Dynaudio BM15A (Pair)
Original price was: ₹393,980.00.₹353,980.00Current price is: ₹353,980.00.
- Active nearfield monitor with 10″ woofer and 1.1″ silk dome tweeter
- Frequency response 40Hz – 22kHz (+/- 3 dB)
- Maximum SPL at 1 meter, pair (IEC Long Term) – 124 dB RMS
- Maximum SPL at 2 meters, 5.1 (IEC Long Term) – 125.5 dB RMS
- Amplifier power – Tweeter: 100 W / Woofer: 200 W
- Bass reflex cabinet with radius edges on front baffle
- Esotec tweeter with soft dome, rear chamber, magnetic fluid cooled
- One-piece molded polypropylene cone woofer with 4″ pure aluminum wire voice coil
Handcrafted aluminum drivers - 124dB SPL peak power output
- HF & LF analog trim filters
The BM15A is a revolutionary nearfield monitor offering exceptionally high performance. Its full range extended bass response makes it the perfect nearfield monitor, particularly for commercial studios, project studios and post production facilities.
The BM15A is a relatively large 2-way active system comprising of a large 240mm (10″) woofer, a special version of the Dynaudio ESOTEC soft dome tweeter and an electronic phase-aligned crossover, which feeds the build-in dual, high performance discrete MOSFET amplifiers.
The ESOTEC HF driver spells quality and headroom due to a dynamic headroom of 1000W, and the 240mm (10″) bass driver is world-renowned for its 100mm (4″) aluminium alloy voice coil, which outperforms most 300mm (12″) drivers in terms of power output and sheer punch.
The electronics offer complex protection circuitry helping to prevent accidental damage to the drivers, while still providing maximum transient response.
The BM15A monitor is front ported for powerful and extended low frequency response, and the elegant matte cabinet has radius edges on the front baffle to reduce boundary effects and improve the overall sound quality.
100% custom-designed and built drivers, cabinets and electronics
Like all Dynaudio monitors, the BM15A is completely custom-designed and built to assure a perfect match of components. The drivers are specifically designed to avoid acoustic and performance problems that would require extensive manipulation of crossovers to correct. The cabinets are crafted in Dynaudio’s Denmark facility and minimize resonance while enhancing bass response. And the BM15A’s crossovers, protection circuitry and power amplifiers all are optimized for maximum performance, phase-coherent reproduction and high SPLs.
A 10″ woofer that outperforms most 12″ drivers
Key to the BM15A is its 10″ low frequency driver. Dynaudio molds its cone of Magnesium Silicate Polymer with their special “flat cone” geometry for outstanding transient response and minimal breakup. With a cast aluminum frame, oversized vented magnet and 4″ aluminium alloy voice coil this driver outperforms most 12″ speakers in terms of power output and sheer punch. In fact, the BM15A delivers clean, tight bass response down to 30Hz.
Master-built bass reflex cabinet
Also built in Dynaudio’s plant, the BM15A enclosure is constructed of hand-selected premium woods and quality veneers. Its front bass port contributes to the BM15A’s solid low frequencies. Radius edges on the front baffle reduce boundary effects and improve the overall sound quality. And with its elegant matte finish the BM15A looks every bit as good as it sounds!
Precision electronics for the cleanest possible signal
Thanks to its custom-designed phase-coherent electronic crossover with a 30dB per octave slope the BM15A offers a seamless transition between drivers. You’ve got plenty of power from the built-in high performance discrete MOSFET amplifiers, with 200 watts for the low frequency driver and 100 watts for highs. Precision protection circuitry ensures the drivers are safe from damage. If you demand ultimate quality in sound reproduction you don’t want to miss the BM15A!
Specifications:
- Powered Yes
- Power Configuration Bi-amped
- LF Driver Size 9″
- LF Driver Type Cone
- LF Driver Material Polypropylene
- HF Driver Size 1.1″
- HF Driver Type Soft Dome
- HF Driver Material Aluminum
- LF Driver Power Amp 200W
- HF Driver Power Amp 100W
- Total Power 300W
- Frequency Range 40Hz – 22kHz
- Crossover Frequency 1800 Hz 30 dB/Oct
- Maximum Peak SPL 124dB
- Enclosure Type Ported
- Input Types 1 x XLR
- Height 17.9″
- Width 11.4″
- Depth 15.2″
- Weight 41 lbs.
You must be logged in to post a review.
