Category: Single Units

Showing 25–36 of 45 results

• 

  wishlist

  BOSS MT-2 Metal Zone

  ₹11,595.00

  Specifications

  • Nominal Input Level: -20 dBu
  • Input Impedance: 1 M ohm
  • Nominal Output Level: -20 dBu
  • Output Impedance: 1 k ohm
  • Recommended Load Impedance: 10 k ohms or greater
  • Bypass: Buffered bypass

  Controls

  • DIST Knob
  • EQUALIZER MIDDLE/MID FREQ Knob
  • EQUALIZER HIGH/LOW Knob
  • LEVEL Knob
  • Pedal Switch

  Indicator

  • CHECK Indicator: Used for indication of battery check.

  Connectors

  • INPUT Jack: 1/4-inch phone type
  • OUTPUT Jack: 1/4-inch phone type
  • DC IN Jack

  Power Supply

  • Battery: Carbon-zinc battery (9V, 6F22) or Alkaline battery (9V, 6LR61)
  • AC Adaptor: PSA series (sold separately)

  Current Draw

  • 30 mA

  Expected Battery Life under Continuous Use

  • Carbon: Approx. 12.5 hours
  • Alkaline: Approx. 23.5 hours
    (These figures may vary depending on actual conditions of use.)

  Accessories

  • Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
  • Battery: Carbon-zinc battery (9V, 6F22)

  Options (Sold Separately)

  • AC Adaptor: PSA series

  Size and Weight

  • Width: 73 mm (2-7/8 inches)
  • Depth: 129 mm (5-1/8 inches)
  • Height: 59 mm (2-3/8 inches)
  • Weight (Including Battery): 385 g (14 oz)

  Add to cart
• 

  wishlist

  BOSS MT-2W Metal Zone

  ₹19,505.00

  Signal Specifications:

  • Nominal Input Level: -20 dBu
    • Standard for guitar-level input signals.
  • Input Impedance: 1 M ohm
    • High impedance, suitable for guitars and other high-impedance instruments.
  • Nominal Output Level: -20 dBu
    • Standard output level of the signal.
  • Output Impedance: 1 k ohm
    • Compatible with most amplifiers and pedals.
  • Recommended Load Impedance: 10 k ohms or greater
    • Ensures optimal performance with a wide range of amplifiers and effects chains.

  Bypass:

  • Buffered Bypass:
    • Ensures that the signal remains intact when the pedal is turned off, maintaining your guitar’s original tone.

  Controls:

  • Pedal Switch:
    • Turns the pedal on or off.
  • Mode Switch:
    • Allows you to switch between different distortion modes.
  • DIST Knob:
    • Adjusts the amount of distortion in the signal.
  • EQUALIZER MIDDLE/MID FREQ Knob:
    • Controls the middle frequencies (midrange) to shape the sound and enhance or cut specific frequencies.
  • EQUALIZER HIGH/LOW Knob:
    • Adjusts the high and low frequency ranges for more tonal control.
  • LEVEL Knob:
    • Controls the output volume of the effect.

  Power Supply:

  • Battery Options:
    • Alkaline 9V battery (6LR61).
    • Carbon-zinc 9V battery (6F22).
  • AC Adaptor:
    • PSA series (sold separately).
  • Current Draw:
    • 35 mA — Low power consumption for extended use.
  • Expected Battery Life:
    • Alkaline: Approx. 18 hours of continuous use.
    • Carbon-zinc: Approx. 7 hours of continuous use.

  Indicators:

  • CHECK Indicator:
    • Indicates when the battery is running low or when the pedal is engaged.

  Connectors:

  • INPUT Jack:
    • 1/4-inch phone type for connecting your instrument (guitar, bass, etc.).
  • OUTPUT Jack:
    • 1/4-inch phone type for sending the processed signal to your amplifier or effects chain.
  • DC IN Jack:
    • For connecting an external power supply (PSA series AC adapter).

  Accessories:

  • Included:
    • Leaflet with safety instructions and usage guidelines.
    • Alkaline 9V battery (6LR61).
  • Optional (sold separately):
    • AC Adaptor: PSA series.

  Size and Weight:

  • Width: 73 mm (2-7/8 inches).
  • Depth: 129 mm (5-1/8 inches).
  • Height: 59 mm (2-3/8 inches).
  • Weight (including battery): 440 g (1 lb).

