Category: Single Units
Showing 37–45 of 45 results
-
BOSS SD-1W SUPER OverDrive
₹19,265.00Add to cartSpecificationsNominal Input Level-20 dBuInput Impedance1 M ohmNominal Output Level-20 dBuOutput Impedance1 k ohmRecommended Load Impedance10 k ohms or greaterControlsPedal switch
Mode switch
LEVEL knob
TONE knob
DRIVE knobIndicatorCHECK indicator (Serves also as battery check indicator)ConnectorsINPUT jack
OUTPUT jack
DC IN jackPower SupplyAlkaline battery (9 V, 6LR61) or Carbon-zinc battery (9 V, 6F22)
AC adaptor (sold separately)Current Draw15 mAExpected battery life under continuous use (These figures will vary depending on the actual conditions of use.)Carbon: Approx. 25 hours
Alkaline: Approx. 42 hoursAccessoriesLeaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTE,” and “Information”)
Carbon-zinc battery (9 V, 6F22)Option (sold separately)AC adaptor (PSA series)Size and WeightWidth73 mm
2-7/8 inchesDepth129 mm
5-1/8 inchesHeight59 mm
2-3/8 inchesWeight430 g
1 lb -
BOSS SL-2 Slicer
₹20,046.00Add to cartSpecifications
- Sample Rate:
- 48 kHz
- AD Conversion:
- 24 bits + AF method (Adaptive Focus method)
- This proprietary method from Roland & BOSS improves the signal-to-noise (SN) ratio of the AD and DA converters.
- DA Conversion:
- 32 bits
- Patterns:
- 88 patterns
Input and Output
- Nominal Input Level:
- INPUT A (MONO), INPUT B: -20 dBu
- Maximum Input Level:
- INPUT A (MONO), INPUT B: +7 dBu
- Input Impedance:
- INPUT A (MONO), INPUT B: 1 MΩ
- Nominal Output Level:
- OUTPUT A (MONO), OUTPUT B: -20 dBu
- Maximum Output Level:
- OUTPUT A (MONO), OUTPUT B: +7 dBu
- Output Impedance:
- OUTPUT A (MONO), OUTPUT B: 1 kΩ
- Recommended Load Impedance:
- OUTPUT A (MONO), OUTPUT B: 10 kΩ or greater
- Bypass:
- Buffered bypass
Controls
- TYPE Knob:
- Selects different types of effects.
- VARIATION Knob:
- Adjusts the variation of the effect.
- ATTACK Knob:
- Controls the attack of the effect.
- DUTY Knob:
- Adjusts the duty cycle of the effect.
- TEMPO Knob:
- Controls the tempo for time-based effects.
- BALANCE Knob:
- Adjusts the balance between the outputs.
- Pedal Switch:
- Activates or deactivates the effect.
Indicators
- CHECK Indicator:
- Used for indicating tempo and checking the battery.
Connectors
- INPUT A (MONO) Jack, INPUT B Jack:
- 1/4-inch phone type
- For instrument input.
- OUTPUT A (MONO) Jack, OUTPUT B Jack:
- 1/4-inch phone type
- For audio output.
- CTL/EXP Jack:
- 1/4-inch TRS phone type
- For control or expression pedal.
- DC IN Jack:
- For external power supply.
- MIDI IN Jack:
- Stereo miniature phone type
- For MIDI input.
- USB Port:
- USB B
- For connection to a computer or other devices.
Power Supply
- Battery Options:
- Alkaline: 9V, 6LR61 or 6LF22 (commercially available)
- AC Adaptor:
- PSA series (sold separately)
- Current Draw:
- 95 mA
- Expected Battery Life (under continuous use):
- Alkaline: Approx. 2.5 hours
- Note: These figures may vary depending on actual usage conditions.
Accessories
- Included:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Dry Battery (9V, 6LR61 or 6LF22)
- Optional (sold separately):
- AC Adaptor: PSA series
- Footswitch: FS-5U
- Dual Footswitch: FS-6, FS-7
- Expression Pedal: FV-500H, FV-500L, EV-30, Roland EV-5
- TRS/MIDI Connecting Cables: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535
Size and Weight
- Width:
- 73 mm (2-7/8 inches)
- Depth:
- 129 mm (5-1/8 inches)
- Height:
- 59 mm (2-3/8 inches)
- Weight (including battery):
- 450 g (1 lb)
- Sample Rate:
-
BOSS ST-2 Power Stack
₹11,495.00Add to cartSpecifications
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
- Bypass: Buffered bypass
Controls
- SOUND Knob
- TREBLE Knob
- BASS Knob
- LEVEL Knob
- Pedal Switch
Indicator
- CHECK Indicator: Used for indication of check battery.
