Category: MONITORS

Showing 61–72 of 108 results

wishlist

KRK ROKIT 8 G4 8″ Powered Near-Field Studio Monitor
ROKIT 8 G4

8″ Near-Field Studio Monitor

Frequency Response
36Hz – 40KHz

Max SPL 111 dB

Power Output 203 Watts

Input Impedance
5.12KΩ Balanced

Balanced TRS/XLR Combo Jacks

Height 15.75″ / 400 mm

Width 10.47″ / 266 mm

Depth 12.17″ / 309 mm

Weight 22.6 lb / 10.25 kg
Read more
wishlist

KRK V4 Series 4 Powered Reference Monitors
V4 Features

1″ KRK custom designed Kevlar® tweeter

4″ KRK custom designed Woven Kevlar® woofer

Optimized front ported bass reflex enclosure design

Bi-amped Class-D amplification

Acoustic and desk loading condition correction Low Frequency EQ’s

Mid and High Frequency EQ’s

49 different DSP driven EQ presets give you superior control for room/desk correction as well as personal taste

Precise input level attenuation switch

Standby, ground lift, input sensitivity, and logo LED selectors

Optional protective grille included for mobile broadcast applications

Friction lock, Neutrik combo (XLR and TRS) connector

Robust EVA foam pad for non-skid and acoustic isolation

Universal threaded mounting bracket points
Read more
wishlist

KRK V6 Series 4 Powered Reference Monitors
V6 Features

1″ KRK custom designed Kevlar® tweeter

6.5″ KRK custom designed Woven Kevlar® woofer

Optimized front ported bass reflex enclosure design

Bi-amped Class-D amplification

Acoustic and desk loading condition correction Low Frequency EQ’s

Mid and High Frequency EQ’s

49 different DSP driven EQ presets give you superior control for room/desk correction as well as personal taste

Precise input level attenuation switch

Standby, ground lift, input sensitivity, and logo LED selectors

Optional protective grille included for mobile broadcast applications

Friction lock, Neutrik combo (XLR and TRS) connector

Robust EVA foam pad for non-skid and acoustic isolation

Universal threaded mounting bracket points
Read more
wishlist

KRK V8 Series 4 Powered Reference Monitors
V8 Features

1″ KRK custom designed Kevlar® tweeter

8″ KRK custom designed Woven Kevlar® woofer

Optimized front ported bass reflex enclosure design

Bi-amped Class-D amplification

Acoustic and desk loading condition correction Low Frequency EQ’s

Mid and High Frequency EQ’s

49 different DSP driven EQ presets give you superior control for room/desk correction as well as personal taste

Precise input level attenuation switch

Standby, ground lift, input sensitivity, and logo LED selectors

Optional protective grille included for mobile broadcast applications

Friction lock, Neutrik combo (XLR and TRS) connector

Robust EVA foam pad for non-skid and acoustic isolation

Universal threaded mounting bracket points
Read more
Sale!

wishlist

KRK VXT8 POWERED STUDIO MONITOR (PAIR)
Original price was: ₹121,398.00.Current price is: ₹85,000.00.

VXT Series monitors are hallmarked by defined low end, articulate midrange and precise highs, delivering clarity and accuracy on par with many world-class speakers costing more. In addition, the VXT 8 studio monitor features several key design elements that have made KRK sounds a “studio standard”.

Add to cart
Sale!

wishlist

M-AUDIO BX3 BT Bluetooth® Monitors (PAIR)
Original price was: ₹15,000.00.Current price is: ₹13,499.00.
Key Features

Bluetooth® Connectivity – Easily pair with any Bluetooth-enabled device for wireless streaming

Black Kevlar® low frequency drivers; 1″ natural silk dome tweeters

New computer-optimized tweeter waveguide for precise imaging

High-EQ and Low-EQ controls for dialing in the perfect sound

Enhanced rear ports for extended low-frequency response

Left/right Active Speaker Position switch for configuring which side has volume control

Bluetooth, 1/4″, 1/8″, and RCA inputs for connecting to virtually any audio source

Front 1/8″ AUX input for quick connection of smartphones or other audio sources

Acoustically-inert MDF cabinet with bass reflex design for deep, rich sound

Includes 1/8″ speaker interconnect cable, 1/8″ to 1/8″ cable and 1/8″ to RCA cable
Add to cart
Sale!

wishlist

M-AUDIO BX3(PAIR)
Original price was: ₹13,800.00.Current price is: ₹12,499.00.
Key Features

3.5” Black Kevlar® low frequency drivers; 1” natural silk dome tweeters

New computer-optimized tweeter waveguide for precise imaging

High-EQ and Low-EQ controls for dialing in the perfect sound

Enhanced rear ports for extended low-frequency response

Left/Right Active Speaker Position Switch for configuring which side has volume control

1/4”, 1/8”, and RCA inputs for connecting to virtually any audio source

Front 1/8” AUX input for quick connection of smartphones or other audio sources

Acoustically-inert MDF cabinet with bass reflex design for deep, rich sound

Includes 1/8” speaker interconnect cable, 1/8” to 1/8” cable, 1/8” to RCA cable and Foam Feet
Add to cart
Sale!