  Add to cart
• 

  wishlist

  BOSS NS-2 Noise Suppressor

  ₹11,395.00

  Input/Output Specifications:

  • Nominal Input Level: -20 dBu (standard line-level input).
  • Input Impedance: 1 M ohm (ideal for high-impedance sources like electric guitars).
  • Nominal Output Level: -20 dBu.
  • Output Impedance: 1 k ohm (standard for line-level outputs).
  • Recommended Load Impedance: 10 k ohms or greater (ensures proper interaction with other equipment).

  Bypass:

  • Buffered Bypass: Keeps the signal intact when the effect is turned off, ensuring that the dry signal does not degrade.

  Controls:

  • MODE Selector Switch: Selects between different processing modes (e.g., compression, limiting, or other dynamic control types).
  • DECAY Knob: Likely controls the decay time of the effect, affecting how quickly the processed signal fades or returns to the original level.
  • THRESHOLD Knob: Sets the level at which the effect (compression or limiting) is triggered. Signals above this threshold will be processed, while those below remain unaffected.
  • Pedal Switch: Engages or disengages the effect.

  Indicators:

  • CHECK/MUTE Indicator: Used for both battery check and muting status indication.
  • REDUCTION Indicator: Indicates the amount of signal reduction (compression or limiting) being applied.

  Connectors:

  • INPUT Jack: 1/4-inch phone type (for instrument or signal input).
  • OUTPUT Jack: 1/4-inch phone type (for sending the processed signal to an amplifier or next effect in the chain).
  • SEND Jack: 1/4-inch phone type (used in a send-return loop for connecting external devices).
  • RETURN Jack: 1/4-inch phone type (used to return the signal from an external device in a send-return loop).
  • DC IN Jack: For connecting an external AC power adapter (PSA series, sold separately).
  • 9V DC OUT Jack: Provides 9V power to other devices in the signal chain.

  Power Supply:

  • Battery:
    • Carbon-zinc 9V battery (6F22) or
    • Alkaline 9V battery (6LR61).
  • AC Adaptor: PSA series (sold separately).
  • Current Draw: 25 mA (low power consumption).
  • Expected Battery Life:
    • Carbon-zinc: Approx. 11 hours.
    • Alkaline: Approx. 24.5 hours (may vary depending on actual usage).

  Accessories:

  • Included: Safety and information leaflets, 9V Carbon-zinc battery (6F22).
  • Optional: AC Adapter (PSA series), Parallel DC Cord (PCS-20A, sold separately).

  Size and Weight:

  • Width: 73 mm (2-7/8 inches).
  • Depth: 129 mm (5-1/8 inches).
  • Height: 59 mm (2-3/8 inches).
  • Weight (with battery): 415 g (15 oz).

  Add to cart
• 

  wishlist

  BOSS OD-1X Overdrive

  ₹18,564.00

  Specifications

  • Nominal Input Level: -20 dBu
  • Input Impedance: 1 M ohm
  • Nominal Output Level: -20 dBu
  • Output Impedance: 1 k ohm
  • Recommended Load Impedance: 10 k ohms or greater
  • Bypass: Buffered bypass

  Controls

  • Pedal Switch
  • LEVEL Knob
  • LOW Knob
  • HIGH Knob
  • DRIVE Knob

  Indicator

  • CHECK Indicator: Serves as the battery check indicator.

  Connectors

  • INPUT Jack: 1/4-inch phone type
  • OUTPUT Jack: 1/4-inch phone type
  • AC Adaptor Jack: DC 9V

  Power Supply

  • Battery: Alkaline battery (9V, 6LR61)
  • AC Adaptor: PSA series (sold separately)

  Current Draw

  • 65 mA

  Expected Battery Life under Continuous Use

  • Alkaline: Approx. 6 hours
    (These figures may vary depending on actual conditions of use.)