Related products
-
Dynaudio Core 59 (Single)
Original price was: ₹368,990.00.₹331,990.00Current price is: ₹331,990.00.Add to cart- Studio Refernec Monitor with 1″ Esotar Pro tweeter, 5″ midrange, 9.5″ woofer
- Class D Pascal tri-amplification: HF 150 watts / MF 500 watts / LF 500 watts
- Frequency response: 42Hz–21kHz ±3dB (36Hz–24kHz -6dB)
- Core DSP optimizes imaging, balance, and bass extension
- Sampling rate: 192kHz, resolution: 64-bit; dependent on input signal
- Maximum SPL: 112dB at 1m anechoic, 118dB half space
- Analog and digital inputs
- Front-loaded bass reflex cabinet design
- All drivers handcrafted by Dynaudio in Denmark
-
Focal Shape 65 (each)
Original price was: ₹103,465.00.₹98,291.00Current price is: ₹98,291.00.Add to cartSystem SHAPE 65 Frequency response (+/-3dB) 40Hz – 35kHz Maximum SPL (musical signal) 109dB SPL (peak @ 1m) Electronic section Inputs/ Impedance Type XLR: balanced 10kOhms Connectors RCA: unbalanced 10kOhms with sensitivity compensation Midrange and low frequency amplifier 80W, class AB High frequency amplifier 25W, class AB Automatic standby Standby on After approximately 30 minutes with no signal Standby off Signal detection > 3 mV Electrical supply Voltages 220-240V (T1AL / 250V fuse) or 100-120V (T2AL / 250V fuse) Connection IEC plug and detachable power cord Settings High pass filter Adjustable Full range 45/60/90Hz Bass(0 – 250Hz) Adjustable, +/-6dB Midrange/bass(160Hz, Q=1) Adjustable, +/-3dB SHAPE 65 Wall mount K&M® Fixing kit 24471 + K&M® 24357 adapter Ceiling mount K&M® Fixing kit 24496 + K&M® 24359 adapter Settings
High (4.5 – 35kHz) Adjustable, +/-3dB Power On/Power Of Settings High (4.5 – 35kHz) Adjustable, +/-3dB Power On/Power Of On/off switch on rear panel Standby consumption< 0.5W Displays and controlsLED for power on/off and standbyTransducers Woofer6.5′ (16,5cm) Flax ConeTweeter 1′ (25mm) ‘M’ profile Aluminum-MagnesiumCabinet Construction0.6′ (15mm) MDF FinishVinyl, real walnut and black paintingDimensions with four rubber feet (HxWxD) 14 x 8.6 x 11.2′ (355 x 218 x 285mm)Weight 28.2lb (8.5kg)On/off switch on rear panel
-
Focal Shape 50 (each)
Original price was: ₹80,450.00.₹76,427.00Current price is: ₹76,427.00.Add to cartSystem SHAPE 50 Frequency response (+/-3dB) 50Hz – 35kHz Maximum SPL (musical signal) 106dB SPL (peak @ 1m) Electronic section Inputs/ Impedance Type XLR: balanced 10kOhms Connectors RCA: unbalanced 10kOhms with sensitivity compensation Midrange and low frequency amplifier 60W, class AB High frequency amplifier 25W, class AB Automatic standby Standby on After approximately 30 minutes with no signal Standby off Signal detection > 3 mV Electrical supply Voltages 220-240V (T800mAL / 250V fuse) or 100-120V (T1.6AL / 250V fuse) Connection IEC plug and detachable power cord Settings High pass filter Adjustable Full range 45/60/90Hz Bass(0 – 250Hz) Adjustable, +/-6dB Midrange/bass(160Hz, Q=1) Adjustable, +/-3dB SHAPE 50 Wall mount K&M® Fixing kit 24471 + K&M® 24359 adapter Ceiling mount K&M® Fixing kit 24496 + K&M® 24359 adapter Table stand / microphone stand K&M® Fixing kit 232 Settings High (4.5 – 35kHz) Adjustable, +/-3dB Power On/Power Of On/off switch on rear panel Standby consumption < 0.5W Displays and controls LED for power on/off and standby Transducers Woofer 5′ (13cm) Flax Cone Tweeter 1′ (25mm) ‘M’ profile Aluminum-Magnesium Cabinet Construction 0.6′ (15mm) MDF Finish Vinyl, real walnut and black painting Dimensions with four rubber feet (HxWxD) 12.3 x 7.5 x 9.5′ (312 x 191 x 242mm) Weight 20.7lb (6.5kg) -
Focal Twin6 be (each)
Original price was: ₹202,850.00.₹192,708.00Current price is: ₹192,708.00.Add to cartPerformance Frequency response 40Hz – 40kHz Maximum SPL 115dB SPL (peak @ 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass
Bass – Midrange
Treble150W rms, BASH® technology
150W rms, BASH® technology
100W rms, class ABPower supply Local supply Connection 230V (2A fuse)
115V (4A fuse)IEC inlet and detachable power cord User controls and indicators Input sensitivity selector
Midrange driver selector (right/left)
Adjustable tweeter and woofer levels by potentiometers
On/off switch, voltage selectorLight indicator Power On LED Transducers Woofer 2 x 6W4370B, 61/2′ (16.5cm) Focal “W” composite sandwich cone drivers High frequency TB871, Focal Beryllium inverted dome tweeter Shielding Integral through cancellation magnets / cans or by magnet design Cabinetwork Construction 71/2′ (19mm) MDF panels Finish Dark red natural veneering side panels, black body Dimensions (HxLxD) 913/16 x 1911/16 x 133/8′(250mm x 500mm x 340mm) Weight 30.8lb (14kg)
Product Showcase
Reviews
There are no reviews yet.