Sonic Sweetener
The vintage BOSS CE-1 Chorus Ensemble and RE-201 Space Echo are legendary for their inspiring and influential effect sounds. But they’re also loved for their variable analog preamp circuitry, which instantly infuses any guitar tone with character, body, and richness. With the BP-1W, you can now access these two classic preamp tones in a premium Waza Craft pedal, along with a natural, clear voice that functions as a standard clean boost.
Features
- Waza Craft innovation for a premium analog tone experience
- Premium booster and preamp pedal with analog circuitry derived from legendary BOSS and Roland effects
- Versatile design with three selectable modes
- CE mode reproduces the bright, bell-like preamp sound of the BOSS CE-1 Chorus Ensemble
- RE mode reproduces the fat, warm preamp sound of the Roland RE-201 Space Echo
- NAT mode provides a natural clean boost with minimal sound coloration
- Gain knob controls the amount of saturation introduced into the signal
- Level knob for controlling the overall volume and driving the inputs of amps and other pedals
- Selectable standard or vintage input buffer with different tone and response characteristics
- Made in Japan
- BOSS five-year warranty
Magical Enhancement
For generations, savvy guitarists have relied on key pieces of analog gear to enhance their core tone. Though discontinued over 30 years ago, the CE-1 and RE-201 remain widely used by many players for their characterful preamps as much as their famous analog effect sounds. These “secret weapons“ make the sound richer, fuller, and more satisfying to play, even when their effect processing is bypassed. The BP-1W lets you integrate the magical tone-shaping properties of these legends into your own rig—without having to seek out rare and expensive vintage originals.
Versatile Analog Sound Shaping
The BP-1W is one of the most flexible boost pedals available, offering three unique operation modes in a single compact stomp. Along with CE and RE vintage modes, a third mode provides a pristine clean boost when you want to pump the volume without added color. The Gain knob allows you to dial in a range of saturation and drive tones unique to each mode, while the Level knob lets you balance the effect/bypass sound or push downstream pedal and amp inputs for further tonal enhancement.
Choose Your Tone Color
CE—This mode reproduces the CE-1 preamp tone, known for its bright, bell-like character and tight low-end response. Tweak the Gain knob to conjure an array of pleasing tones, from mild to aggressive.
RE—This mode reproduces the unique color and response of the RE-201 preamp circuitry. It adds fatness and warmth even at the lowest Gain settings, with increasing saturation as the knob is turned up. You can achieve powerful driven sounds with rich analog compression characteristics, providing foundational vintage color to feed pedals and amps.
NAT—Produces a punchy, natural voice with minimal coloration. The modern analog Waza Craft circuitry provides a wide boost range, delivering top performance for any standard clean boost application.
Two Premium Buffers
The BP-1W features high-quality buffer circuitry with two selectable types. Slide the rear panel switch to choose between the pure signal of a standard buffer or a vintage buffer with lower input impedance. The vintage type produces a warmer tone and a smooth dynamic response, with maximum benefits achieved by connecting a guitar with passive pickups directly to the BP-1W’s input. The standard buffer is always engaged for signal conditioning when the pedal is bypassed, regardless of the buffer switch setting.
Waza Craft: The Art of Superior Tone
Since the beginning, the engineers at BOSS have been committed to achieving the finest guitar tones using any technology necessary, from old-school analog circuits to high-tech DSP. This enthusiastic spirit continues with the Waza Craft series, bringing you exceptional tone and touch response through carefully selected analog components, refined circuitry, and meticulous attention to detail. In Japan, “Waza“ is the term for art and technique, and these special edition pedals proudly carry the Waza symbol to represent the pinnacle of BOSS design and craftsmanship.
You must be logged in to post a review.
