“BOSS KATANA-HEAD MKII Guitar Amplifier” has been added to your cart. View cart
BOSS LMB-3 Bass Limiter/Enhancer
₹11,655.00
Tuning and Signal Features:
- Nominal Input Level: -20 dBu, which is typical for guitar-level input.
- Input Impedance: 1 M ohm, suitable for high-impedance instruments like electric guitars and basses.
- Nominal Output Level: -20 dBu.
- Output Impedance: 1 k ohm, which is standard for pedals to be connected to amplifiers or other audio gear.
- Recommended Load Impedance: 10 k ohms or greater, ensuring compatibility with most amplifiers and other equipment.
Bypass:
- Buffered Bypass: Ensures that the signal remains intact when the pedal is turned off, preserving sound quality.
Controls:
- THSHD Knob: Likely controls the threshold of the compressor, setting the level at which compression begins to take effect.
- RATIO Knob: Adjusts the compression ratio, controlling how much compression is applied once the threshold is surpassed.
- ENHANCE Knob: This could adjust the tonal character or presence of the signal, often used to add brightness or “shine.”
- LEVEL Knob: Sets the output level of the compressed signal, allowing for volume adjustments after compression is applied.
- Pedal Switch: Used to engage or bypass the effect.
Power Supply:
- Battery Options:
- Carbon-zinc 9V battery (6F22).
- Alkaline 9V battery (6LR61).
- AC Adaptor: PSA series (sold separately).
- Current Draw:
- 25 mA, which is relatively low, meaning the pedal consumes little power.
- Expected Battery Life:
- Carbon-zinc: Approx. 5 hours of continuous use.
- Alkaline: Approx. 10.5 hours of continuous use.
Indicators:
- CHECK Indicator: Shows when the battery is low or needs to be replaced. It can also be used to verify the pedal’s status.
Connectors:
- INPUT Jack: 1/4-inch phone type for connecting instruments or line-level sources.
- OUTPUT Jack: 1/4-inch phone type for sending the processed signal to an amplifier or next device.
- DC IN Jack: For connecting an external power source (AC Adaptor, PSA series).
Accessories:
- Included: Leaflet with safety and usage instructions, 9V Carbon-zinc battery (6F22).
- Optional: AC Adaptor (PSA series, sold separately).
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (including battery): 380 g (14 oz).
Smooth Tone, Every Time
The LMB-3 affords complete control over a bass guitar’s dynamic range using a limiter effect and an enhancer circuit designed specifically for electric bass.
- Full control of bass guitar’s dynamic range via threshold level and ratio knobs
- Enhancer provides increased bass clarity and presence
- AC adaptor or 9V battery operation
- BOSS five-year warranty
Be the first to review “BOSS LMB-3 Bass Limiter/Enhancer” Cancel reply
You must be logged in to post a review.
Categories: BOSS, Single Units
Related products
-
Boss RC-5 Loop Station Pedal
₹25,838.00Add to cartStandard Features
- Advanced BOSS looping features in a compact footprint
- Class-leading sound quality with 32-bit AD/DA and 32-bit floating-point processing
- Stereo looper engine with 13 hours of recording time
- LCD with multi-color backlight for viewing loop status and editing parameters
- Reverse function for infusing loops with interesting textures
- Seven different drum kits and 57 preset rhythms with A/B variations
- Support for expanded control via external footswitches, an expression pedal, or MIDI
- Full MIDI I/O provided with space-saving mini TRS jacks (BMIDI-5-35 adaptor cable available separately)
- Onboard storage for 99 phrase memories
- Back up and load WAV loops via USB
-
Boss GX-100 Guitar Effects Processor
₹71,513.00Original price was: ₹71,513.00.₹64,361.00Current price is: ₹64,361.00.Add to cartStandard Features
- Powerful, easy-to-use amp/effects processor for guitar and bass
- Exceptional audio quality with 24-bit AD and 32-bit DA conversion, 32-bit floating-point processing, and 48 kHz sampling rate
- Authentic tube amplifier tone and touch response with AIRD technology
- 23 amplifier types and over 150 BOSS effects
- Ultra-flexible amp/effect routing with 15 assignable blocks
- Wide selection of onboard speaker types and support for loading WAV speaker IRs
- Streamlined modern design with intuitive color touch display and rugged metal chassis
- Unlimited effects control with freely assignable onboard footswitches and expression pedal with toe switch
- Connect up to two footswitches or an expression pedal for expanded control
- Send/return loop for external pedals or four-cable method
- Control jack for remote channel switching on your amplifier
- MIDI I/O jacks and multi-channel computer recording via USB
- Edit sounds from your computer with BOSS Tone Studio for macOS and Windows
- Download and share Livesets at BOSS Tone Exchange
- Optional Bluetooth® Audio MIDI Dual Adaptor allows you to edit sounds and stream audio from an iOS or Android mobile device
-