  Accessories

  • Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
  • Battery: Alkaline battery (9V, 6LR61)

  Options (Sold Separately)

  • AC Adaptor: PSA series

  Size and Weight

  • Width: 73 mm (2-7/8 inches)
  • Depth: 129 mm (5-1/8 inches)
  • Height: 59 mm (2-3/8 inches)
  • Weight (Including Battery): 440 g (1 lb)

  Add to cart
• 

  wishlist

  BOSS OD-3 OverDrive

  ₹11,655.00

  Input/Output Specifications:

  • Nominal Input Level: -20 dBu (standard line-level input).
  • Input Impedance: 1 M ohm (optimal for high-impedance sources such as electric guitars).
  • Nominal Output Level: -20 dBu.
  • Output Impedance: 1 k ohm (typical for line-level outputs).
  • Recommended Load Impedance: 10 k ohms or greater (ensures proper signal interaction with other equipment).

  Bypass:

  • Buffered Bypass: Ensures that the signal remains strong and clean when the pedal is turned off, preventing signal degradation.

  Controls:

  • DRIVE Knob: Adjusts the level of distortion or overdrive applied to the signal, allowing you to achieve everything from a subtle crunch to a heavier distortion.
  • TONE Knob: Controls the tonal character, likely shaping the treble or high-end frequencies of the effect.
  • LEVEL Knob: Adjusts the overall output level of the effect, allowing you to balance the processed signal with your dry signal.

  Indicator:

  • CHECK Indicator: Lights up to indicate when the battery is low or needs replacement, helping you avoid running out of power unexpectedly.

  Connectors:

  • INPUT Jack: 1/4-inch phone type (used for connecting your instrument to the pedal).
  • OUTPUT Jack: 1/4-inch phone type (used to send the processed signal to an amplifier or the next effect in the signal chain).
  • DC IN Jack: For connecting an external AC power adapter (PSA series, sold separately).

  Power Supply:

  • Battery:
    • Carbon-zinc 9V battery (6F22) or
    • Alkaline 9V battery (6LR61).
  • AC Adaptor: PSA series (sold separately).
  • Current Draw: 15 mA (low current consumption, extending battery life).
  • Expected Battery Life:
    • Carbon-zinc: Approx. 34.5 hours.
    • Alkaline: Approx. 56 hours (actual battery life may vary depending on usage).

  Accessories:

  • Included: Leaflet with safety and usage information, 9V Carbon-zinc battery (6F22).
  • Optional: AC Adapter (PSA series, sold separately).

  Size and Weight:

  • Width: 73 mm (2-7/8 inches).
  • Depth: 129 mm (5-1/8 inches).
  • Height: 59 mm (2-3/8 inches).
  • Weight (with battery): 370 g (14 oz).

  Add to cart
• 

  wishlist

  BOSS OS-2 OverDrive/Distortion

  ₹11,915.00

  Input/Output Specifications:

  • Nominal Input Level: -20 dBu (standard line-level signal).
  • Input Impedance: 1 M ohm (ideal for use with electric guitars or other high-impedance instruments).
  • Nominal Output Level: -20 dBu.
  • Output Impedance: 1 k ohm (suitable for most amplifiers or other devices).
  • Recommended Load Impedance: 10 k ohms or greater (ensures proper interaction with downstream devices).

  Bypass:

  • Buffered Bypass: Ensures the signal is properly buffered when the effect is turned off, maintaining the integrity of the signal chain.

  Controls:

  • COLOR Knob: Likely adjusts the tonal character or texture of the effect, possibly modifying the harmonic content or color of the distortion.
  • DRIVE Knob: Controls the intensity or amount of gain, affecting the distortion level.
  • TONE Knob: Adjusts the overall tonal balance, shaping the treble and bass frequencies.
  • LEVEL Knob: Controls the output volume of the effect.

  Indicator:

  • CHECK Indicator: Indicates the status of the battery, including when it’s running low.

  Connectors:

  • INPUT Jack: 1/4-inch phone type (standard for most instrument cables).
  • OUTPUT Jack: 1/4-inch phone type (for connecting to amplifiers or other effects).
  • DC IN Jack: For connecting an external AC adapter (PSA series, sold separately).

  Power Supply:

  • Battery:
    • Carbon-zinc 9V battery (6F22) or
    • Alkaline 9V battery (6LR61).
  • AC Adaptor: PSA series (sold separately).
  • Current Draw: 12 mA (low power consumption).
  • Expected Battery Life:
    • Carbon-zinc: Approx. 33.5 hours.
    • Alkaline: Approx. 55 hours (this may vary based on usage conditions).

