Category: BOSS
Showing 49–60 of 85 results
-
BOSS ML-2 Metal Core
₹17,083.00Add to cartSpecifications
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
- Bypass: Buffered bypass
Controls
- Pedal Switch
- LEVEL Knob
- LOW Knob
- HIGH Knob
- DIST Knob
Indicator
- CHECK Indicator: Serves as the battery check indicator.
Connectors
- INPUT Jack: 1/4-inch phone type
- OUTPUT Jack: 1/4-inch phone type
- AC Adaptor Jack: DC 9V
Power Supply
- Battery: Alkaline battery (9V, 6LR61)
- AC Adaptor: PSA series (sold separately)
Current Draw
- 60 mA
Expected Battery Life under Continuous Use
- Alkaline: Approx. 5.5 hours
(These figures may vary depending on actual conditions of use.)
Accessories
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Battery: Alkaline battery (9V, 6LR61)
Options (Sold Separately)
- AC Adaptor: PSA series
Size and Weight
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (Including Battery): 420 g (15 oz)
-
BOSS MO-2 Multi Overtone
₹14,939.00Add to cartInput/Output Specifications:
- Nominal Input Level: -20 dBu (a standard line-level signal)
- Input Impedance: 1 M ohm (suitable for high-impedance sources like guitars)
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm (affects the interaction with connected equipment)
- Recommended Load Impedance: 10 k ohms or greater (ensures proper signal transfer)
Controls:
- Pedal Switch: Engages or disengages the effect.
- BALANCE Knob: Likely controls the balance between the wet (processed) and dry (unprocessed) signals.
- TONE Knob: Adjusts the overall tone (high/low frequencies) of the effect.
- DETUNE Knob: Likely adjusts the pitch or detuning effect, creating modulation or chorus effects.
- MODE Knob: Changes the effect’s mode or type, altering how the effect behaves.
Indicators:
- CHECK Indicator: Serves as both an operational indicator and battery check light.
Connectors:
- INPUT Jack: For the instrument or signal source (likely 1/4-inch phone jack).
- OUTPUT-A (MONO) Jack: Main output for mono or mixed output.
- OUTPUT-B Jack: Additional output (for stereo or alternate routing).
- AC Adaptor Jack (DC 9V): For connecting an external power supply (sold separately).
Power Supply:
- Battery: Alkaline 9V battery (6LR61).
- AC Adaptor: PSA series (sold separately).
- Current Draw: 60 mA.
- Expected Battery Life: Approximately 3 hours (can vary based on usage).
Accessories:
- Included: Safety information leaflet, Alkaline 9V battery (6LR61).
- Optional: AC Adapter (PSA series, sold separately).
Dimensions and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (with battery): 415 g (15 oz)
-
BOSS MT-2 Metal Zone
₹11,595.00Add to cartSpecifications
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
- Bypass: Buffered bypass
Controls
- DIST Knob
- EQUALIZER MIDDLE/MID FREQ Knob
- EQUALIZER HIGH/LOW Knob
- LEVEL Knob
- Pedal Switch
Indicator
- CHECK Indicator: Used for indication of battery check.
Connectors
- INPUT Jack: 1/4-inch phone type
- OUTPUT Jack: 1/4-inch phone type
- DC IN Jack
Power Supply
- Battery: Carbon-zinc battery (9V, 6F22) or Alkaline battery (9V, 6LR61)
- AC Adaptor: PSA series (sold separately)
Current Draw
- 30 mA
Expected Battery Life under Continuous Use
- Carbon: Approx. 12.5 hours
- Alkaline: Approx. 23.5 hours
(These figures may vary depending on actual conditions of use.)
Accessories
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Battery: Carbon-zinc battery (9V, 6F22)
Options (Sold Separately)
- AC Adaptor: PSA series
Size and Weight
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (Including Battery): 385 g (14 oz)
-
BOSS MT-2W Metal Zone
₹19,505.00Add to cartSignal Specifications:
- Nominal Input Level: -20 dBu
- Standard for guitar-level input signals.
- Input Impedance: 1 M ohm
- High impedance, suitable for guitars and other high-impedance instruments.
- Nominal Output Level: -20 dBu
- Standard output level of the signal.
