BOSS RE-2 Space Echo
₹31,120.00
Input/Output Specifications:
- Nominal Input Level: -20 dBu (standard line-level input).
- Maximum Input Level: +7 dBu (maximum acceptable signal level before distortion or clipping).
- Input Impedance: 1 M ohm (high impedance, suitable for instruments like guitars or basses).
- Nominal Output Level: -20 dBu (standard output level).
- Maximum Output Level: +7 dBu (maximum acceptable output before clipping).
- Output Impedance: 1 k ohm (standard for line-level outputs).
- Recommended Load Impedance: 10 k ohms or greater (for proper signal transfer and compatibility).
Bypass:
- Buffered Bypass: Ensures that the signal is preserved and not degraded when the pedal is turned off, allowing for better tone integrity.
Controls:
- MODE Knob: Switch between different delay modes or effect types, potentially offering a variety of delay sounds (e.g., analog, digital, etc.).
- REPEAT RATE Knob: Adjusts the speed or rate of the delay repetitions, affecting how fast the echo repeats occur.
- WOW & FLUTTER Knob: Likely adds a modulation effect to the delay, simulating the pitch variation found in analog tape delays.
- INTENSITY Knob: Controls the depth or strength of the delay effect, impacting how pronounced the echo is.
- TONE Knob: Adjusts the tonal quality of the delayed sound, potentially controlling high or low-frequency emphasis.
- ECHO Knob: Likely adjusts the level of the delay effect in the overall mix, balancing it with the dry signal.
- REVERB Knob: Adds reverb to the signal, further enhancing the spatial effect of the sound.
- CARRYOVER Switch: Likely controls whether the delay continues to sound after the pedal is bypassed, useful for creating smooth transitions in live performance.
Indicator:
- CHECK Indicator: Lights up when the battery is low or when the pedal is in need of maintenance, ensuring you don’t run out of power unexpectedly.
Connectors:
- INPUT A (MONO) and INPUT B Jack: 1/4-inch phone type jacks for connecting your instrument or audio source.
- OUTPUT A (MONO) and OUTPUT B Jack: 1/4-inch phone type jacks for sending the processed signal to an amplifier or additional effects.
- CTL/EXP Jack: 1/4-inch TRS (Tip-Ring-Sleeve) jack for connecting a footswitch or expression pedal (sold separately), allowing for additional control over the effects in real-time.
- DC IN Jack: For connecting an external AC power adapter (PSA series, sold separately).
Power Supply:
- Battery: Alkaline 9V battery (6LR61).
- AC Adaptor: PSA series (sold separately).
- Current Draw: 75 mA (moderate current consumption).
- Expected Battery Life: Approx. 4.5 hours of continuous use with an alkaline battery (actual life may vary depending on usage conditions).
Accessories:
- Included: Leaflet with safety and usage information, 9V alkaline battery (6LR61).
- Optional: AC Adapter (PSA series), Footswitch (FS-5U), Dual Footswitch (FS-6, FS-7), Expression Pedal (FV-500H, FV-500L, EV-30, Roland EV-5).
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (with battery): 450 g (1 lb).
The Authentic Space Echo Experience in a Compact Pedal
Introduced in 1974 and produced for over 14 years, the Roland RE-201 Space Echo stands among the most legendary and sought-after effect units in music history. Known for its distinctive rhythmic echo sounds, warm character, and highly playable sonic quirks, this tape-based classic continues to inspire musicians, producers, and audio mixers over four decades on.
With the RE-2, the authentic sound and behavior of the Space Echo is now available in the famous BOSS compact series for the first time. Backed by intensive R&D and our latest innovations, the RE-2 delivers the coveted magic of the RE-201 in a pedalboard-friendly footprint—realized in flawless detail by the company that designed the original.
Features
- Authentic sound and behavior of the legendary Roland RE-201 Space Echo in a BOSS compact pedal
- Classic multi-head tape echo sound with expanded delay time
- Original three-head configuration and 11 different sound combinations
- Vintage RE-201 spring reverb sound with modern stereo operation
- Wow & Flutter control for introducing varying levels of natural tape modulation
- Twist effect with footswitch control
- Select between the unprocessed analog dry signal or the modeled sound of the original Space Echo preamp
- Tap tempo and carryover functions
- True stereo input and output
- Expandable control via external footswitches or an expression pedal
- BOSS five-year warranty
You must be logged in to post a review.