wishlist

M-AUDIO BX4(PAIR)
Original price was: ₹17,850.00.Current price is: ₹15,999.00.
Key Features

4.5” Black Kevlar® low frequency drivers; 1” natural silk dome tweeters

New computer-optimized tweeter waveguide for precise imaging

High-EQ and Low-EQ controls for dialing in the perfect sound

Enhanced rear ports for extended low-frequency response

Left/right Active Speaker Position Switch for configuring which side has volume control

1/4”, 1/8”, and RCA inputs for connecting to virtually any audio source

Front 1/8” AUX input for quick connection of smartphones or other audio sources

Acoustically-inert MDF cabinet with bass reflex design for deep, rich sound

Includes 1/8” speaker interconnect cable, 1/8” to 1/8” cable, 1/8” to RCA cable and Foam Feet
Add to cart
Sale!

wishlist

M-AUDIO BX5 D3 (SINGLE)
Original price was: ₹15,200.00.Current price is: ₹13,499.00.
Features

Bi-amplified design with 100 watts (60 LF, 40 HF) for powerful, accurate sound

5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround

1” natural silk dome tweeter delivers superb transient details

New computer-optimized tweeter waveguide for precise imaging

Acoustic Space Control to fine-tune low-end response to your room

Optimized rear port for extended low-frequency response

XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers DJ gear, and more

Volume control enables you to dial in the perfect monitor playback level

Ultra-wide range 52-35kHz frequency response covers full musical spectrum

Front panel LED shines brightly when speaker is positioned at ideal monitor angle

Specifications

Type: 2-way near-field studio reference monitors

Low Freq. Driver: 5 inch (127mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded

High Freq. Driver: 1 inch (25mm) magnetically shielded natural silk dome

Frequency Response: 52Hz – 35kHz

Crossover Frequency: 2.0kHz

Low Freq. Amplifier Power: 65W

High Freq. Amplifier Power: 55W

Maximum Peak SPLï¼š105dB

Input Sensitivity: 85mV pink noise input produces 96dBA output SPL at 1

Input Connectors:

1x XLR balanced input connector

1x TRS balanced/unbalanced input connector

Input Impedance: 10kΩ balanced, 20kΩ unbalanced

Polarity: Positive signal at + input produce outward LF cone displacement

Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse

Power Requirements: Factory-programmed for 115V ~50/60Hz, 230V ~50/60Hz, or 100V ~50/60Hz

Cabinet: Vinyl-laminated high-acoustic-efficiency MDF

Dimension: (height x width x depth):

10in. x 6.9in. x 7.8in

254mm x 176mm x 197mm

Weight (without packing): 12.3 lbs., 5.6kg
Add to cart
Sale!

wishlist

M-AUDIO BX8 D3 (SINGLE)
Original price was: ₹22,000.00.Current price is: ₹19,499.00.
Features

Bi-amplified design with 150 watts (80 LF, 70 HF) for powerful, accurate sound

8” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround

1.25” natural silk dome tweeter delivers superb transient details

Computer-optimized tweeter waveguide for precise imaging

Acoustic Space Control to fine-tune low-end response to your room

Optimized rear port for extended low-frequency response

XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers DJ gear, and more

Volume control enables you to dial in the perfect monitor playback level

Wide range 37-22kHz frequency response covers full musical spectrum Front panel LED shines brightly when speaker is positioned at ideal monitor angle

Specifications

Type: 2-way near-field studio reference monitors

Low Freq. Driver: 8 inch (203 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround, magnetically shielded

High Freq. Driver: 1.25 inch (32mm) magnetically shielded natural silk dome

Frequency Response: 37Hz – 22kHz

Crossover Frequency: 1.9kHz

Low Freq. Amplifier: Power: 85W

High Freq. Amplifier: Power: 75W

Maximum Peak SPL: 110dB

Input Sensitivity: 85mV pink noise input produces 96dBA output SPL at 1 meter with volume control at maximum

Input Connectors:

1x XLR balanced input connector

1x TRS balanced/unbalanced input connector

Input Impedance: 10kΩ balanced, 20kΩ unbalanced

Polarity: Positive signal at + input produce outward LF cone displacement

Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse

Power Requirements: Factory-programmed for 115V ~50/60Hz, 230V ~50/60Hz, or 100V ~50/60Hz

Cabinet: Vinyl-laminated high-acoustic-efficiency MDF

Dimension: (height x width x depth):

15in. x 10in. x 12in.

384mm x 250mm x 302mm

Weight (without packing): 26.4lbs., 11kg
Add to cart
Sale!

wishlist

M-Audio M3-6 3-Way Active Studio Monitor Speaker (PAIR)
Original price was: ₹64,000.00.Current price is: ₹48,000.00.

You need a three-way monitor.

We know what you’re thinking: Why do you make a three-way monitor? Why do I need one?

A well-designed three-way monitor using high quality drive units exhibits really outstanding performance:

1. It plays louder. A midrange driver is typically four to five inches in diameter, meaning that the midrange driver can “move a lot more air” through the mid frequencies than a diminutive 1” tweeter. For the same wattage input, a five-inch midrange driver literally takes a “bigger bite” out of the air, which translates into more sound for the same input power.