  Accessories:

  • Included: Leaflet with safety information and basic usage notes, 9V Carbon-zinc battery (6F22).
  • Optional: AC Adapter (PSA series, sold separately).

  Size and Weight:

  • Width: 73 mm (2-7/8 inches).
  • Depth: 129 mm (5-1/8 inches).
  • Height: 59 mm (2-3/8 inches).
  • Weight (including battery): 385 g (14 oz).

  Add to cart
• 

  wishlist

  BOSS PH-3 Phase Shifter

  ₹14,935.00

  Specifications

  • Nominal Input Level:
    • -20 dBu
    • Standard input level for guitar pedals.
  • Input Impedance:
    • 1 M ohm
    • High impedance, suitable for guitars and other high-impedance instruments.
  • Nominal Output Level:
    • -20 dBu
    • Standard output level for the processed signal.
  • Output Impedance:
    • 1 k ohm
    • Compatible with most amplifiers and other pedals in your signal chain.
  • Recommended Load Impedance:
    • 10 k ohms or greater
    • Ensures optimal performance when connected to amplifiers or other devices.

  ---

  Bypass

  • Buffered Bypass:
    • Preserves your guitar’s tone when the pedal is bypassed.

  ---

  Controls

  • STAGE Switch:
    • Selects between different stages of modulation or effect options.
  • RES (Resonance) Knob:
    • Controls the resonance of the effect, adjusting its depth and intensity.
  • DEPTH Knob:
    • Adjusts the depth of the modulation effect.
  • RATE Knob:
    • Controls the speed of the modulation effect.
  • Pedal Switch:
    • Turns the pedal on or off.

  ---

  Indicators

  • CHECK Indicator:
    • Indicates the status of the battery, also used for battery check.

  ---

  Connectors

  • INPUT Jack:
    • For connecting your instrument (guitar, bass, etc.).
  • OUTPUT Jack:
    • For sending the processed signal to your amplifier or other pedals.
  • EXP/CTL Jack:
    • 1/4-inch stereo phone type
    • For connecting an expression pedal or external control.
  • DC IN Jack:
    • For connecting an external power supply (PSA series AC adapter).

  ---

  Power Supply

  • Battery Options:
    • Alkaline 9V battery (6LR61)
  • AC Adaptor:
    • PSA series (sold separately)
  • Current Draw:
    • 50 mA — A moderate power consumption.
  • Expected Battery Life:
    • Alkaline: Approx. 6 hours of continuous use.

  ---

  Accessories

  • Included:
    • Leaflet with safety instructions and usage guidelines.
    • Alkaline 9V battery (6LR61).
  • Optional (sold separately):
    • AC Adaptor: PSA series
    • Expression Pedal: EV-30, FV-500L, FV-500H, Roland EV-5
    • Footswitch (momentary-type): FS-5U, FS-6, FS-7

  ---

  Size and Weight

  • Width:
    • 73 mm (2-7/8 inches)
  • Depth:
    • 129 mm (5-1/8 inches)
  • Height:
    • 59 mm (2-3/8 inches)
  • Weight (including battery):
    • 415 g (15 oz)

  Add to cart
• Sale!

  wishlist

  Boss PS-5 SUPER Pitch Shifter Guitar Effects Pedal

  ₹23,327.00 Original price was: ₹23,327.00.₹18,500.00Current price is: ₹18,500.00.

  • Compact pedal with high-quality pitch shifting, Harmonist and tremolo arm effects
  • Intelligent, key-specific pitch shifting of single notes using simple Pitch and Key knobs with scale display
  • Key Shift outputs continuous shifted tone for playing in different keys
  • Detune effect provides slight shifting for “fattening” a guitar sound
  • Tremolo Arm effect bends single notes up or down to a pre-selected value when pedal is activated; optional expression pedal can be connected for realtime control
  • Flutter effect simulates fast or slow “slap” or “slam” of tremolo bar when pedal is depressed
  • BOSS 5-year warranty

  Add to cart
• 

  wishlist

  BOSS RC-1 Loop Station

  ₹12,488.00

  Specifications

  • Nominal Input Level: -20 dBu
  • Input Impedance: 1 M ohm
  • Nominal Output Level: -20 dBu
  • Output Impedance: 1 k ohm
  • Recommended Load Impedance: 10 k ohms or greater
  • Maximum Recording Time: Approximately 12 minutes