Related products
-
Boss VE-20 Vocal Multi-Effects Processor with Harmony and Looper
Original price was: ₹37,705.00.₹33,000.00Current price is: ₹33,000.00.Add to cart- Specialized effects for vocalists, including Harmony, Double-Track, Dynamics, Reverb, Delay, and more
- Create the total of 3-part harmonies and layers
- Realtime pitch-correction tools
- Special FX, including Distortion, Radio and Strobe
- Phrase Looper with 38 seconds (mono) of recording time
- Phantom power for condenser microphones
- Runs on six AA-batteries or AC adaptor (PSA)
- Easy operation, road-tough BOSS construction
-
Boss RC-5 Loop Station Pedal
Original price was: ₹31,785.00.₹23,000.00Current price is: ₹23,000.00.Add to cartStandard Features
- Advanced BOSS looping features in a compact footprint
- Class-leading sound quality with 32-bit AD/DA and 32-bit floating-point processing
- Stereo looper engine with 13 hours of recording time
- LCD with multi-color backlight for viewing loop status and editing parameters
- Reverse function for infusing loops with interesting textures
- Seven different drum kits and 57 preset rhythms with A/B variations
- Support for expanded control via external footswitches, an expression pedal, or MIDI
- Full MIDI I/O provided with space-saving mini TRS jacks (BMIDI-5-35 adaptor cable available separately)
- Onboard storage for 99 phrase memories
- Back up and load WAV loops via USB
-
BOSS Bass Multiple Effects ME-90B
₹42,934.00Add to cartAudio Specifications:
- Sampling Frequency: 48 kHz
- AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converters. - DA Conversion: 32 bits
- Processing: 32-bit floating point
- Effects: 93 Types
- Memories: 36 (User) + 36 (Preset)
- Phrase Loop: 38 sec. (MONO)
- Internal Tuning Detection Accuracy: ±0.1 cent
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- RETURN: -10 dBu
- Maximum Input Level:
- INPUT: +7 dBu
- RETURN: +7 dBu
- Input Impedance:
- INPUT: 1 M ohm
- RETURN: 1 M ohm
- Nominal Output Level:
- OUTPUT L/MONO, R: -10 dBu
- PHONES: -10 dBu
- SEND: -10 dBu
- BALANCED OUTPUT: -10 dBu
- Output Impedance:
- OUTPUT L/MONO, R: 1 k ohm
- PHONES: 44 ohms
- SEND: 1 k ohm
- BALANCED OUTPUT: 600 ohms
- Recommended Load Impedance:
- OUTPUT L/MONO, R: 10 k ohms or greater
- PHONES: 44 ohms or greater
- SEND: 10 k ohms or greater
- BALANCED OUTPUT: 600 ohms or greater
Controls and Display:
- Buttons:
- BANK▼/AMP/EQ switch, BANK▲/MOD switch, CTL/BLEND switch
- MEMORY/MANUAL switch, 1/COMP switch, 2/FILTER switch
- 3/DRV/SYN switch, 4/DLY/REV switch, PEDAL FX switch
- GND LIFT switch, AMP/LINE switch, POWER switch
- EXIT button, WRITE button, CTL button, EDIT button
- Knobs:
- PREAMP TYPE knob, BASS knob, MIDDLE knob, TREBLE knob, GAIN knob, LEVEL knob
- MOD TYPE knob, TYPE knob, RATE/TIME knob, DEPTH/DUTY/FB knob, E.LEV/RESO knob, BLEND knob
- COMP/FX1 TYPE knob, SUSTAIN/LOW/-1OCT knob, ATTACK/HIGH/-2OCT knob, LEVEL/DIRECT knob
- FILTER/FX2 TYPE knob, SENS/RATE/KEY knob, TONE/DEPTH/HRM knob, PEAK/LEVEL/RESO knob
- DRIVE/SYNTH TYPE knob, DRIVE knob, TONE knob, LEVEL knob
- DLY/REV TYPE knob, TIME knob, FEEDBACK/TONE knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob
- Pedal:
- PEDAL FX pedal
- Display:
- 7 segments, 2 characters (LED)
- Tuning guides (LED)
Connectors:
- Input/Output Connectors:
- INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
- BALANCED OUTPUT jack: XLR type
- PHONES jack: Stereo miniature phone type
- Control and Expansion:
