BOSS VB-2W Vibrato
₹29,651.00
Specifications
- Modes:
3 modes
- LATCH
- UNLATCH
- BYPASS
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
Output Section:
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
Bypass:
- Buffered bypass
Controls:
- Pedal switch
- Standard/Custom switch
- RATE knob
- DEPTH knob
- RISE TIME knob
- MODE knob
Indicator:
- CHECK indicator (Serves also as battery check indicator)
Connectors:
- INPUT jack
- OUTPUT jack
- DEPTH jack
- DC IN jack
Power Supply:
- Alkaline battery (9V, 6LR61) or Carbon-zinc battery (9V, 6F22)
- AC adaptor (sold separately)
- Current Draw: 35 mA
- Expected battery life under continuous use:
- Alkaline: Approx. 22 hours
- Carbon: Approx. 4 hours
These figures will vary depending on the actual conditions of use.
Accessories:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTE,” and “Information”)
- Alkaline battery (9V, 6LR61)
Options (sold separately):
- AC adaptor: PSA series
- Expression Pedal: FV-500H, FV-500L, Roland EV-5
Size and Weight:
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (including battery): 450 g (1 lb)
Available on backorder
True Vibrato Expression, Reborn with Waza Innovation
Ahead of its time when it debuted in 1982, the VB-2 Vibrato has been rediscovered by modern players looking to create unique guitar textures with stompbox effects. Thanks to its expressive, one-of-a-kind sound, this rare pedal has gone on to become one of the most valuable BOSS effects in the vintage market. Now, the progressive spirit of the VB-2 has been reborn as the Waza Craft VB-2W. Using all-analog circuitry, the VB-2W authentically reproduces the true pitch-shifted vibrato of the original pedal, and also adds an innovative new vibrato mode and real-time control function for enhanced expression.
- Waza Craft innovation for a premium analog tone experience
- Custom mode features a totally new vibrato sound with unique filter wave
- Standard mode provides a true reproduction of the vintage VB-2 Vibrato sound
- All-analog circuit with BBD (bucket brigade) vibrato line
- Control the effect depth in real time with an optional expression pedal
- Rise Time knob to control the initial onset of the vibrato effect
- Unlatch mode activates the effect only while pressing the pedal, ideal for adding vibrato to specific notes and chords
- Bypass mode takes the BBD out of the signal path to eliminate latency when the effect is off
- Made in Japan
- BOSS five-year warranty
Waza Craft: The Art of Superior Tone
Since the beginning, the engineers at BOSS have been committed to achieving the finest guitar tones using any technology necessary, from old-school analog circuits to high-tech DSP. Continuing this enthusiastic spirit, we are pleased to introduce the Waza Craft series. In Japan, “Waza” is the term for art and technique, and these special edition pedals proudly carry the Waza symbol to represent the pinnacle of BOSS design and craftsmanship. Being made in Japan, the Waza Craft series brings you exceptional tone and touch response through carefully selected analog components, refined circuitry, and meticulous attention to detail.
You must be logged in to post a review.
Related products
-
BOSS Bass Multiple Effects ME-90B
₹42,934.00Add to cartAudio Specifications:
- Sampling Frequency: 48 kHz
- AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converters. - DA Conversion: 32 bits
- Processing: 32-bit floating point
- Effects: 93 Types
- Memories: 36 (User) + 36 (Preset)
- Phrase Loop: 38 sec. (MONO)
- Internal Tuning Detection Accuracy: ±0.1 cent
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- RETURN: -10 dBu
- Maximum Input Level:
- INPUT: +7 dBu
- RETURN: +7 dBu
- Input Impedance:
- INPUT: 1 M ohm
- RETURN: 1 M ohm
- Nominal Output Level:
- OUTPUT L/MONO, R: -10 dBu
- PHONES: -10 dBu
- SEND: -10 dBu
- BALANCED OUTPUT: -10 dBu
- Output Impedance:
