide bandwidth and exceptional accuracy.
Be the first to review “Focal Solo6 Be (each)” Cancel reply
You must be logged in to post a review.
Related products
-
Dynaudio Core 59 (Single)
₹368,990.00Original price was: ₹368,990.00.₹331,990.00Current price is: ₹331,990.00.Add to cart- Studio Refernec Monitor with 1″ Esotar Pro tweeter, 5″ midrange, 9.5″ woofer
- Class D Pascal tri-amplification: HF 150 watts / MF 500 watts / LF 500 watts
- Frequency response: 42Hz–21kHz ±3dB (36Hz–24kHz -6dB)
- Core DSP optimizes imaging, balance, and bass extension
- Sampling rate: 192kHz, resolution: 64-bit; dependent on input signal
- Maximum SPL: 112dB at 1m anechoic, 118dB half space
- Analog and digital inputs
- Front-loaded bass reflex cabinet design
- All drivers handcrafted by Dynaudio in Denmark
-
Focal Trio6 ST6 (each)
₹367,250.00Original price was: ₹367,250.00.₹348,887.00Current price is: ₹348,887.00.Add to cartPerformance Frequency response 3-way mode 35Hz – 40kHz (+/- 3dB) 2-way mode (Focus) 90Hz – 20kHz (+/- 3dB) Maximum SPL 3-way mode 115dB SPL (peak at 1m) 2-way mode (Focus) 105dB SPL (peak at 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass
Midrange
Treble200W, class G
150W, class G
100W, class ABPower supply Main voltage Wiring 230V (class T fuse 1.6A fuse rating) – 115V (class T fuse 3.5 A fuse rating) Detachable IEC power cable Indicators and controls Rear panel Input sensitivity selector (+4dBu/-10dBV)
Low frequency shelving (+/- 3dB from 35 to 250Hz)
High frequency shelving (+/- 3dB from 4.5 to 40kHz)
EQ low-mid frequencies (+/- 3dB at 160Hz, Q factor = 1)
FOCUS input / FOCUS outputLED Focus mode on, audio clipping and protection indicated by LED on front panel Transducers Subwoofer 8W64701 8′ Focal driver with W composite sandwich cone Woofer 5W04701 5′ Focal driver with W composite sandwich cone Tweeter TB872, 1′ Focal pure Beryllium inverted dome tweeter Cabinet Structure 22mm (0.86′) reinforced panels Finish Dark Red natural Burr-ash veneering side panels, Black body Dimensions including 4 rubber feet (HxWxD) 201/2′ x 1015/16′ x 143/16′ (520 x 278 x 360mm) Weight 44 lbs (20 kg) -
Focal Twin6 be (each)
₹202,850.00Original price was: ₹202,850.00.₹192,708.00Current price is: ₹192,708.00.Add to cartPerformance Frequency response 40Hz – 40kHz Maximum SPL 115dB SPL (peak @ 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass
Bass – Midrange
Treble150W rms, BASH® technology
150W rms, BASH® technology
100W rms, class ABPower supply Local supply Connection 230V (2A fuse)
115V (4A fuse)IEC inlet and detachable power cord User controls and indicators Input sensitivity selector
Midrange driver selector (right/left)
Adjustable tweeter and woofer levels by potentiometers
On/off switch, voltage selectorLight indicator Power On LED Transducers Woofer 2 x 6W4370B, 61/2′ (16.5cm) Focal “W” composite sandwich cone drivers High frequency TB871, Focal Beryllium inverted dome tweeter Shielding Integral through cancellation magnets / cans or by magnet design Cabinetwork Construction 71/2′ (19mm) MDF panels Finish Dark red natural veneering side panels, black body Dimensions (HxLxD) 913/16 x 1911/16 x 133/8′(250mm x 500mm x 340mm) Weight 30.8lb (14kg) -
Focal Shape Twin (each)
₹143,075.00Original price was: ₹143,075.00.₹135,921.00Current price is: ₹135,921.00.Add to cartSystem SHAPE TWIN Frequency response (+/- 3dB) 40Hz – 35kHz Maximum SPL(of musical signals) 110.5dB SPL(peak at @ 1m) Electronics Inputs /Impedance Type RCA connectors XLR: balanced 10 kOhms unbalanced 10 kOhms with sensitivity compensation Mid-range and low frequency amplifier 2 x 80W, class AB High frequency amplifier 50W, class AB Automatic standby Off Deactivate standby Approximately 30 minutes with no signal Signal detection > 3mV Power supply Voltage Connexion 220-240V (fuse T2AL / 250V) or 100-120V (fuse T3.15AL / 250V) IEC connector and detachable power cable Settings High-pass filter Bass level(0 – 250Hz) Midrange/bass(160 Hz, Q=1) Treble level(4.5 – 35kHz) Power on/of Adjustable Full range 45/60/90Hz Adjustable, +/-6 dB Adjustable, +/-3 dB Adjustable, +/-3 dB On/off switch on rear panel Power consumption in standby < 0.5W Displays and controls LED for power on/off and standby Transducers Woofers 2 x 5′ (13cm) Flax Cone woofers Tweeter 1′ (25mm) ‘M’-shaped Aluminum/Magnesium Cabinet Construction 0.6′ (15mm) MDF Finish Vinyl, real walnut and black paint Dimensions including 4 rubber feet (HxLxD) 18.8 x 8.3 x 11′ (478 x 211 x 279mm) Weight 24lbs (11kg) Recommended mounting kits Wall mounting kit K&M® 24471 + K&M® 24359 adapter Ceiling mounting kit K&M® 24496 + K&M® 24359 adapter
Reviews
There are no reviews yet.