Connectors
- INPUT Jack: 1/4-inch phone type
- OUTPUT Jack: 1/4-inch phone type
- DC IN Jack
Power Supply
- Battery: Alkaline battery (9V, 6LR61)
- AC Adaptor: PSA series (sold separately)
Current Draw
- 65 mA
Expected Battery Life under Continuous Use
- Alkaline: Approx. 5.5 hours
(These figures may vary depending on actual conditions of use.)
Accessories
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Battery: Alkaline battery (9V, 6LR61)
Options (Sold Separately)
- AC Adaptor: PSA series
Size and Weight
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (Including Battery): 410 g (15 oz)
-
BOSS SY-1 Synthesizer
₹25,040.00Add to cartInput/Output Specifications:
- Nominal Input Level: -20 dBu (a standard reference level for line-level inputs)
- Input Impedance: 2.2 M ohms (a high impedance, suitable for guitars or basses)
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohms (affects the interaction with downstream equipment like amplifiers)
- Recommended Load Impedance: 10 k ohms or greater (ensures proper signal transfer and tone preservation)
Controls:
- Pedal Switch: Activates or deactivates the effect.
- GUITAR/BASS Switch: Likely switches between optimal settings for guitar or bass use.
- TYPE Knob: Likely selects different types of effects or tones.
- VARIATION Knob: Likely modifies the effect’s variation or intensity.
- TONE Knob: Adjusts the high/low frequency balance.
- DEPTH Knob: Controls the depth or intensity of the effect.
- EFFECT Knob: Controls the overall effect level.
- DIRECT Knob: May control the blend between dry (direct) and processed signal.
- CHECK Indicator: Serves as both an operational check and a battery indicator.
Connectors:
- INPUT: 1/4-inch phone jack.
- OUTPUT: 1/4-inch phone jack.
- SEND: 1/4-inch phone jack (for send effects loops).
- RETURN: 1/4-inch phone jack (for returning effects loops).
- EXP/CTL Jack: Stereo 1/4-inch jack for connecting an expression pedal or external control.
- DC IN Jack: For connecting to a power supply (AC adapter).
Power Supply:
- Battery: Alkaline 9V battery (6LR61).
- AC Adapter: PSA series (sold separately).
- Current Draw: 115 mA.
- Expected Battery Life: Approximately 2 hours (may vary depending on usage conditions).
Accessories:
- Included: Safety information leaflet, Alkaline 9V battery (6LR61).
- Optional: AC Adapter (PSA series), Footswitch (FS-5U), Dual Footswitch (FS-6, FS-7), Expression Pedal (FV-500H, FV-500L, EV-30, Roland EV-5).
Dimensions and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (with battery): 450 g (1 lb).
-
BOSS TR-2 Tremolo
₹11,395.00Add to cartInput/Output Specifications:
- Nominal Input Level: -20 dBu (standard line-level signal).
- Input Impedance: 1 M ohm (suitable for use with high-impedance sources like electric guitars).
- Nominal Output Level: -20 dBu.
- Output Impedance: 1 k ohm (ideal for connecting to amplifiers or other effects units).
- Recommended Load Impedance: 10 k ohms or greater (ensures proper performance and signal transfer).
Bypass:
- Buffered Bypass: Keeps the signal intact when the pedal is off, ensuring the signal doesn’t degrade through the pedal when bypassed.
Controls:
- DEPTH Knob: Controls the intensity or depth of the modulation effect (such as the amount of variation in pitch or tone).
- RATE Knob: Adjusts the speed or rate at which the modulation effect occurs (e.g., speed of chorus or phaser).
- WAVE Knob: Likely adjusts the waveform of the modulation effect (e.g., from sine to square wave, which changes the nature of the modulation).
Indicator:
- CHECK Indicator: Displays the status of the battery, helping users check if it needs replacing.
Connectors:
- INPUT Jack: 1/4-inch phone type (for instrument input like guitar or bass).
- OUTPUT Jack: 1/4-inch phone type (for sending the effect signal to an amplifier or next effect in the chain).
- DC IN Jack: For connecting an external AC power adapter (PSA series, sold separately).