- Output Impedance: 1 k ohm
- Compatible with most amplifiers and pedals.
- Recommended Load Impedance: 10 k ohms or greater
- Ensures optimal performance with a wide range of amplifiers and effects chains.
Bypass:
- Buffered Bypass:
- Ensures that the signal remains intact when the pedal is turned off, maintaining your guitar’s original tone.
Controls:
- Pedal Switch:
- Turns the pedal on or off.
- Mode Switch:
- Allows you to switch between different distortion modes.
- DIST Knob:
- Adjusts the amount of distortion in the signal.
- EQUALIZER MIDDLE/MID FREQ Knob:
- Controls the middle frequencies (midrange) to shape the sound and enhance or cut specific frequencies.
- EQUALIZER HIGH/LOW Knob:
- Adjusts the high and low frequency ranges for more tonal control.
- LEVEL Knob:
- Controls the output volume of the effect.
Power Supply:
- Battery Options:
- Alkaline 9V battery (6LR61).
- Carbon-zinc 9V battery (6F22).
- AC Adaptor:
- PSA series (sold separately).
- Current Draw:
- 35 mA — Low power consumption for extended use.
- Expected Battery Life:
- Alkaline: Approx. 18 hours of continuous use.
- Carbon-zinc: Approx. 7 hours of continuous use.
Indicators:
- CHECK Indicator:
- Indicates when the battery is running low or when the pedal is engaged.
Connectors:
- INPUT Jack:
- 1/4-inch phone type for connecting your instrument (guitar, bass, etc.).
- OUTPUT Jack:
- 1/4-inch phone type for sending the processed signal to your amplifier or effects chain.
- DC IN Jack:
- For connecting an external power supply (PSA series AC adapter).
Accessories:
- Included:
- Leaflet with safety instructions and usage guidelines.
- Alkaline 9V battery (6LR61).
- Optional (sold separately):
- AC Adaptor: PSA series.
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (including battery): 440 g (1 lb).
- Nominal Input Level: -20 dBu
-
BOSS NS-2 Noise Suppressor
₹11,395.00Add to cartInput/Output Specifications:
- Nominal Input Level: -20 dBu (standard line-level input).
- Input Impedance: 1 M ohm (ideal for high-impedance sources like electric guitars).
- Nominal Output Level: -20 dBu.
- Output Impedance: 1 k ohm (standard for line-level outputs).
- Recommended Load Impedance: 10 k ohms or greater (ensures proper interaction with other equipment).
Bypass:
- Buffered Bypass: Keeps the signal intact when the effect is turned off, ensuring that the dry signal does not degrade.
Controls:
- MODE Selector Switch: Selects between different processing modes (e.g., compression, limiting, or other dynamic control types).
- DECAY Knob: Likely controls the decay time of the effect, affecting how quickly the processed signal fades or returns to the original level.
- THRESHOLD Knob: Sets the level at which the effect (compression or limiting) is triggered. Signals above this threshold will be processed, while those below remain unaffected.
- Pedal Switch: Engages or disengages the effect.
Indicators:
- CHECK/MUTE Indicator: Used for both battery check and muting status indication.
- REDUCTION Indicator: Indicates the amount of signal reduction (compression or limiting) being applied.
Connectors:
- INPUT Jack: 1/4-inch phone type (for instrument or signal input).
- OUTPUT Jack: 1/4-inch phone type (for sending the processed signal to an amplifier or next effect in the chain).
- SEND Jack: 1/4-inch phone type (used in a send-return loop for connecting external devices).
- RETURN Jack: 1/4-inch phone type (used to return the signal from an external device in a send-return loop).
- DC IN Jack: For connecting an external AC power adapter (PSA series, sold separately).
- 9V DC OUT Jack: Provides 9V power to other devices in the signal chain.
Power Supply:
- Battery:
- Carbon-zinc 9V battery (6F22) or
- Alkaline 9V battery (6LR61).
- AC Adaptor: PSA series (sold separately).
- Current Draw: 25 mA (low power consumption).
- Expected Battery Life:
- Carbon-zinc: Approx. 11 hours.
- Alkaline: Approx. 24.5 hours (may vary depending on actual usage).