  ---

  Controls

  • Pedal switch
  • LEVEL knob

  ---

  Indicators

  • CHECK indicator
  • LOOP indicator

  ---

  Connectors

  • INPUT A (MONO) jack: 1/4-inch phone type
  • INPUT B jack: 1/4-inch phone type
  • OUTPUT A (MONO) jack: 1/4-inch phone type
  • OUTPUT B jack: 1/4-inch phone type
  • STOP/UNDO jack: 1/4-inch TRS phone type
  • DC IN jack

  ---

  Power Supply

  • Alkaline battery: 9 V, 6LR61
  • AC adaptor: PSA series (sold separately)
  • Current Draw: 95 mA
  • Expected battery life under continuous use (these figures will vary depending on actual conditions of use):
    • Alkaline: Approx. 3 hours

  ---

  Accessories

  • Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
  • Alkaline battery: 9 V, 6LR61

  ---

  Options (sold separately)

  • AC adaptor: PSA series
  • Footswitch: FS-5U, FS-6, FS-7

  ---

  Size and Weight

  • Width: 73 mm (2-7/8 inches)
  • Depth: 129 mm (5-1/8 inches)
  • Height: 59 mm (2-3/8 inches)
  • Weight: 430 g (1 lb)

  Add to cart
• Sale!

  wishlist

  Boss RC-5 Loop Station Pedal

  ₹31,785.00 Original price was: ₹31,785.00.₹23,000.00Current price is: ₹23,000.00.

  Standard Features

  • Advanced BOSS looping features in a compact footprint
  • Class-leading sound quality with 32-bit AD/DA and 32-bit floating-point processing
  • Stereo looper engine with 13 hours of recording time
  • LCD with multi-color backlight for viewing loop status and editing parameters
  • Reverse function for infusing loops with interesting textures
  • Seven different drum kits and 57 preset rhythms with A/B variations
  • Support for expanded control via external footswitches, an expression pedal, or MIDI
  • Full MIDI I/O provided with space-saving mini TRS jacks (BMIDI-5-35 adaptor cable available separately)
  • Onboard storage for 99 phrase memories
  • Back up and load WAV loops via USB

  Add to cart
• 

  wishlist

  BOSS RE-2 Space Echo

  ₹31,120.00

  Input/Output Specifications:

  • Nominal Input Level: -20 dBu (standard line-level input).
  • Maximum Input Level: +7 dBu (maximum acceptable signal level before distortion or clipping).
  • Input Impedance: 1 M ohm (high impedance, suitable for instruments like guitars or basses).
  • Nominal Output Level: -20 dBu (standard output level).
  • Maximum Output Level: +7 dBu (maximum acceptable output before clipping).
  • Output Impedance: 1 k ohm (standard for line-level outputs).
  • Recommended Load Impedance: 10 k ohms or greater (for proper signal transfer and compatibility).

  Bypass:

  • Buffered Bypass: Ensures that the signal is preserved and not degraded when the pedal is turned off, allowing for better tone integrity.

  Controls:

  • MODE Knob: Switch between different delay modes or effect types, potentially offering a variety of delay sounds (e.g., analog, digital, etc.).
  • REPEAT RATE Knob: Adjusts the speed or rate of the delay repetitions, affecting how fast the echo repeats occur.
  • WOW & FLUTTER Knob: Likely adds a modulation effect to the delay, simulating the pitch variation found in analog tape delays.
  • INTENSITY Knob: Controls the depth or strength of the delay effect, impacting how pronounced the echo is.
  • TONE Knob: Adjusts the tonal quality of the delayed sound, potentially controlling high or low-frequency emphasis.
  • ECHO Knob: Likely adjusts the level of the delay effect in the overall mix, balancing it with the dry signal.
  • REVERB Knob: Adds reverb to the signal, further enhancing the spatial effect of the sound.
  • CARRYOVER Switch: Likely controls whether the delay continues to sound after the pedal is bypassed, useful for creating smooth transitions in live performance.

  Indicator:

  • CHECK Indicator: Lights up when the battery is low or when the pedal is in need of maintenance, ensuring you don’t run out of power unexpectedly.