Power Supply:
- Battery:
- Carbon-zinc 9V battery (6F22) or
- Alkaline 9V battery (6LR61).
- AC Adaptor: PSA series (sold separately).
- Current Draw: 25 mA (low current consumption).
- Expected Battery Life:
- Carbon-zinc: Approx. 12 hours.
- Alkaline: Approx. 28 hours (actual battery life may vary based on usage).
Accessories:
- Included: Leaflet with safety and usage information, 9V Carbon-zinc battery (6F22).
- Optional: AC Adapter (PSA series, sold separately).
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (with battery): 385 g (14 oz).
-
BOSS TU-3 Chromatic Tuner
₹11,915.00Add to cartTuning Features:
- Tuning Range: From C0 (16.35 Hz) to C8 (4186 Hz), covering the entire range of most instruments.
- Reference Pitch (A4): Adjustable from 436 Hz to 445 Hz in 1 Hz steps, allowing you to fine-tune the reference pitch to suit your tuning needs.
- Tuning Accuracy: +/- 1 cent, providing highly precise tuning that ensures accurate intonation.
Modes:
- Chromatic Mode: A mode that allows tuning to all notes, offering maximum flexibility for all instruments.
- Chromatic Flat x2 Mode: A chromatic tuning mode with an additional flat tuning range.
- Guitar Mode: Preconfigured for standard guitar tuning.
- Guitar Flat x2 Mode: A mode allowing for flat tunings on guitar (e.g., drop tunings).
- Bass Mode: Configured for bass guitars, including low-end tuning.
- Bass Flat x3 Mode: A bass-specific mode with additional flat tunings.
Display Modes:
- Cent Mode: Displays the pitch in cents for precise tuning adjustments.
- Stream Mode: Likely shows a dynamic, stream-like visualization of the tuning process, helping the user easily see whether they’re sharp or flat.
Input/Output:
- Nominal Input Level: -20 dBu, suitable for most line-level signals.
- Input Impedance: 1 M ohm, ideal for high-impedance instruments like electric guitars or basses.
- Nominal Output Level: -20 dBu.
- Output Impedance: 1 k ohm.
- Recommended Load Impedance: 10 k ohms or greater, ensuring compatibility with most amplifiers or audio equipment.
Bypass:
- Buffered Bypass: Ensures that the signal remains strong and unaffected when the tuner is bypassed, preventing signal degradation.
Controls:
- Pedal Switch: Used to toggle the tuner on or off.
- MODE Button: Switch between different tuning modes (chromatic, guitar, bass, etc.).
- STREAM/CENT Button: Switch between display modes (Stream mode or Cent mode).
Power Supply:
- Battery:
- Carbon-zinc 9V battery (6F22) or
- Alkaline 9V battery (6LR61).
- AC Adaptor: PSA series (sold separately).
- Current Draw:
- 20 mA under normal use.
- 80 mA when High Brightness mode is on (likely for better visibility in bright environments).
- Expected Battery Life:
- Carbon-zinc: Approx. 5 hours.
- Alkaline: Approx. 21 hours.
Connectors:
- INPUT Jack: 1/4-inch phone type for connecting your instrument.
- OUTPUT Jack: 1/4-inch phone type for sending the signal to an amplifier or next device.
- BYPASS Jack: Likely for external control of bypass (for example, using a footswitch).
- DC IN Jack: For connecting an external AC power adapter (PSA series).
- DC OUT Jack: Likely allows for chaining multiple pedals or devices together.
Accessories:
- Included: Leaflet with safety and usage information, 9V Carbon-zinc battery (6F22).
- Optional: AC Adapter (PSA series), Parallel DC cord (PCS-20A, DC Plug x8).
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (including battery): 390 g (14 oz).
-
BOSS TU-3W Chromatic Tuner
₹17,222.00Add to cartSpecifications
- Tuning Range:
- C0 (16.35 Hz) to C8 (4,186 Hz)
- Reference Pitch:
- A4 = 436–445 Hz (1 Hz step)
- Tuning Accuracy:
- +/- 1 cent
- Ensures precise tuning.
- Modes:
- Chromatic
- Chromatic flat x2
- Guitar
- Guitar flat x2
- Bass
- Bass flat x3
- Display Modes:
- Cent mode
- Stream mode
Power Supply
- Battery Options:
- Alkaline: 9V, 6LR61
- Carbon-Zinc: 9V, 6F22
- AC Adaptor:
- PSA series (sold separately)
- Current Draw:
- 50 mA (DC 9V)
- 110 mA (DC 9V, when High Brightness mode is on)
- Expected Battery Life (under continuous use):
- Alkaline: Approx. 5.5 hours
- Carbon: Approx. 0.5 hours
Bypass
- Buffered Bypass or True Bypass:
- Allows you to choose between buffered or true bypass for the signal path.
