Category: BOSS

Showing 49–60 of 88 results

Boss KATANA-MINI Guitar Amplifier

SPECIFICATION

Type	Solid State
Number of Channels	1
Total Power	7W
Speaker Size	1 x 4″ speaker
Effects	Delay
EQ	3-band EQ
Inputs	1 x 1/4″ (instrument), 1 x 1/8″ (aux in)
Outputs	1 x 1/8″ (headphones/rec out)
Headphones	Yes
Power Source	9V DC 350mA power supply (sold separately) / 6 x AA batteries
Height	7.12″
Width	9.06″
Depth	4.6″
Weight	2.6 lbs.

Add to cart

QuickView

wishlist

Wishlist

Compare
BOSS LMB-3 Bass Limiter/Enhancer
₹11,655.00
Tuning and Signal Features:

Nominal Input Level: -20 dBu, which is typical for guitar-level input.

Input Impedance: 1 M ohm, suitable for high-impedance instruments like electric guitars and basses.

Nominal Output Level: -20 dBu.

Output Impedance: 1 k ohm, which is standard for pedals to be connected to amplifiers or other audio gear.

Recommended Load Impedance: 10 k ohms or greater, ensuring compatibility with most amplifiers and other equipment.

Bypass:

Buffered Bypass: Ensures that the signal remains intact when the pedal is turned off, preserving sound quality.

Controls:

THSHD Knob: Likely controls the threshold of the compressor, setting the level at which compression begins to take effect.

RATIO Knob: Adjusts the compression ratio, controlling how much compression is applied once the threshold is surpassed.

ENHANCE Knob: This could adjust the tonal character or presence of the signal, often used to add brightness or “shine.”

LEVEL Knob: Sets the output level of the compressed signal, allowing for volume adjustments after compression is applied.

Pedal Switch: Used to engage or bypass the effect.

Power Supply:

Battery Options:

Carbon-zinc 9V battery (6F22).

Alkaline 9V battery (6LR61).

AC Adaptor: PSA series (sold separately).

Current Draw:

25 mA, which is relatively low, meaning the pedal consumes little power.

Expected Battery Life:

Carbon-zinc: Approx. 5 hours of continuous use.

Alkaline: Approx. 10.5 hours of continuous use.

Indicators:

CHECK Indicator: Shows when the battery is low or needs to be replaced. It can also be used to verify the pedal’s status.

Connectors:

INPUT Jack: 1/4-inch phone type for connecting instruments or line-level sources.

OUTPUT Jack: 1/4-inch phone type for sending the processed signal to an amplifier or next device.

DC IN Jack: For connecting an external power source (AC Adaptor, PSA series).

Accessories:

Included: Leaflet with safety and usage instructions, 9V Carbon-zinc battery (6F22).

Optional: AC Adaptor (PSA series, sold separately).

Size and Weight:

Width: 73 mm (2-7/8 inches).

Depth: 129 mm (5-1/8 inches).

Height: 59 mm (2-3/8 inches).

Weight (including battery): 380 g (14 oz).
Add to cart
QuickView

wishlist

Wishlist

Compare
BOSS MD-2 Mega Distortion
₹10,654.00
Input/Output Specifications:

Nominal Input Level: -20 dBu (standard line-level signal).

Input Impedance: 1 M ohm (ideal for high-impedance sources like electric guitars).

Nominal Output Level: -20 dBu.

Output Impedance: 1 k ohm (typical for line-level outputs).

Recommended Load Impedance: 10 k ohms or greater (for proper signal transfer).

Bypass:

Buffered Bypass: Ensures the signal remains strong and clear when the effect is bypassed, preventing signal degradation.

Controls:

GAIN BOOST Knob: Likely adds extra gain or distortion to the signal, enhancing the intensity of the effect.

DIST Knob: Adjusts the amount of distortion or overdrive applied to the signal.

TONE/BOTTOM Knob: Shifts the tonal character, probably adjusting treble or bass frequencies, allowing you to shape the sound to your preference.

LEVEL Knob: Controls the output volume of the effect.

Indicator:

CHECK Indicator: Lights up when the battery is running low, alerting the user to check or replace the battery.

Connectors:

INPUT Jack: 1/4-inch phone type (for connecting your instrument).

OUTPUT Jack: 1/4-inch phone type (to send the processed signal to an amplifier or the next device in the signal chain).

DC IN Jack: For connecting an external AC power adapter (PSA series, sold separately).

Power Supply:

Battery:

Carbon-zinc 9V battery (6F22) or

Alkaline 9V battery (6LR61).

AC Adaptor: PSA series (sold separately).