- USB COMPUTER port: USB Type-C®
- Bluetooth® ADAPTOR connector: Dedicated connector
- DC IN jack
Power and Size:
- Power Supply:
- Alkaline battery (AA, LR6) x 4 or AC adaptor
- Current Draw: 195 mA
- Expected Battery Life Under Continuous Use:
- Alkaline battery: Approximately 6 hours
This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
- Alkaline battery: Approximately 6 hours
- Size:
- Width: 443 mm (17-1/2 inches)
- Depth: 220 mm (8-11/16 inches)
- Height: 67 mm (2-11/16 inches)
- Maximum Height: 93 mm (3-11/16 inches)
- Weight: 2.9 kg (6 lb 7 oz)
Accessories and Options (Sold Separately):
- Included Accessories:
- STARTUP GUIDE
- Alkaline battery (AA, LR6) x 4
- Leaflet “USING THE UNIT SAFELY”
- Options:
- AC adaptor: PSA-S series
- Bluetooth® Audio MIDI Dual Adaptor: BT-DUAL
- Carry Bag: CB-ME80, CB-BU10
-
BOSS Guitar Effects Processor GT-1000
₹131,409.00Add to cartAudio Specifications:
- Sampling Frequency: 96 kHz
- AD Conversion: 32 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters. - DA Conversion: 32 bits
- Effects: 185 types
- Patches: 250 (User) + 250 (Preset)
- Phrase Loop:
- 38 sec. (MONO)
- 19 sec. (STEREO)
- Tuner Internal Detection: +/- 0.1 cent
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- RETURN1: -10 dBu
- RETURN2: -10 dBu
- Maximum Input Level:
- INPUT: +18 dBu
- RETURN1: +8 dBu
- RETURN2: +8 dBu
- Input Impedance:
- INPUT: 1 M ohm
- RETURN1: 1 M ohm
- RETURN2: 1 M ohm
- Nominal Output Level:
- MAIN OUTPUT (L/MONO, R): -10 dBu
- SUB OUTPUT (L, R): +4 dBu
- PHONES: -10 dBu
- SEND1: -10 dBu
- SEND2: -10 dBu
- Output Impedance:
- MAIN OUTPUT (L/MONO, R): 1 k ohm
- SUB OUTPUT (L, R): 600 ohms
- PHONES: 20 ohms
- SEND1: 1 k ohm
- SEND2: 1 k ohm
- Recommended Load Impedance:
- MAIN OUTPUT (L/MONO, R): 10 k ohms or greater
- SUB OUTPUT (L, R): 600 ohms or greater
- PHONES: 44 ohms or greater
- SEND1: 10 k ohms or greater
- SEND2: 10 k ohms or greater
Controls and Display:
- Buttons:
- DOWN switch, UP switch
- CTL1–3 switches, 1–5 switches, POWER switch
- EFFECT button, MENU button, EXIT button, WRITE button, PAGE button
- Knobs:
- 1–6 knobs, OUTPUT LEVEL knob
- Expression Pedal: Supported (see options)
- Display:
- Graphic LCD (512 x 160 dots, backlit LCD)
Connectors:
- Input/Output Connectors:
- INPUT jack, MAIN OUTPUT (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type
- SUB OUTPUT (L, R) connectors: XLR type
- PHONES jack: Stereo 1/4-inch phone type
- Control and Expansion:
- CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type
- USB Port: USB B type (for computer connection)
- Power Input: DC IN jack
- MIDI: IN, OUT connectors
Power and Size:
- Power Supply: AC adaptor (PSB-1U + AC Cord Set)
- Current Draw: 1.2 A
- Power Consumption in OFF Mode: 0.0 W
- Size:
- Width: 462 mm (18-3/16 inches)
- Depth: 248 mm (9-13/16 inches)
- Height: 70 mm (2-13/16 inches)
- Maximum height: 95 mm (3-3/4 inches)
- Weight: 3.6 kg (7 lbs 15 oz)
Accessories and Options (Sold Separately):
- Footswitches: FS-5U, FS-5L, FS-6, FS-7
- Expression Pedals: EV-30, FV-500L, FV-500H, Roland EV-5
- AC Adaptor: PSB-1U
Additional Notes:
- AC Adaptor Region Compatibility:
- When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be used, and the voltage supplied there.
PSB-120/PSB-120TW/PSB-230EU/PSB-230UK/PSB-240A
- When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be used, and the voltage supplied there.
Product Showcase
Reviews
There are no reviews yet.