- OUTPUT L/MONO, R: 1 k ohm
- PHONES: 44 ohms
- SEND: 1 k ohm
- BALANCED OUTPUT: 600 ohms
- Recommended Load Impedance:
- OUTPUT L/MONO, R: 10 k ohms or greater
- PHONES: 44 ohms or greater
- SEND: 10 k ohms or greater
- BALANCED OUTPUT: 600 ohms or greater
Controls and Display:
- Buttons:
- BANK▼/AMP/EQ switch, BANK▲/MOD switch, CTL/BLEND switch
- MEMORY/MANUAL switch, 1/COMP switch, 2/FILTER switch
- 3/DRV/SYN switch, 4/DLY/REV switch, PEDAL FX switch
- GND LIFT switch, AMP/LINE switch, POWER switch
- EXIT button, WRITE button, CTL button, EDIT button
- Knobs:
- PREAMP TYPE knob, BASS knob, MIDDLE knob, TREBLE knob, GAIN knob, LEVEL knob
- MOD TYPE knob, TYPE knob, RATE/TIME knob, DEPTH/DUTY/FB knob, E.LEV/RESO knob, BLEND knob
- COMP/FX1 TYPE knob, SUSTAIN/LOW/-1OCT knob, ATTACK/HIGH/-2OCT knob, LEVEL/DIRECT knob
- FILTER/FX2 TYPE knob, SENS/RATE/KEY knob, TONE/DEPTH/HRM knob, PEAK/LEVEL/RESO knob
- DRIVE/SYNTH TYPE knob, DRIVE knob, TONE knob, LEVEL knob
- DLY/REV TYPE knob, TIME knob, FEEDBACK/TONE knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob
- Pedal:
- PEDAL FX pedal
- Display:
- 7 segments, 2 characters (LED)
- Tuning guides (LED)
Connectors:
- Input/Output Connectors:
- INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
- BALANCED OUTPUT jack: XLR type
- PHONES jack: Stereo miniature phone type
- Control and Expansion:
- USB COMPUTER port: USB Type-C®
- Bluetooth® ADAPTOR connector: Dedicated connector
- DC IN jack
Power and Size:
- Power Supply:
- Alkaline battery (AA, LR6) x 4 or AC adaptor
- Current Draw: 195 mA
- Expected Battery Life Under Continuous Use:
- Alkaline battery: Approximately 6 hours
This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
- Alkaline battery: Approximately 6 hours
- Size:
- Width: 443 mm (17-1/2 inches)
- Depth: 220 mm (8-11/16 inches)
- Height: 67 mm (2-11/16 inches)
- Maximum Height: 93 mm (3-11/16 inches)
- Weight: 2.9 kg (6 lb 7 oz)
Accessories and Options (Sold Separately):
- Included Accessories:
- STARTUP GUIDE
- Alkaline battery (AA, LR6) x 4
- Leaflet “USING THE UNIT SAFELY”
- Options:
- AC adaptor: PSA-S series
- Bluetooth® Audio MIDI Dual Adaptor: BT-DUAL
- Carry Bag: CB-ME80, CB-BU10
-
BOSS Guitar Effects Processor GX-10
₹48,147.00Original price was: ₹48,147.00.₹43,332.00Current price is: ₹43,332.00.Add to cartAudio Specifications:
- Sampling Frequency: 48 kHz
- AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters. - DA Conversion: 32 bits
- Processing: 32-bit floating point
- Effects: 170 types
- Maximum Number of Effects: 15+3 (DIVIDER/MIXER, SEND/RETURN, PHRASE LOOP)
Dependent on circumstances - Memories: 198 (User) + 99 (Preset)
- Phrase Loop:
- 38 sec. (MONO)
- 19 sec. (STEREO)
- Tuner Internal Detection: +/- 0.1 cent
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- RETURN: -10 dBu
- Maximum Input Level:
- INPUT: +7 dBu
- RETURN: +7 dBu
- Input Impedance:
- INPUT: 1 M ohm
- RETURN: 1 M ohm
- Nominal Output Level:
- OUTPUT (L/MONO, R): -10 dBu
- PHONES: -10 dBu
- SEND: -10 dBu
- Output Impedance:
- OUTPUT (L/MONO, R): 1 k ohm
- PHONES: 44 ohms
- SEND: 1 k ohm
- Recommended Load Impedance:
- OUTPUT (L/MONO, R): 10 k ohms or greater
- PHONES: 44 ohms or greater
- SEND: 10 k ohms or greater
Controls and Display:
- Buttons:
- DOWN switch, UP switch, CTL1 switch, POWER switch, EXP1 switch
- PAGE button, MENU button, EFFECTS button, EXIT button, WRITE button
- Knobs:
- 1-4 knobs, SELECT knob, OUTPUT LEVEL knob
- Expression Pedal: EXP1 pedal (supported)
- Display:
- Color Graphic LCD (480 x 272 dots) Touch screen
Connectors:
- Input/Output Connectors:
- INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
- PHONES jack: Stereo 1/4-inch phone type
- Control and Expansion:
- CTL2,3/EXP2 jack
- USB Port:
- USB COMPUTER port: USB Type-C®
- Bluetooth®:
- Bluetooth® ADAPTOR connector: Dedicated connector
- Power Input:
