Dynaudio Core Sub
₹481,990.00 Original price was: ₹481,990.00.₹433,990.00Current price is: ₹433,990.00.
- Unique 4 x 9″ studio subwoofer delivers deep yet ultra-precise low frequencies
- MSP+ (Magnesium Silicate Polymer) Hybrid Drive speakers feature lightweight aluminum construction for extremely low distortion
- Extremely accurate all the way down to 13.5Hz, well below the threshold of human hearing
- Highly efficient 1000W amplifier provides massive headroom
- Analog and AES3 digital inputs let you keep your signal digital right to the end
- 24-bit sampling rate and 192kHz resolution; dependent on input signal
- Core DSP optimizes imaging, balance, and bass extension
- All drivers handcrafted by Dynaudio in Denmark
Core Sub is the ideal low-frequency extension for all speakers in the Core studio monitor range.
And when we say ‘low’, we mean it: it digs down with a flat response to 15Hz with a 6dB roll-off at 13.5Hz. There’s no meaningful low frequency that it won’t reproduce utterly faithfully.
Combine its handcrafted cabinet – made at our factory in Denmark – with four of our latest low-frequency drive units and 1000W of Pascal class-D amplification, and you get a subwoofer worthy of supporting the ground-breaking Core speakers.
Power? You’ve got it…
Core Sub uses the same DSP engine found in all the Core speakers, which means you can customise its response based on where it’s placed in the room. Its analogue and AES digital inputs let you calibrate it to work in any configuration from single-channel extension through 2.1-channel bass management and on to a theatrical LFE channel with the headroom to really nail it. Put your Cores in HP and you’re ready to go.
By using the same electronic platform as the rest of the Core products, we can ensure that the Sub’s behaviour and tonality are identical to the monitors – which means you get a totally integrated system, not a separate product just for bass.
It’s physically integrated, too. The design makes it possible to stack more units and combine it with other Core products. You can even use the VESA mount if you want to get it up on the wall. And it’s mix-and-match. For example: add two Subs per side with a Core 47 in between, regulate the dB and all is aligned – both physically and sonically. (Although we can’t promise your gold discs will stay in the same place on the wall.)
Finesse? That too…
Each Sub delivers 120dB, integrating perfectly with the power on offer from the rest of the Core series. It’s versatile, too – it’s digital and analogue, you can stack up to three together and on the top there are indentations to perfectly align any core monitors.
Core Sub has four 9in side-firing handmade Dynaudio hybrid woofers – Dynaudio’s new MSP+ Hybrid Drive units – which are made primarily from aluminium for stiffness, and are designed specifically for subwoofers. To counter ringing from the aluminium, it utilises a dual-action damping system that combines paper dampening on the back of the driver and Dynaudio’s own Magnesium Silicate Polymer material in a dampening cap on the front, ensuring the best performance. This driver is an improved version of the one you find in the highly acclaimed 18s woofer. The quest was simple; make the best bass driver possible.
Make no mistake: Core Sub isn’t just another boom-box. This is a highly accurate low-frequency delivery system.
Get ready to be moved. Literally.
Tech Specs
- Powered: Yes
- Speaker Size: 9″
- Driver Type: Magnesium Silicate Polymer
- Total Power : 1000W
- Maximum Peak SPL: 120 dB SPL @ 1m
- Input Types: 1 x XLR, 1 x XLR (AES/EBU)
- Output Types: 1 x XLR
- USB: 1 x Type B
- Enclosure Type: Sealed
- Enclosure Material: MDF Double Front Baffle
- Height: 20.25″
- Width: 15.3″
- Depth: 14.3″
- Weight: 105.8 lbs.
You must be logged in to post a review.
Related products
-
Alto Professional TX308
₹34,980.00Original price was: ₹34,980.00.₹18,350.00Current price is: ₹18,350.00.Add to cartKey features
- 350 Watts peak, (175 Watts continuous Class D power)
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 8-inch (203 mm) LF driver, 1.4-inch (35.5 mm) voice coil
- 1-inch (25.4 mm) titanium diaphragm HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Designed and tuned in the USA
-
PROEL V12PLUS
₹56,390.00Original price was: ₹56,390.00.₹53,571.00Current price is: ₹53,571.00.Add to cartSystem type 2-way vented enclosure High Frequency Device 1” neodimyium compression driver Low Frequency Device 12” woofer with 2.5” voice coil Angular Coverage 90° H x 60° V Total peak power 600 W HF Amplifier Continuous Power 50 W Class AB LF Amplifier Continuous Power 250 W Class D Power Supply SMPS Processing Analog Frequency Response 50 Hz – 20 kHz Max SPL 124 dB Connectors IN: COMBO, LINK: XLR M Controls LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT, FRONT LED selector Monitor Taper 44° Flying System 4 x M10 – top/bottom Construction Polypropylene Cabinet Colour Black Handles 1 x top Mounting Pole 1 x bottom Power Supply 230 VAC or 120 VAC 50/60 Hz -
PROEL SESSION4
₹207,380.00Original price was: ₹207,380.00.₹197,000.00Current price is: ₹197,000.00.Add to cartSystem System Type Portable Powered 2.1 System with Two Line Array Tops and One Subwoofer Maximum SPL Output 122 dB peak system output (pink noise) Frequency Response (-10dB) 45Hz – 18kHz Speakers LF Driver 2 x 6.5″ (165mm) woofer in BANDPASS configuration HF Driver 8 x 2.75″ (70mm) neodymium drivers (4 for each TOP) Coverage Pattern 100° x 50° Amplifier Type Class D with SMPS System Power Rating 300 Watts LF, 2×150 Watts HF Continuous, 1200W Peak Channels 2 MIC/LINE selectable inputs Connectors 2 x COMBO (INPUTS), 2 x XLR-M (LINK), 2 x SPEAKON (POWER OUTPUTS) Controls 1 x LCD with Data Encoder Processing 24bit / 48KHz CORE DSP, 2-band EQ Selectable CONFIGURATION and EQ PRESETS, Digital Limiting Wireless Audio Bluetooth built-in receiver General Specifications Cabinet Material Plywood Finishing High-strenght polyurethane black paint Grille Powder coated perforated steel Handles 2 x sides (SUB) Pole Socket 1 x top M20 (SUB), 1 x bottom 35mm (TOP) Included Accessories M20 / 35mm telescopic pole, 4-wire SPEAKON/SPEAKON cable, 2 x SAT cover AC input 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector Dimensions (W x H x D) TOP: 100x358x100 mm, SUB: 420x480x460 mm Weight TOP: 1.5 kg (3.3 lbs), SUB: 22 kg (48.5 lbs), SYSTEM: 25 kg (55.1 lbs) -
Alto Professional TX310
₹41,980.00Original price was: ₹41,980.00.₹22,100.00Current price is: ₹22,100.00.Add to cartKey features
- 350 Watts peak, (175 Watts continuous Class D power)
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 10-inch (254 mm) LF driver, 1.5-inch (38.1 mm) voice coil
- 1-inch (25.4 mm) titanium diaphragm HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Designed and tuned in the USA
Reviews
There are no reviews yet.