  Connectors:

  • INPUT A (MONO) and INPUT B Jack: 1/4-inch phone type jacks for connecting your instrument or audio source.
  • OUTPUT A (MONO) and OUTPUT B Jack: 1/4-inch phone type jacks for sending the processed signal to an amplifier or additional effects.
  • CTL/EXP Jack: 1/4-inch TRS (Tip-Ring-Sleeve) jack for connecting a footswitch or expression pedal (sold separately), allowing for additional control over the effects in real-time.
  • DC IN Jack: For connecting an external AC power adapter (PSA series, sold separately).

  Power Supply:

  • Battery: Alkaline 9V battery (6LR61).
  • AC Adaptor: PSA series (sold separately).
  • Current Draw: 75 mA (moderate current consumption).
  • Expected Battery Life: Approx. 4.5 hours of continuous use with an alkaline battery (actual life may vary depending on usage conditions).

  Accessories:

  • Included: Leaflet with safety and usage information, 9V alkaline battery (6LR61).
  • Optional: AC Adapter (PSA series), Footswitch (FS-5U), Dual Footswitch (FS-6, FS-7), Expression Pedal (FV-500H, FV-500L, EV-30, Roland EV-5).

  Size and Weight:

  • Width: 73 mm (2-7/8 inches).
  • Depth: 129 mm (5-1/8 inches).
  • Height: 59 mm (2-3/8 inches).
  • Weight (with battery): 450 g (1 lb).

  Add to cart
• 

  wishlist

  BOSS RV-6 Reverb

  ₹17,743.00

  Reverb Modes:

  • HALL: Simulates the acoustics of a large hall.
  • PLATE: Emulates the classic sound of a plate reverb.
  • ROOM: Mimics the acoustics of a small room.
  • SPRING: A reverb type associated with spring-based reverb tanks, often found in vintage amps.
  • MODULATE: Adds modulation to the reverb, creating a richer, more dynamic sound.
  • +DELAY: Adds a delay effect combined with the reverb.
  • SHIMMER: Adds an ethereal, high-pitched shimmer to the reverb.
  • DYNAMIC: Adjusts the reverb intensity based on the input signal’s dynamics, offering a more responsive effect.

  Input/Output Specifications:

  • Nominal Input Level: -20 dBu (standard line-level input).
  • Input Impedance: 1 M ohm (ideal for instruments like electric guitars).
  • Nominal Output Level: -20 dBu.
  • Output Impedance: 1 k ohm.
  • Recommended Load Impedance: 10 k ohms or greater (ensures the best interaction with other equipment).

  Controls:

  • Pedal Switch: Turns the effect on or off.
  • E.LEVEL Knob: Controls the level (intensity) of the reverb effect.
  • TONE Knob: Adjusts the high/low frequencies of the reverb sound.
  • TIME Knob: Controls the decay time or how long the reverb lasts.
  • MODE Knob: Selects between the different reverb modes mentioned above.

  Indicators:

  • CHECK Indicator: Serves as an operational status indicator and also shows the battery’s health.

  Connectors:

  • INPUT-A (MONO) Jack: Primary input for a mono signal (likely for instruments like guitars).
  • INPUT-B Jack: Secondary input for stereo input or alternate routing.
  • OUTPUT-A (MONO) Jack: Main output for the processed signal.
  • OUTPUT-B Jack: Secondary output for stereo or alternative routing.
  • EXP Jack: For connecting an expression pedal to control parameters such as reverb depth or time in real-time.
  • AC Adaptor Jack (DC 9V): For connecting an external power supply (sold separately).

  Power Supply:

  • Battery: Alkaline 9V battery (6LR61).
  • AC Adaptor: PSA series (sold separately).
  • Current Draw: 95 mA.
  • Expected Battery Life: Approximately 3 hours (varies with usage).

  Accessories:

  • Included: Safety and information leaflets, Alkaline 9V battery.
  • Optional: AC Adapter (PSA series), Expression Pedal (BOSS FV-500H, FV-500L, Roland EV-5).

  Dimensions and Weight:

  • Width: 73 mm (2-7/8 inches).
  • Depth: 129 mm (5-1/8 inches).
  • Height: 59 mm (2-3/8 inches).
  • Weight (with battery): 450 g (1 lb).

  Add to cart