- DC IN jack
Power and Size:
- Power Supply: AC adaptor
- Current Draw: 600 mA
- Power Consumption in OFF Mode: 0.0 W
(When the power automatically turns off) - Size:
- Width: 300 mm (11-13/16 inches)
- Depth: 183 mm (7-3/16 inches)
- Height: 74 mm (2-15/16 inches)
- Maximum Height: 96 mm (3-3/4 inches)
- Weight: 2.2 kg (4 lbs 14 oz)
Accessories and Options (Sold Separately):
- Accessories Included:
- AC adaptor (PSB-1U + AC Cord Set)
- Owner’s manual
- Leaflet “USING THE UNIT SAFELY”
- Options:
- Footswitch: FS-5U, FS-5L, FS-6, FS-7
- Expression Pedals: EV-30, FV-500L, FV-500H, Roland EV-5
- Bluetooth® Audio MIDI Dual Adaptor (Model BT-DUAL)
- Wireless MIDI Expression Pedal: EV-1-WL
- Wireless Foot Switch: FS-1-WL
-
BOSS Audio RC-300 Loop Station
₹76,963.00Original price was: ₹76,963.00.₹57,000.00Current price is: ₹57,000.00.Add to cart- Three stereo tracks with dedicated footswitches and controls for each
- Dedicated fader per track
- Expression pedal for effects control in real time
- Up to three hours of internal recording and 99 onboard memories
- 16 onboard effects optimized for looping
- XLR Microphone input with phantom power
- USB storage; import/export WAV files
-
BOSS Guitar Effects Processor GT-1000
₹131,409.00Original price was: ₹131,409.00.₹118,300.00Current price is: ₹118,300.00.Add to cartAudio Specifications:
- Sampling Frequency: 96 kHz
- AD Conversion: 32 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters. - DA Conversion: 32 bits
- Effects: 185 types
- Patches: 250 (User) + 250 (Preset)
- Phrase Loop:
- 38 sec. (MONO)
- 19 sec. (STEREO)
- Tuner Internal Detection: +/- 0.1 cent
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- RETURN1: -10 dBu
- RETURN2: -10 dBu
- Maximum Input Level:
- INPUT: +18 dBu
- RETURN1: +8 dBu
- RETURN2: +8 dBu
- Input Impedance:
- INPUT: 1 M ohm
- RETURN1: 1 M ohm
- RETURN2: 1 M ohm
- Nominal Output Level:
- MAIN OUTPUT (L/MONO, R): -10 dBu
- SUB OUTPUT (L, R): +4 dBu
- PHONES: -10 dBu
- SEND1: -10 dBu
- SEND2: -10 dBu
- Output Impedance:
- MAIN OUTPUT (L/MONO, R): 1 k ohm
- SUB OUTPUT (L, R): 600 ohms
- PHONES: 20 ohms
- SEND1: 1 k ohm
- SEND2: 1 k ohm
- Recommended Load Impedance:
- MAIN OUTPUT (L/MONO, R): 10 k ohms or greater
- SUB OUTPUT (L, R): 600 ohms or greater
- PHONES: 44 ohms or greater
- SEND1: 10 k ohms or greater
- SEND2: 10 k ohms or greater
Controls and Display:
- Buttons:
- DOWN switch, UP switch
- CTL1–3 switches, 1–5 switches, POWER switch
- EFFECT button, MENU button, EXIT button, WRITE button, PAGE button
- Knobs:
- 1–6 knobs, OUTPUT LEVEL knob
- Expression Pedal: Supported (see options)
- Display:
- Graphic LCD (512 x 160 dots, backlit LCD)
Connectors:
- Input/Output Connectors:
- INPUT jack, MAIN OUTPUT (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type
- SUB OUTPUT (L, R) connectors: XLR type
- PHONES jack: Stereo 1/4-inch phone type
- Control and Expansion:
- CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type
- USB Port: USB B type (for computer connection)
- Power Input: DC IN jack
- MIDI: IN, OUT connectors
Power and Size:
- Power Supply: AC adaptor (PSB-1U + AC Cord Set)
- Current Draw: 1.2 A
- Power Consumption in OFF Mode: 0.0 W
- Size:
- Width: 462 mm (18-3/16 inches)
- Depth: 248 mm (9-13/16 inches)
- Height: 70 mm (2-13/16 inches)
- Maximum height: 95 mm (3-3/4 inches)
- Weight: 3.6 kg (7 lbs 15 oz)
Accessories and Options (Sold Separately):
- Footswitches: FS-5U, FS-5L, FS-6, FS-7
- Expression Pedals: EV-30, FV-500L, FV-500H, Roland EV-5
- AC Adaptor: PSB-1U
Additional Notes:
- AC Adaptor Region Compatibility:
- When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be used, and the voltage supplied there.
PSB-120/PSB-120TW/PSB-230EU/PSB-230UK/PSB-240A
- When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be used, and the voltage supplied there.
Reviews
There are no reviews yet.