BOSS KATANA-212 MKII Guitar Amplifier
₹58,751.00Add to cartSpecifications:
- Rated Power Output:
- 100 W
- Nominal Input Level:
- INPUT: -10 dBu (1 M ohm)
- AUX IN: -10 dBu (20 k ohms)
- RETURN IN: -10 dBu (100 k ohm)
- Speakers:
- 30 cm (12 inches) x 2
Controls:
- Power Controls:
- POWER switch
- MASTER knob
- PRESENCE knob
- POWER CONTROL switch (STANDBY, 0.5 W, 50 W, 100 W)
- CAB RESONANCE switch (VINTAGE, MODERN, DEEP)
- Amplifier Controls:
- VARIATION button
- AMP TYPE knob (ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN)
- GAIN knob
- VOLUME knob
- Equalizer Controls:
- BASS knob
- MIDDLE knob
- TREBLE knob
- Multi Effect Controls:
- BOOSTER button
- MOD button
- FX button
- DELAY button
- REVERB button
- TAP button
- BOOSTER knob
- MOD knob
- FX knob
- DELAY knob
- REVERB knob
- Tone Setting Controls:
- CH1 button
- CH2 button
- CH3 button
- CH4 button
- PANEL button
- Stereo Expand:
- STEREO EXPAND switch
Indicators:
- VARIATION
- ACOUSTIC
- CLEAN
- CRUNCH
- LEAD
- BROWN
- BOOSTER
- MOD
- FX
- DELAY
- REVERB
- TAP
- CH1
- CH2
- CH3
- CH4
- PANEL
Connectors:
- Input/Output Connectors:
- INPUT jack: 1/4-inch phone type
- POWER AMP IN jack: 1/4-inch phone type
- LINE OUT jack: 1/4-inch phone type
- SEND jack: 1/4-inch phone type
- RETURN jack: 1/4-inch phone type
- REC OUT/PHONES jack: Stereo 1/4-inch phone type
- EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
- GA-FC jack: 1/4-inch TRS phone type
- AUX IN jack: Stereo miniature phone type
- USB port: USB B type
- AC IN jack
Power:
- Power Consumption: 77 W
Accessories:
- Included:
- Owner’s manual
- Power cord
- GA-FC sticker
- Options (Sold Separately):
- Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
- Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
- GA FOOT CONTROLLER (GA-FC, GA-FC EX)
- Amplifier Stand: BAS-1
Size and Weight:
- Dimensions:
- Width: 670 mm (26-7/16 inches)
- Depth: 248 mm (9-13/16 inches)
- Height: 484 mm (19-1/16 inches)
- Weight: 19.8 kg (43 lbs 11 oz)
- Rated Power Output:
-
BOSS Bass Multiple Effects ME-90B
₹42,934.00Add to cartAudio Specifications:
- Sampling Frequency: 48 kHz
- AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converters. - DA Conversion: 32 bits
- Processing: 32-bit floating point
- Effects: 93 Types
- Memories: 36 (User) + 36 (Preset)
- Phrase Loop: 38 sec. (MONO)
- Internal Tuning Detection Accuracy: ±0.1 cent
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- RETURN: -10 dBu
- Maximum Input Level:
- INPUT: +7 dBu
- RETURN: +7 dBu
- Input Impedance:
- INPUT: 1 M ohm
- RETURN: 1 M ohm
- Nominal Output Level:
- OUTPUT L/MONO, R: -10 dBu
- PHONES: -10 dBu
- SEND: -10 dBu
- BALANCED OUTPUT: -10 dBu
- Output Impedance:
- OUTPUT L/MONO, R: 1 k ohm
- PHONES: 44 ohms
- SEND: 1 k ohm
- BALANCED OUTPUT: 600 ohms
- Recommended Load Impedance:
- OUTPUT L/MONO, R: 10 k ohms or greater
- PHONES: 44 ohms or greater
- SEND: 10 k ohms or greater
- BALANCED OUTPUT: 600 ohms or greater
Controls and Display:
- Buttons:
- BANK▼/AMP/EQ switch, BANK▲/MOD switch, CTL/BLEND switch
- MEMORY/MANUAL switch, 1/COMP switch, 2/FILTER switch
- 3/DRV/SYN switch, 4/DLY/REV switch, PEDAL FX switch
- GND LIFT switch, AMP/LINE switch, POWER switch
- EXIT button, WRITE button, CTL button, EDIT button
- Knobs:
- PREAMP TYPE knob, BASS knob, MIDDLE knob, TREBLE knob, GAIN knob, LEVEL knob
- MOD TYPE knob, TYPE knob, RATE/TIME knob, DEPTH/DUTY/FB knob, E.LEV/RESO knob, BLEND knob
- COMP/FX1 TYPE knob, SUSTAIN/LOW/-1OCT knob, ATTACK/HIGH/-2OCT knob, LEVEL/DIRECT knob
- FILTER/FX2 TYPE knob, SENS/RATE/KEY knob, TONE/DEPTH/HRM knob, PEAK/LEVEL/RESO knob
- DRIVE/SYNTH TYPE knob, DRIVE knob, TONE knob, LEVEL knob
- DLY/REV TYPE knob, TIME knob, FEEDBACK/TONE knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob
- Pedal:
- PEDAL FX pedal
- Display:
- 7 segments, 2 characters (LED)
- Tuning guides (LED)
Connectors:
- Input/Output Connectors:
- INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
- BALANCED OUTPUT jack: XLR type
- PHONES jack: Stereo miniature phone type
- Control and Expansion:
- USB COMPUTER port: USB Type-C®
- Bluetooth® ADAPTOR connector: Dedicated connector
- DC IN jack
Power and Size:
- Power Supply:
- Alkaline battery (AA, LR6) x 4 or AC adaptor
- Current Draw: 195 mA
- Expected Battery Life Under Continuous Use:
- Alkaline battery: Approximately 6 hours
This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
- Alkaline battery: Approximately 6 hours
- Size:
- Width: 443 mm (17-1/2 inches)
- Depth: 220 mm (8-11/16 inches)
- Height: 67 mm (2-11/16 inches)
- Maximum Height: 93 mm (3-11/16 inches)
- Weight: 2.9 kg (6 lb 7 oz)
Accessories and Options (Sold Separately):
- Included Accessories:
- STARTUP GUIDE
- Alkaline battery (AA, LR6) x 4
- Leaflet “USING THE UNIT SAFELY”
- Options:
- AC adaptor: PSA-S series
- Bluetooth® Audio MIDI Dual Adaptor: BT-DUAL
- Carry Bag: CB-ME80, CB-BU10
Reviews
There are no reviews yet.