2. It handles great amounts of power and is extremely reliable. Having a dedicated midrange driver means that the tweeter—which is the most fragile of speaker elements—does not have to struggle trying to reach down to the midrange frequencies, as tweeters must do in two-way systems. The crossover frequency specs tell the story: In a properly designed three-way speaker, the tweeter doesn’t have to “enter the game” until around 4,000 Hz—well up into the treble region, which is not a frequency area that requires the current-heavy drive signals that can burn out a delicate tweeter. In contrast, the tweeter in a two-way speaker crosses over about a full octave lower—around 2,000 Hz—which puts it in considerably greater thermal and mechanical danger. The lower a tweeter crosses over, the more likely it is that you’ll suffer tweeter failure from burnout or irreparable voice coil displacement from over-excursion.

3. The sound coverage (sometimes called “dispersion” or “radiation pattern”) is extremely wide and consistent. This is critically important in a studio monitor—you have to have wide, even, consistent sound coverage so you can hear your mixes with clarity and detail, even if you’re standing a little off to the side (“off axis”) of the speaker. The M3-6 uses its drivers only in the frequency range where it has very wide-angle dispersion.

Best of all, the space-saving M3-6 Studio Reference Monitor delivers its truly spectacular three-way sound from the same compact cabinet size as a standard two-way monitor.

In-Line MF/HF Design

In the sophisticated design of the M3-6, the midrange and tweeter are mounted in-line with each other (the tweeter is actually mounted at the apex of the midrange) at precisely the same point in space. Doing so means the sound of the two drivers integrates perfectly, without the “time/arrival distortion” of conventionally-spaced drive units. Instead, with the M-Audio M3-6, the all-important midrange and treble information reaches your ears at precisely the same time, delivering the ultimate in detail and clarity.

No speaker with conventionally-mounted drivers can equal the M3-6’s incredibly natural, three-dimensional sound field. Your mixes sound real, and you can make very confident, precise adjustments to your recordings. That’s what a great monitor is supposed to do for you.

Superb Drive Units

Kevlar® is an ideal driver diaphragm material: Incredibly strong, stiff and light (it’s used in military body armor!). We use it in both the M3-6’s 6” woofer and the 5” midrange, giving those units an incredibly fast transient attack, excellent sensitivity and great resistance to cone flexing and resonant breakup at high power levels. Loud, strong and fast—perfect monitor characteristics.

The 1” woven silk dome tweeter uses Ferro-fluid voice coil cooling for added reliability at studio power levels and this tweeter imparts virtually no harshness or “listening fatigue,” as is often the case with metal dome tweeters. This is extremely important to the recording engineer who spends hours in the studio, listening to his mixes, relying on his unfatigued hearing to make subtle adjustments.

Additionally, the tweeter is mounted in an integrated waveguide, which precisely focuses and directs the treble energy into the listening field, ensuring a solid and stable sonic image and minimizing the random acoustic “scatter” that would distract from properly evaluating the recording’s playback.

Finally, we’ve paid close attention to the cabinet as well. The attractive real wood-veneered baffle is chamfered at the top edges to aid in dispersion and reduce audibly-destructive edge diffraction. We’ve also optimized the cabinet’s internal bracing to ensure that the drivers have a solid, vibration-free platform from which to launch their sound, and we’ve used computer calculations to determine the port’s characteristics for the best possible bass response.

Three (Amplifiers) Is Key

Three individual internal amplifiers provide power to each of the three speaker elements. These amplifiers are specifically tailored to the drivers they are matched with, for smooth operation and system synergy that is virtually impossible to equal using outboard amplifiers and passive speakers. A total of 160 watts of Class AB amplification empowers the M3-6 with ample headroom for even the loudest mixes. The carefully-selected crossover points divide the frequency spectrum into very precise bands so that each individual driver only handles the exact frequency range where it is most accurate.

The powerful three-band (LF, MF, HF) EQ gives you the flexibility to shape the sound to match your listening environment. The switchable low-cut filter is perfect for tailoring the M3-6’s bass response for use with a subwoofer, like M-Audio’s BX Subwoofer. Pinhole-mounted blue LEDs provide an easy-to-use visual aid for perfect speaker placement.

The result of all these innovations and thoughtful design touches is an outstanding studio monitor speaker able to perform at a far higher level than the typical monitor—even in the most critical listening environment. Your mix is only as good as your monitor. Don’t settle for less than the best.

Add to cart
Sale!

wishlist

Mackie CR3-X 3″ Multimedia Powered Monitors (Pair)
Original price was: ₹15,104.00.Current price is: ₹9,500.00.
50 watts of CR Series sound for home studios, content creators, gaming and listening

Sleek design with a brushed metal front plate to match any desk

3” polypropylene woofer and custom-tuned ports for deep bass extension

.75” silk tweeter and specially designed waveguide for unmatched clarity

Speaker placement switch—choose which side of your desk gets the volume knob

Flexible input options that include 1/4”, 1/8” and RCA

Front-facing headphone output jack
Add to cart

No items found.