Accessories:
- Included: Safety and information leaflets, 9V Carbon-zinc battery (6F22).
- Optional: AC Adapter (PSA series), Parallel DC Cord (PCS-20A, sold separately).
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (with battery): 415 g (15 oz).
-
BOSS OD-1X Overdrive
₹18,564.00Add to cartSpecifications
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
- Bypass: Buffered bypass
Controls
- Pedal Switch
- LEVEL Knob
- LOW Knob
- HIGH Knob
- DRIVE Knob
Indicator
- CHECK Indicator: Serves as the battery check indicator.
Connectors
- INPUT Jack: 1/4-inch phone type
- OUTPUT Jack: 1/4-inch phone type
- AC Adaptor Jack: DC 9V
Power Supply
- Battery: Alkaline battery (9V, 6LR61)
- AC Adaptor: PSA series (sold separately)
Current Draw
- 65 mA
Expected Battery Life under Continuous Use
- Alkaline: Approx. 6 hours
(These figures may vary depending on actual conditions of use.)
Accessories
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Battery: Alkaline battery (9V, 6LR61)
Options (Sold Separately)
- AC Adaptor: PSA series
Size and Weight
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (Including Battery): 440 g (1 lb)
-
BOSS OD-3 OverDrive
₹11,655.00Add to cartInput/Output Specifications:
- Nominal Input Level: -20 dBu (standard line-level input).
- Input Impedance: 1 M ohm (optimal for high-impedance sources such as electric guitars).
- Nominal Output Level: -20 dBu.
- Output Impedance: 1 k ohm (typical for line-level outputs).
- Recommended Load Impedance: 10 k ohms or greater (ensures proper signal interaction with other equipment).
Bypass:
- Buffered Bypass: Ensures that the signal remains strong and clean when the pedal is turned off, preventing signal degradation.
Controls:
- DRIVE Knob: Adjusts the level of distortion or overdrive applied to the signal, allowing you to achieve everything from a subtle crunch to a heavier distortion.
- TONE Knob: Controls the tonal character, likely shaping the treble or high-end frequencies of the effect.
- LEVEL Knob: Adjusts the overall output level of the effect, allowing you to balance the processed signal with your dry signal.
Indicator:
- CHECK Indicator: Lights up to indicate when the battery is low or needs replacement, helping you avoid running out of power unexpectedly.
Connectors:
- INPUT Jack: 1/4-inch phone type (used for connecting your instrument to the pedal).
- OUTPUT Jack: 1/4-inch phone type (used to send the processed signal to an amplifier or the next effect in the signal chain).
- DC IN Jack: For connecting an external AC power adapter (PSA series, sold separately).
Power Supply:
- Battery:
- Carbon-zinc 9V battery (6F22) or
- Alkaline 9V battery (6LR61).
- AC Adaptor: PSA series (sold separately).
- Current Draw: 15 mA (low current consumption, extending battery life).
- Expected Battery Life:
- Carbon-zinc: Approx. 34.5 hours.
- Alkaline: Approx. 56 hours (actual battery life may vary depending on usage).
Accessories:
- Included: Leaflet with safety and usage information, 9V Carbon-zinc battery (6F22).
- Optional: AC Adapter (PSA series, sold separately).
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (with battery): 370 g (14 oz).
-
BOSS OS-2 OverDrive/Distortion
₹11,915.00Add to cartInput/Output Specifications:
- Nominal Input Level: -20 dBu (standard line-level signal).
- Input Impedance: 1 M ohm (ideal for use with electric guitars or other high-impedance instruments).
- Nominal Output Level: -20 dBu.
- Output Impedance: 1 k ohm (suitable for most amplifiers or other devices).
- Recommended Load Impedance: 10 k ohms or greater (ensures proper interaction with downstream devices).
Bypass:
- Buffered Bypass: Ensures the signal is properly buffered when the effect is turned off, maintaining the integrity of the signal chain.
Controls:
- COLOR Knob: Likely adjusts the tonal character or texture of the effect, possibly modifying the harmonic content or color of the distortion.
- DRIVE Knob: Controls the intensity or amount of gain, affecting the distortion level.
