Product Showcase
Austrian Audio OD505 WL1 Wireless Active dynamic Microphone Capsule
Original price was: ₹33,360.00.₹31,692.00Current price is: ₹31,692.00.
- Microphone Type: Dynamic Capsule
- Compatibility: Shure, Sony, Lectrosonics
- Polar Pattern: Supercardioid
- Max SPL: 150 dB SPL
- Frequency Range: 35 Hz – 16 kHz
Available on backorder
Austrian Audio’s OD505 WL1 Overview
Bring the open, consistent, and authentic sound of the OD505 active-dynamic wired handheld voice microphone to your wireless system with the Austrian Audio OD505 WL1. This mic capsule works with Shure, Sony, and Lectrosonics handheld transmitters. The OD505 WL1 is skilfully calibrated to highlight the qualities of lead and background vocals with little adjustments from FOH engineers, technicians, or artists.
This super cardioid, active-dynamic capsule employs the company’s Open Acoustic technology to ensure that your voice stands out from the crowd. The proximity effect is optimized to keep your voice’s tonally open character consistent at different distances from the mic and with variations in mic technique. Each OD505 WL1 capsule is hand-built in Vienna and then measured and adjusted in the anechoic room.
Open Acoustic Technology over Wireless
- The sound of the OD505 active-dynamic wired handheld speech microphone.
- Fits on Shure, Sony, and Lectrosonics portable wireless transmitters.
- The dual-capsule, active-dynamic architecture provides consistent sound.
- Accurately constructed super-cardioid polar pattern throughout a large frequency range.
- Improved performance by limiting feedback.
- Excellent control over proximity effect, with no change in sound or feedback while grasping the microphone head grille.
- The specially built 3D Pop Noise Diffuser lessens the impact of plosives.
- Durable metal housing with mesh grille.
Austrian Audio OD505 WL1 Wireless Microphone Capsule Features:
- Wireless version of the OD505 handheld microphone
- For Shure, Sony, and Lectrosonics transmitters.
- Supercardioid Polar Pattern.
- Active Dynamic Capsule
- 3D Pop Noise Diffuser
- Metal Housing with Mesh Grille
You must be logged in to post a review.
Related products
-
Shure SM7B Cardioid Vocal Dynamic Studio Microphone
Read moreShure SM7B Cardioid Vocal Dynamic Studio Microphone
Ooberpad announces the availability of Shure SM7B Cardioid Vocal Dynamic Studio Microphone.
-
Lauten Audio LA-220 V2
Original price was: ₹50,765.00.₹48,000.00Current price is: ₹48,000.00.Add to cartLA-220 CLASSIC OR CLEAN FET MIC SOUND AT THE FLIP OF A SWITCH VOCALS // DRUMS // ACOUSTIC GUITAR // ELECTRIC GUITAR STUDIO SOUND IN REAL-WORLD SPACES The LA-220 is a two-tone FET microphone that allows you to choose between the warmth of a classic microphone and the clarity of a modern microphone at the …
-
Sontronics MERCURY
Original price was: ₹220,355.00.₹215,000.00Current price is: ₹215,000.00.Add to cart- Polar pattern: Sweepable from omni to figure-of-eight & everything in between
- Frequency response: 20Hz – 20kHz
- Pad: 0, -10dB
- Filter: Linear, 75Hz
- Sensitivity: 18mV/Pa -33dB ±1.5dB (0dB = 1V/Pa @ 1,000Hz)
- Impedance: ≤200 Ohms
- Equivalent noise level: <12dB (A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 125dB
- Power: 115/230V *phantom power NOT required*
- Connector: 8-pin connector (mic),
- 3-pin XLR-M (power supply)
- Dimensions: 250 x 90 x 80mm
- Weight: 2317g (mic only)
- Comes with: wooden box (for Mercury mic), shockmount, cables, power supply, aluminium flightcase
-
Sontronics Drum Pack Plus
Original price was: ₹116,240.00.₹113,000.00Current price is: ₹113,000.00.Add to cart-
Polar pattern (all mics): Cardioid
-
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
-
Filter (STC-10 only): Linear/75Hz
-
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
-
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
-
8mV/Pa -42dB ±2dB (DM-1S & 1T),
-
11mV/Pa -39dB ±2dB (STC-10)
-
Impedance (all mics): ≤200 Ohms
-
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
-
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
-
Power sources (all mics): 48V ±4V phantom power required
-
Connector (all mics): 3-pin XLR
-
Dimensions: 144 x 72 x 72mm (DM-1B),
-
91 x 22 x 22mm (DM-1S & 1T),
-
150 x 21 x 21mm (STC-10)
-
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
-
Reviews
There are no reviews yet.