Current Draw: 20 mA (very low current consumption, ideal for portable setups).

Expected Battery Life:

Carbon-zinc: Approx. 16 hours.

Alkaline: Approx. 30 hours (actual battery life may vary depending on usage).

Accessories:

Included: Leaflet with safety and usage information, 9V Carbon-zinc battery (6F22).

Optional: AC Adapter (PSA series, sold separately).

Size and Weight:

Width: 73 mm (2-7/8 inches).

Depth: 129 mm (5-1/8 inches).

Height: 59 mm (2-3/8 inches).

Weight (with battery): 395 g (14 oz).
Add to cart
QuickView

wishlist

Wishlist

Compare
BOSS ML-2 Metal Core
₹11,395.00
Specifications

Nominal Input Level: -20 dBu

Input Impedance: 1 M ohm

Nominal Output Level: -20 dBu

Output Impedance: 1 k ohm

Recommended Load Impedance: 10 k ohms or greater

Bypass: Buffered bypass

Controls

Pedal Switch

LEVEL Knob

LOW Knob

HIGH Knob

DIST Knob

Indicator

CHECK Indicator: Serves as the battery check indicator.

Connectors

INPUT Jack: 1/4-inch phone type

OUTPUT Jack: 1/4-inch phone type

AC Adaptor Jack: DC 9V

Power Supply

Battery: Alkaline battery (9V, 6LR61)

AC Adaptor: PSA series (sold separately)

Current Draw

60 mA

Expected Battery Life under Continuous Use

Alkaline: Approx. 5.5 hours
(These figures may vary depending on actual conditions of use.)

Accessories

Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)

Battery: Alkaline battery (9V, 6LR61)

Options (Sold Separately)

AC Adaptor: PSA series

Size and Weight

Width: 73 mm (2-7/8 inches)

Depth: 129 mm (5-1/8 inches)

Height: 59 mm (2-3/8 inches)

Weight (Including Battery): 420 g (15 oz)
Add to cart
QuickView

wishlist

Wishlist

Compare
BOSS MO-2 Multi Overtone
₹14,939.00
Input/Output Specifications:

Nominal Input Level: -20 dBu (a standard line-level signal)

Input Impedance: 1 M ohm (suitable for high-impedance sources like guitars)

Nominal Output Level: -20 dBu

Output Impedance: 1 k ohm (affects the interaction with connected equipment)

Recommended Load Impedance: 10 k ohms or greater (ensures proper signal transfer)

Controls:

Pedal Switch: Engages or disengages the effect.

BALANCE Knob: Likely controls the balance between the wet (processed) and dry (unprocessed) signals.

TONE Knob: Adjusts the overall tone (high/low frequencies) of the effect.

DETUNE Knob: Likely adjusts the pitch or detuning effect, creating modulation or chorus effects.

MODE Knob: Changes the effect’s mode or type, altering how the effect behaves.

Indicators:

CHECK Indicator: Serves as both an operational indicator and battery check light.

Connectors:

INPUT Jack: For the instrument or signal source (likely 1/4-inch phone jack).

OUTPUT-A (MONO) Jack: Main output for mono or mixed output.

OUTPUT-B Jack: Additional output (for stereo or alternate routing).

AC Adaptor Jack (DC 9V): For connecting an external power supply (sold separately).

Power Supply:

Battery: Alkaline 9V battery (6LR61).

AC Adaptor: PSA series (sold separately).

Current Draw: 60 mA.

Expected Battery Life: Approximately 3 hours (can vary based on usage).

Accessories:

Included: Safety information leaflet, Alkaline 9V battery (6LR61).

Optional: AC Adapter (PSA series, sold separately).

Dimensions and Weight:

Width: 73 mm (2-7/8 inches).

Depth: 129 mm (5-1/8 inches).

Height: 59 mm (2-3/8 inches).

Weight (with battery): 415 g (15 oz)
Add to cart
QuickView

wishlist

Wishlist

Compare
BOSS MT-2 Metal Zone
₹11,595.00
Specifications

Nominal Input Level: -20 dBu

Input Impedance: 1 M ohm

Nominal Output Level: -20 dBu

Output Impedance: 1 k ohm

Recommended Load Impedance: 10 k ohms or greater

Bypass: Buffered bypass

Controls

DIST Knob

EQUALIZER MIDDLE/MID FREQ Knob

EQUALIZER HIGH/LOW Knob

LEVEL Knob

Pedal Switch

Indicator

CHECK Indicator: Used for indication of battery check.