- TONE Knob: Adjusts the overall tonal balance, shaping the treble and bass frequencies.
- LEVEL Knob: Controls the output volume of the effect.
Indicator:
- CHECK Indicator: Indicates the status of the battery, including when it’s running low.
Connectors:
- INPUT Jack: 1/4-inch phone type (standard for most instrument cables).
- OUTPUT Jack: 1/4-inch phone type (for connecting to amplifiers or other effects).
- DC IN Jack: For connecting an external AC adapter (PSA series, sold separately).
Power Supply:
- Battery:
- Carbon-zinc 9V battery (6F22) or
- Alkaline 9V battery (6LR61).
- AC Adaptor: PSA series (sold separately).
- Current Draw: 12 mA (low power consumption).
- Expected Battery Life:
- Carbon-zinc: Approx. 33.5 hours.
- Alkaline: Approx. 55 hours (this may vary based on usage conditions).
Accessories:
- Included: Leaflet with safety information and basic usage notes, 9V Carbon-zinc battery (6F22).
- Optional: AC Adapter (PSA series, sold separately).
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (including battery): 385 g (14 oz).
-
BOSS PH-3 Phase Shifter
₹14,935.00Add to cartSpecifications
- Nominal Input Level:
- -20 dBu
- Standard input level for guitar pedals.
- Input Impedance:
- 1 M ohm
- High impedance, suitable for guitars and other high-impedance instruments.
- Nominal Output Level:
- -20 dBu
- Standard output level for the processed signal.
- Output Impedance:
- 1 k ohm
- Compatible with most amplifiers and other pedals in your signal chain.
- Recommended Load Impedance:
- 10 k ohms or greater
- Ensures optimal performance when connected to amplifiers or other devices.
Bypass
- Buffered Bypass:
- Preserves your guitar’s tone when the pedal is bypassed.
Controls
- STAGE Switch:
- Selects between different stages of modulation or effect options.
- RES (Resonance) Knob:
- Controls the resonance of the effect, adjusting its depth and intensity.
- DEPTH Knob:
- Adjusts the depth of the modulation effect.
- RATE Knob:
- Controls the speed of the modulation effect.
- Pedal Switch:
- Turns the pedal on or off.
Indicators
- CHECK Indicator:
- Indicates the status of the battery, also used for battery check.
Connectors
- INPUT Jack:
- For connecting your instrument (guitar, bass, etc.).
- OUTPUT Jack:
- For sending the processed signal to your amplifier or other pedals.
- EXP/CTL Jack:
- 1/4-inch stereo phone type
- For connecting an expression pedal or external control.
- DC IN Jack:
- For connecting an external power supply (PSA series AC adapter).
Power Supply
- Battery Options:
- Alkaline 9V battery (6LR61)
- AC Adaptor:
- PSA series (sold separately)
- Current Draw:
- 50 mA — A moderate power consumption.
- Expected Battery Life:
- Alkaline: Approx. 6 hours of continuous use.
Accessories
- Included:
- Leaflet with safety instructions and usage guidelines.
- Alkaline 9V battery (6LR61).