Controls
- Pedal Switch:
- Activates or deactivates the tuner.
- OUTPUT Switch (BUF/THRU SW):
- Switches between buffered output or through signal.
- MODE Button:
- Switches between different tuning modes.
- STREAM/CENT Button:
- Switches between stream and cent display modes.
Indicators
- CHECK Indicator:
- Serves as a battery check indicator.
Connectors
- INPUT Jack:
- 1/4-inch phone type
- For connecting your instrument (e.g., guitar, bass).
- OUTPUT Jack:
- 1/4-inch phone type
- For sending the signal to an amplifier or other device.
- BYPASS Jack:
- 1/4-inch phone type
- For bypassing the tuner when not in use.
- DC IN Jack:
- For connecting to an external power supply.
- DC OUT Jack:
- For powering other devices.
Accessories
- Included:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Alkaline 9V battery (6LR61)
- Optional (sold separately):
- AC Adaptor: PSA series
- Parallel DC Cord: PCS-20A (DC Plug x8)
Size and Weight
- Width:
- 73 mm (2-7/8 inches)
- Depth:
- 129 mm (5-1/8 inches)
- Height:
- 59 mm (2-3/8 inches)
- Weight (including battery):
- 460 g (1 lb 1 oz)
- Tuning Range:
-
BOSS VB-2W Vibrato
₹24,511.00Add to cartSpecifications
- Modes:
3 modes
- LATCH
- UNLATCH
- BYPASS
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
Output Section:
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
Bypass:
- Buffered bypass
Controls:
- Pedal switch
- Standard/Custom switch
- RATE knob
- DEPTH knob
- RISE TIME knob
- MODE knob
Indicator:
- CHECK indicator (Serves also as battery check indicator)
Connectors:
- INPUT jack
- OUTPUT jack
- DEPTH jack
- DC IN jack
Power Supply:
- Alkaline battery (9V, 6LR61) or Carbon-zinc battery (9V, 6F22)
- AC adaptor (sold separately)
- Current Draw: 35 mA
- Expected battery life under continuous use:
- Alkaline: Approx. 22 hours
- Carbon: Approx. 4 hours
These figures will vary depending on the actual conditions of use.
Accessories:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTE,” and “Information”)
- Alkaline battery (9V, 6LR61)
Options (sold separately):
- AC adaptor: PSA series
- Expression Pedal: FV-500H, FV-500L, Roland EV-5
Size and Weight:
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (including battery): 450 g (1 lb)
- Modes:
-
BOSS VO-1 Vocoder
₹28,597.00Add to cartSpecifications
Modes
- 4 modes:
- ADVANCED
- VINTAGE
- TALK BOX
- CHOIR
Input/Output Levels and Impedance
- Nominal Input Level:
- INPUT, RETURN: -20 dBu
- MIC: -40 dBu (MIC SENS: LOW)
- Input Impedance:
- INPUT, RETURN: 1 M ohm
- MIC: 4 k ohms
- Nominal Output Level:
- OUTPUT, SEND: -20 dBu
- Output Impedance:
- OUTPUT, SEND: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
- Bypass: Buffered bypass
Controls
- Pedal switch
- MIC SENS switch
- MODE knob
- COLOR knob
- TONE knob
- BLEND knob
- LEVEL knob
Indicators
- CHECK indicator (also serves as battery check indicator)
Connectors
- INPUT jack
- MIC jack: XLR type
- RETURN jack
- OUTPUT jack
- SEND jack
- DC IN jack
Power Supply
- Alkaline battery: 9V, 6LR61
- AC Adaptor: PSA series (sold separately)
- Current Draw: 70 mA
- Expected Battery Life under Continuous Use:
- Alkaline: Approx. 4 hours
- Battery life may vary depending on usage conditions
Accessories
- Leaflet: “USING THE UNIT SAFELY,” “IMPORTANT NOTE,” and “Information”
- Alkaline Battery: 9V, 6LR61
Options (sold separately)
- AC Adaptor: PSA series
Size and Weight
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (including battery): 430 g (1 lb)
- 4 modes:
Product Showcase