Connectors

INPUT Jack: 1/4-inch phone type

OUTPUT Jack: 1/4-inch phone type

DC IN Jack

Power Supply

Battery: Carbon-zinc battery (9V, 6F22) or Alkaline battery (9V, 6LR61)

AC Adaptor: PSA series (sold separately)

Current Draw

30 mA

Expected Battery Life under Continuous Use

Carbon: Approx. 12.5 hours

Alkaline: Approx. 23.5 hours
(These figures may vary depending on actual conditions of use.)

Accessories

Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)

Battery: Carbon-zinc battery (9V, 6F22)

Options (Sold Separately)

AC Adaptor: PSA series

Size and Weight

Width: 73 mm (2-7/8 inches)

Depth: 129 mm (5-1/8 inches)

Height: 59 mm (2-3/8 inches)

Weight (Including Battery): 385 g (14 oz)
Add to cart
QuickView

wishlist

Wishlist

Compare
BOSS MT-2W Metal Zone
₹19,505.00
Signal Specifications:

Nominal Input Level: -20 dBu

Standard for guitar-level input signals.

Input Impedance: 1 M ohm

High impedance, suitable for guitars and other high-impedance instruments.

Nominal Output Level: -20 dBu

Standard output level of the signal.

Output Impedance: 1 k ohm

Compatible with most amplifiers and pedals.

Recommended Load Impedance: 10 k ohms or greater

Ensures optimal performance with a wide range of amplifiers and effects chains.

Bypass:

Buffered Bypass:

Ensures that the signal remains intact when the pedal is turned off, maintaining your guitar’s original tone.

Controls:

Pedal Switch:

Turns the pedal on or off.

Mode Switch:

Allows you to switch between different distortion modes.

DIST Knob:

Adjusts the amount of distortion in the signal.

EQUALIZER MIDDLE/MID FREQ Knob:

Controls the middle frequencies (midrange) to shape the sound and enhance or cut specific frequencies.

EQUALIZER HIGH/LOW Knob:

Adjusts the high and low frequency ranges for more tonal control.

LEVEL Knob:

Controls the output volume of the effect.

Power Supply:

Battery Options:

Alkaline 9V battery (6LR61).

Carbon-zinc 9V battery (6F22).

AC Adaptor:

PSA series (sold separately).

Current Draw:

35 mA — Low power consumption for extended use.

Expected Battery Life:

Alkaline: Approx. 18 hours of continuous use.

Carbon-zinc: Approx. 7 hours of continuous use.

Indicators:

CHECK Indicator:

Indicates when the battery is running low or when the pedal is engaged.

Connectors:

INPUT Jack:

1/4-inch phone type for connecting your instrument (guitar, bass, etc.).

OUTPUT Jack:

1/4-inch phone type for sending the processed signal to your amplifier or effects chain.

DC IN Jack:

For connecting an external power supply (PSA series AC adapter).

Accessories:

Included:

Leaflet with safety instructions and usage guidelines.

Alkaline 9V battery (6LR61).

Optional (sold separately):

AC Adaptor: PSA series.

Size and Weight:

Width: 73 mm (2-7/8 inches).

Depth: 129 mm (5-1/8 inches).

Height: 59 mm (2-3/8 inches).

Weight (including battery): 440 g (1 lb).
Add to cart
QuickView

wishlist

Wishlist

Compare
BOSS NS-2 Noise Suppressor
₹11,395.00
Input/Output Specifications:

Nominal Input Level: -20 dBu (standard line-level input).

Input Impedance: 1 M ohm (ideal for high-impedance sources like electric guitars).

Nominal Output Level: -20 dBu.

Output Impedance: 1 k ohm (standard for line-level outputs).

Recommended Load Impedance: 10 k ohms or greater (ensures proper interaction with other equipment).

Bypass:

Buffered Bypass: Keeps the signal intact when the effect is turned off, ensuring that the dry signal does not degrade.

Controls:

MODE Selector Switch: Selects between different processing modes (e.g., compression, limiting, or other dynamic control types).

DECAY Knob: Likely controls the decay time of the effect, affecting how quickly the processed signal fades or returns to the original level.

THRESHOLD Knob: Sets the level at which the effect (compression or limiting) is triggered. Signals above this threshold will be processed, while those below remain unaffected.

Pedal Switch: Engages or disengages the effect.

Indicators:

CHECK/MUTE Indicator: Used for both battery check and muting status indication.

REDUCTION Indicator: Indicates the amount of signal reduction (compression or limiting) being applied.

Connectors:

INPUT Jack: 1/4-inch phone type (for instrument or signal input).

OUTPUT Jack: 1/4-inch phone type (for sending the processed signal to an amplifier or next effect in the chain).