- Optional (sold separately):
- AC Adaptor: PSA series
- Expression Pedal: EV-30, FV-500L, FV-500H, Roland EV-5
- Footswitch (momentary-type): FS-5U, FS-6, FS-7
Size and Weight
- Width:
- 73 mm (2-7/8 inches)
- Depth:
- 129 mm (5-1/8 inches)
- Height:
- 59 mm (2-3/8 inches)
- Weight (including battery):
- 415 g (15 oz)
- Nominal Input Level:
-
Boss PS-5 SUPER Pitch Shifter Guitar Effects Pedal
Original price was: ₹23,327.00.₹18,500.00Current price is: ₹18,500.00.Add to cart- Compact pedal with high-quality pitch shifting, Harmonist and tremolo arm effects
- Intelligent, key-specific pitch shifting of single notes using simple Pitch and Key knobs with scale display
- Key Shift outputs continuous shifted tone for playing in different keys
- Detune effect provides slight shifting for “fattening” a guitar sound
- Tremolo Arm effect bends single notes up or down to a pre-selected value when pedal is activated; optional expression pedal can be connected for realtime control
- Flutter effect simulates fast or slow “slap” or “slam” of tremolo bar when pedal is depressed
- BOSS 5-year warranty
-
BOSS RC-1 Loop Station
₹12,488.00Add to cartSpecifications
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
- Maximum Recording Time: Approximately 12 minutes
Controls
- Pedal switch
- LEVEL knob
Indicators
- CHECK indicator
- LOOP indicator
Connectors
- INPUT A (MONO) jack: 1/4-inch phone type
- INPUT B jack: 1/4-inch phone type
- OUTPUT A (MONO) jack: 1/4-inch phone type
- OUTPUT B jack: 1/4-inch phone type
- STOP/UNDO jack: 1/4-inch TRS phone type
- DC IN jack
Power Supply
- Alkaline battery: 9 V, 6LR61
- AC adaptor: PSA series (sold separately)
- Current Draw: 95 mA
- Expected battery life under continuous use (these figures will vary depending on actual conditions of use):
- Alkaline: Approx. 3 hours
Accessories
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Alkaline battery: 9 V, 6LR61
Options (sold separately)
- AC adaptor: PSA series
- Footswitch: FS-5U, FS-6, FS-7
Size and Weight
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight: 430 g (1 lb)
-
BOSS RC-10R Rhythm Loop Station
Original price was: ₹39,405.00.₹35,464.00Current price is: ₹35,464.00.Add to cartSpecifications (Looper)
- Sampling Frequency: 44.1 kHz
- AD/DA Conversion: 32 bits
- Processing: 32-bit floating point
- Recording/Playback:
- Maximum Recording Time: Approx. 6 hours (stereo)
- Maximum Phrase Memory: 99
- Number of Tracks: 2
- Data Format: WAV (44.1 kHz, 32-bit float, stereo)
Specifications (Rhythm)
- Rhythm Type: 280 types or greater
- Rhythm Control: Intro, Pattern 1, Pattern 1 Fill, Pattern 2, Pattern 2 Fill, Ending
- Rhythm Kit: 16 types
- Maximum Polyphony: 24 voices
- Effect: Reverb (only for rhythm part)
Specifications (Common)
- Memory: 99
Input/Output
- Nominal Input Level:
- INPUT A/MONO, B: -10 dBu
- Maximum Input Level:
- INPUT A/MONO, B: +8 dBu
- Input Impedance:
- INPUT A/MONO, B: 1 M ohm
- Nominal Output Level:
- OUTPUT A/MONO, B: -10 dBu
- Maximum Output Level:
- OUTPUT A/MONO, B: +8 dBu
- Output Impedance:
- OUTPUT A/MONO, B: 1 k ohm
- Recommended Load Impedance:
- OUTPUT A/MONO, B: 10 k ohms or greater
- Bypass: Buffered bypass
Controls
- RHYTHM switch
- LOOP switch
- VALUE knob
- RHYTHM LEVEL knob
- LOOP LEVEL knob
- MENU button
- EXIT button
Display
- Display: 16 characters x 2 lines LCD (with backlit)
- Indicators:
- RHYTHM indicator
- LOOP indicator
Connectors
- INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type
- CTL 1, 2/EXP jack: 1/4-inch TRS phone type
- MIDI (IN, OUT) jacks: Stereo miniature type
- DC IN jack
- USB COMPUTER port: USB micro B type
Power Supply
- AC Adaptor
- Current Draw: 250 mA
Accessories
- Owner’s Manual
- Leaflet: “USING THE UNIT SAFELY”
- AC Adaptor
- Rubber foot x 4
Options (sold separately)
- Footswitch: FS-5U
- Dual footswitch: FS-6, FS-7
- Expression Pedal: FV-500H, FV-500L, EV-30, Roland EV-5
- TRS/MIDI Connecting Cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535
Size and Weight
- Width: 101 mm (4 inches)
- Depth: 138 mm (5-7/16 inches)
- Height (excluding rubber foot): 63 mm (2-1/2 inches)
- Height (including rubber foot): 65 mm (2-9/16 inches)
- Weight (excluding AC Adaptor): 620 g (1 lb 6 oz)
Product Showcase
