Fluid Audio F8S (each)
₹32,975.00 Original price was: ₹32,975.00.₹31,326.00Current price is: ₹31,326.00.
-
Frequency Response: 30-200Hz
-
Total amplifier power: 200 watts
-
Signal-to noise: > 100dB (typical A-weighted)
-
Polarity: positive signal at + input produces outward LF cone displacement
-
Input impedance: 20k ohms balanced, 10k ohms unbalanced
-
Input sensitivity: 85mV pink noise input produces 97dBA output SPL at one meter with volume control at maximum
-
Power: factory programmed for either 100-120V ~60Hz, 220-240V ~50Hz
-
Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external main fuse
-
Cabinet: vinyl-laminated, high acoustic efficient MDF
-
Size: 13.4” x 10” x 10.5”, 340 x 254 x 270mm
-
Weight: 18.7 lbs / 8.5 kg
Fader Series
Designed for recording studios, gaming, home theaters and more, the Fluid Audio F8S active subwoofer delivers exceptional bass response in a compact footprint.
Many types of music benefit from bass extension – from Hip-Hop, to House, to Rock. Being able to hear your mix with this bass extension is critical to accurately creating your music. The F8S subwoofer allows you to hear every detail down to 30Hz – and in a compact size.
Mix Engineers want the confidence to know that their mixes translate well on all types of systems. That is why we included a standby footswitch. With a click of the included foot pedal, you can turn the bass on or off, and audition your mix with bass extension and without.
The F8S also has two built-in EQ settings that allow for two different settings – depending on your music: A more conventional Flat response, as well as a “Punch” setting that is perfect for Dance or other mid-bass heavy music.
For further flexibility, the F8S has a variable phase adjustment to fine tune the phase for optimal matching to your L/R monitors (0-180 degrees), a variable low pass crossover filter control (50-200Hz) and a 80Hz high pass filter (used with foot switch) for satellite connections.
DETAILS
- 200 Watts of class D power with switching power supply
- 8-inch composite paper cone with high temperature voice coil and damped rubber surround
- active subwoofer
- front baffle Fader volume control
- bass-reflex vent port on front baffle for ease of placement
- amplifier standby function to conserve energy
- XLR balanced and 1/4” balanced/unbalanced inputs and RCA inputs
- XLR balanced and 1/4” balanced/unbalanced outputs
- Variable lowpass filter control: 50Hz-200Hz
- Switch for both “Flat” and “Punchy” settings
- 80 Hz highpass filter(with foot switch) for satellite connections
- Included footswitch allows you to turn F8S on and off for auditioning with bass and without
You must be logged in to post a review.
Related products
-
Focal Trio6 Be (each)
₹343,555.00Original price was: ₹343,555.00.₹253,172.00Current price is: ₹253,172.00.Add to cartPerformance Frequency response 3-way mode 35Hz – 40kHz (+/- 3dB) 2-way mode (Focus) 90Hz – 20kHz (+/- 3dB) Maximum SPL 3-way mode 115dB SPL (peak at 1m) 2-way mode (Focus) 105dB SPL (peak at 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass
Midrange
Treble200W, class G
150W, class G
100W, class ABPower supply Main voltage Wiring 230V (class T fuse 1.6A fuse rating) – 115V (class T fuse 3.5 A fuse rating) Detachable IEC power cable Indicators and controls Rear panel Input sensitivity selector (+4dBu/-10dBV)
Low frequency shelving (+/- 3dB from 35 to 250Hz)
High frequency shelving (+/- 3dB from 4.5 to 40kHz)
EQ low-mid frequencies (+/- 3dB at 160Hz, Q factor = 1)
FOCUS input / FOCUS outputLED Focus mode on, audio clipping and protection indicated by LED on front panel Transducers Subwoofer 8W64701 8′ Focal driver with W composite sandwich cone Woofer 5W04701 5′ Focal driver with W composite sandwich cone Tweeter TB872, 1′ Focal pure Beryllium inverted dome tweeter Cabinet Structure 22mm (0.86′) reinforced panels Finish Dark Red natural Burr-ash veneering side panels, Black body Dimensions including 4 rubber feet (HxWxD) 201/2′ x 1015/16′ x 143/16′ (520 x 278 x 360mm) Weight 44 lbs (20 kg) -
Focal Solo6 Be (each)
₹160,265.00Original price was: ₹160,265.00.₹152,252.00Current price is: ₹152,252.00.Add to cartPerformance Frequency response 40Hz – 40kHz Maximum SPL 113dB SPL (peak @ 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass – Midrange Treble 150W rms, BASH® technology 100W rms, class AB Power supply Local supply Connection 230V (1.6A fuse rating)115V (3.5A fuse rating)IEC inlet and detachable power cord IEC inlet and detachable power cord User controls and indicators Input sensitivity selection switch Adjustable tweeter and woofer levels by potentiometers On/off switch, voltage selector Light indicator Power On LED Transducers Woofer 6W4370B, 61/2′ (16.5cm) Focal “W” composite sandwich cone drivers High frequency TB871, Focal Beryllium inverted dome tweeter Shielding Integral through cancellation magnets / cans or by magnet design Cabinetwork Construction 71/2′ (19mm) MDF panels Finish Dark red natural veneering side panels, black body Dimensions (HxLxD) 13 x 97/16 x 117/16′(330mm x 240mm x 290mm) Weight 24.2lb (11kg) -
Dynaudio LYD 7 (Black)
₹88,900.00Original price was: ₹88,900.00.₹79,990.00Current price is: ₹79,990.00.Add to cart- Nearfield Monitor with 7″ Woofer
- Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
- Bass extension settings to extend or curtail the low end frequency response
- Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
- Sound balance to influence the overall response of the speaker
- Handmade in Denmark
-
Dynaudio BM15A (Pair)
₹393,980.00Original price was: ₹393,980.00.₹353,980.00Current price is: ₹353,980.00.Add to cart- Active nearfield monitor with 10″ woofer and 1.1″ silk dome tweeter
- Frequency response 40Hz – 22kHz (+/- 3 dB)
- Maximum SPL at 1 meter, pair (IEC Long Term) – 124 dB RMS
- Maximum SPL at 2 meters, 5.1 (IEC Long Term) – 125.5 dB RMS
- Amplifier power – Tweeter: 100 W / Woofer: 200 W
- Bass reflex cabinet with radius edges on front baffle
- Esotec tweeter with soft dome, rear chamber, magnetic fluid cooled
- One-piece molded polypropylene cone woofer with 4″ pure aluminum wire voice coil
Handcrafted aluminum drivers - 124dB SPL peak power output
- HF & LF analog trim filters
Reviews
There are no reviews yet.