SEND Jack: 1/4-inch phone type (used in a send-return loop for connecting external devices).

RETURN Jack: 1/4-inch phone type (used to return the signal from an external device in a send-return loop).

DC IN Jack: For connecting an external AC power adapter (PSA series, sold separately).

9V DC OUT Jack: Provides 9V power to other devices in the signal chain.

Power Supply:

Battery:

Carbon-zinc 9V battery (6F22) or

Alkaline 9V battery (6LR61).

AC Adaptor: PSA series (sold separately).

Current Draw: 25 mA (low power consumption).

Expected Battery Life:

Carbon-zinc: Approx. 11 hours.

Alkaline: Approx. 24.5 hours (may vary depending on actual usage).

Accessories:

Included: Safety and information leaflets, 9V Carbon-zinc battery (6F22).

Optional: AC Adapter (PSA series), Parallel DC Cord (PCS-20A, sold separately).

Size and Weight:

Width: 73 mm (2-7/8 inches).

Depth: 129 mm (5-1/8 inches).

Height: 59 mm (2-3/8 inches).

Weight (with battery): 415 g (15 oz).
Add to cart
QuickView

wishlist

Wishlist

Compare
BOSS OD-1X Overdrive
₹18,564.00
Specifications

Nominal Input Level: -20 dBu

Input Impedance: 1 M ohm

Nominal Output Level: -20 dBu

Output Impedance: 1 k ohm

Recommended Load Impedance: 10 k ohms or greater

Bypass: Buffered bypass

Controls

Pedal Switch

LEVEL Knob

LOW Knob

HIGH Knob

DRIVE Knob

Indicator

CHECK Indicator: Serves as the battery check indicator.

Connectors

INPUT Jack: 1/4-inch phone type

OUTPUT Jack: 1/4-inch phone type

AC Adaptor Jack: DC 9V

Power Supply

Battery: Alkaline battery (9V, 6LR61)

AC Adaptor: PSA series (sold separately)

Current Draw

65 mA

Expected Battery Life under Continuous Use

Alkaline: Approx. 6 hours
(These figures may vary depending on actual conditions of use.)

Accessories

Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)

Battery: Alkaline battery (9V, 6LR61)

Options (Sold Separately)

AC Adaptor: PSA series

Size and Weight

Width: 73 mm (2-7/8 inches)

Depth: 129 mm (5-1/8 inches)

Height: 59 mm (2-3/8 inches)

Weight (Including Battery): 440 g (1 lb)
Add to cart
QuickView

wishlist

Wishlist

Compare
BOSS OD-3 OverDrive
₹11,655.00
Input/Output Specifications:

Nominal Input Level: -20 dBu (standard line-level input).

Input Impedance: 1 M ohm (optimal for high-impedance sources such as electric guitars).

Nominal Output Level: -20 dBu.

Output Impedance: 1 k ohm (typical for line-level outputs).

Recommended Load Impedance: 10 k ohms or greater (ensures proper signal interaction with other equipment).

Bypass:

Buffered Bypass: Ensures that the signal remains strong and clean when the pedal is turned off, preventing signal degradation.

Controls:

DRIVE Knob: Adjusts the level of distortion or overdrive applied to the signal, allowing you to achieve everything from a subtle crunch to a heavier distortion.

TONE Knob: Controls the tonal character, likely shaping the treble or high-end frequencies of the effect.

LEVEL Knob: Adjusts the overall output level of the effect, allowing you to balance the processed signal with your dry signal.

Indicator:

CHECK Indicator: Lights up to indicate when the battery is low or needs replacement, helping you avoid running out of power unexpectedly.

Connectors:

INPUT Jack: 1/4-inch phone type (used for connecting your instrument to the pedal).

OUTPUT Jack: 1/4-inch phone type (used to send the processed signal to an amplifier or the next effect in the signal chain).

DC IN Jack: For connecting an external AC power adapter (PSA series, sold separately).

Power Supply:

Battery:

Carbon-zinc 9V battery (6F22) or

Alkaline 9V battery (6LR61).

AC Adaptor: PSA series (sold separately).

Current Draw: 15 mA (low current consumption, extending battery life).

Expected Battery Life:

Carbon-zinc: Approx. 34.5 hours.

Alkaline: Approx. 56 hours (actual battery life may vary depending on usage).

Accessories:

Included: Leaflet with safety and usage information, 9V Carbon-zinc battery (6F22).

Optional: AC Adapter (PSA series, sold separately).

Size and Weight:

Width: 73 mm (2-7/8 inches).

Depth: 129 mm (5-1/8 inches).

Height: 59 mm (2-3/8 inches).

Weight (with battery): 370 g (14 oz).
Add to cart
QuickView

wishlist

Wishlist

Compare
BOSS OS-2 OverDrive/Distortion
₹11,915.00
Input/Output Specifications:

Nominal Input Level: -20 dBu (standard line-level signal).

Input Impedance: 1 M ohm (ideal for use with electric guitars or other high-impedance instruments).

Nominal Output Level: -20 dBu.

Output Impedance: 1 k ohm (suitable for most amplifiers or other devices).

Recommended Load Impedance: 10 k ohms or greater (ensures proper interaction with downstream devices).

Bypass:

Buffered Bypass: Ensures the signal is properly buffered when the effect is turned off, maintaining the integrity of the signal chain.

Controls:

COLOR Knob: Likely adjusts the tonal character or texture of the effect, possibly modifying the harmonic content or color of the distortion.

DRIVE Knob: Controls the intensity or amount of gain, affecting the distortion level.

TONE Knob: Adjusts the overall tonal balance, shaping the treble and bass frequencies.

LEVEL Knob: Controls the output volume of the effect.

Indicator:

CHECK Indicator: Indicates the status of the battery, including when it’s running low.

Connectors:

INPUT Jack: 1/4-inch phone type (standard for most instrument cables).

OUTPUT Jack: 1/4-inch phone type (for connecting to amplifiers or other effects).

DC IN Jack: For connecting an external AC adapter (PSA series, sold separately).

Power Supply:

Battery:

Carbon-zinc 9V battery (6F22) or

Alkaline 9V battery (6LR61).

AC Adaptor: PSA series (sold separately).

Current Draw: 12 mA (low power consumption).

Expected Battery Life:

Carbon-zinc: Approx. 33.5 hours.

Alkaline: Approx. 55 hours (this may vary based on usage conditions).

Accessories:

Included: Leaflet with safety information and basic usage notes, 9V Carbon-zinc battery (6F22).

Optional: AC Adapter (PSA series, sold separately).

Size and Weight:

Width: 73 mm (2-7/8 inches).

Depth: 129 mm (5-1/8 inches).

Height: 59 mm (2-3/8 inches).

Weight (including battery): 385 g (14 oz).
Add to cart
QuickView

wishlist

Wishlist

Compare
BOSS PH-3 Phase Shifter
₹14,935.00
Specifications

Nominal Input Level:

-20 dBu

Standard input level for guitar pedals.

Input Impedance:

1 M ohm

High impedance, suitable for guitars and other high-impedance instruments.

Nominal Output Level:

-20 dBu

Standard output level for the processed signal.

Output Impedance:

1 k ohm

Compatible with most amplifiers and other pedals in your signal chain.

Recommended Load Impedance:

10 k ohms or greater

Ensures optimal performance when connected to amplifiers or other devices.

Bypass

Buffered Bypass:

Preserves your guitar’s tone when the pedal is bypassed.

Controls

STAGE Switch:

Selects between different stages of modulation or effect options.

RES (Resonance) Knob:

Controls the resonance of the effect, adjusting its depth and intensity.

DEPTH Knob:

Adjusts the depth of the modulation effect.

RATE Knob:

Controls the speed of the modulation effect.

Pedal Switch:

Turns the pedal on or off.

Indicators

CHECK Indicator:

Indicates the status of the battery, also used for battery check.

Connectors

INPUT Jack:

For connecting your instrument (guitar, bass, etc.).

OUTPUT Jack:

For sending the processed signal to your amplifier or other pedals.

EXP/CTL Jack:

1/4-inch stereo phone type

For connecting an expression pedal or external control.

DC IN Jack:

For connecting an external power supply (PSA series AC adapter).

Power Supply

Battery Options:

Alkaline 9V battery (6LR61)

AC Adaptor:

PSA series (sold separately)

Current Draw:

50 mA — A moderate power consumption.

Expected Battery Life:

Alkaline: Approx. 6 hours of continuous use.

Accessories

Included:

Leaflet with safety instructions and usage guidelines.

Alkaline 9V battery (6LR61).

Optional (sold separately):

AC Adaptor: PSA series

Expression Pedal: EV-30, FV-500L, FV-500H, Roland EV-5

Footswitch (momentary-type): FS-5U, FS-6, FS-7

Size and Weight

Width:

73 mm (2-7/8 inches)

Depth:

129 mm (5-1/8 inches)

Height:

59 mm (2-3/8 inches)

Weight (including battery):

415 g (15 oz)
Add to cart