Related products
-
BOSS Guitar Effects Processor GT-1000CORE
₹73,829.00Add to cartAudio Specifications:
- Sampling Frequency: 96 kHz
- AD/DA Conversion: 32 bits
- Processing: 32-bit floating point
- Effects: 185 types
- Memory: 250 (User) + 250 (Preset)
- Phrase Loop:
- 38 sec. (MONO)
- 19 sec. (STEREO)
- Tuner Internal Detection: +/- 0.1 cent
Input/Output:
- Normal Input Level:
- INPUT L/MONO, R: -10 dBu
- RETURN 1, RETURN 2: -10 dBu
- Maximum Input Level:
- INPUT L/MONO, R: +12 dBu
- RETURN 1, RETURN 2: +12 dBu
- Input Impedance:
- INPUT L/MONO, R: 2 M ohms
- RETURN 1, RETURN 2: 1 M ohm
- Normal Output Level:
- OUTPUT L/PHONES, R/MONO: -10 dBu
- SEND 1, SEND 2: -10 dBu
- Maximum Output Level:
- OUTPUT L/PHONES, R/MONO: +12 dBu
- SEND 1, SEND 2: +12 dBu
- Output Impedance:
- OUTPUT L/PHONES, R/MONO: 44 ohms
- SEND 1, SEND 2: 1 k ohm
- Recommended Load Impedance:
- OUTPUT L/PHONES, R/MONO: 10 k ohms or greater (Phones: 44 ohms or greater)
- SEND 1, SEND 2: 10 k ohms or greater
Controls and Display:
- Buttons:
- DOWN switch, UP switch, CTL 1 switch
- EFFECT button, MENU button, EXIT button, WRITE button, PAGE button
- Knobs:
- 1-5 knobs, SELECT knob, OUTPUT LEVEL knob
- Display:
- Graphic LCD (256 x 80 dots)
- Indicators:
- UP indicator, DOWN indicator, CTL 1 indicator
Connectors:
- Input/Output Connectors:
- INPUT (L/MONO, R), OUTPUT (R/MONO) jacks: 1/4-inch phone type
- OUTPUT (L/PHONES) jack: 1/4-inch TRS phone type
- Control and Expansion:
- CTL 2, 3/EXP 1, CTL 4, 5/EXP 2 jacks: 1/4-inch TRS phone type
- MIDI Connectors:
- MIDI (IN, OUT): Stereo miniature phone type
- USB Port:
- USB COMPUTER port: USB Micro-B type
- Power Input:
- DC IN jack
Power and Size:
- Power Supply: AC adaptor
- Current Draw: 670 mA
- Power Consumption in OFF Mode: 0.0 W
- Size:
- Width: 173 mm (6-13/16 inches)
- Depth: 135 mm (5-3/8 inches)
- Height (including rubber foot): 65 mm (2-9/16 inches)
- Weight: 920 g (2 lbs 1 oz)
Accessories and Options (Sold Separately):
- Footswitches: FS-5U
- Dual Footswitch: FS-6, FS-7
- Expression Pedals: FV-500H, FV-500L, EV-30, Roland EV-5
- TRS/MIDI Connecting Cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535
Additional Notes:
Accessories Included:
-
- AC adaptor
- Owner’s manual
- Leaflet “USING THE UNIT SAFELY”
- Rubber foot x 4
-
Boss RC505 MKII Loop Station
₹94,242.00Original price was: ₹94,242.00.₹65,500.00Current price is: ₹65,500.00.Add to cartStandard Features
- The industry-standard tabletop looper, updated and enhanced
- Class-leading sound quality with 32-bit AD/DA and 32-bit floating-point processing
- Five simultaneous stereo phrase tracks with dedicated controls and independent volume faders
- Input FX and Track FX sections, each with four simultaneous effects and four quick-access banks
- Customizable FX and Track buttons for each phrase track
- Massive onboard effects selection with 49 Input FX types and 53 Track FX types, including new Harmony, Electric FX, and many others
- New ultra-durable faders with longer throw for more precise adjustment
- Newly added Mark Back function provides enhanced undo/redo flexibility while performing
- Two XLR mic inputs with phantom power, two stereo line input pairs, and three stereo line output pairs
- 99 memories, each containing five phrase tracks, custom effects and playback settings, control assignments, and more
- Synchronize your loops with over 200 onboard rhythm patterns and 16 drum kits
- Deep MIDI control support
- Two external control jacks, each with support for up to two footswitches or an expression pedal
- USB for data backup, phrase import/export with BOSS Tone Studio, and pattern import with the RC Rhythm Converter
-
BOSS KATANA-HEAD MKII Guitar Amplifier
₹43,883.00Add to cartSpecifications:
- Rated Power Output:
- 30 W (Using internal speaker)
- 100 W (Using external speaker)
- Nominal Input Level:
- INPUT: -10 dBu (1 M ohm)
- AUX IN: -10 dBu (20 k ohms)
- RETURN IN: -10 dBu (100 k ohm)
- Speaker:
- 12 cm (5 inches) x 1
Controls:
- Power Controls:
- POWER switch
- MASTER knob
- PRESENCE knob
- POWER CONTROL switch (STANDBY, 0.5 W, 50 W, 100 W)
- CAB RESONANCE switch (VINTAGE, MODERN, DEEP)
- Amplifier Controls:
- VARIATION button
- AMP TYPE knob (ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN)
- GAIN knob
- VOLUME knob
- Equalizer Controls:
- BASS knob
- MIDDLE knob
- TREBLE knob
- Multi Effect Controls:
- BOOSTER button
- MOD button
- FX button
- DELAY button
- REVERB button
- TAP button
- BOOSTER knob
- MOD knob
- FX knob
- DELAY knob
- REVERB knob
- Tone Setting Controls:
- CH1 button
- CH2 button
- CH3 button
- CH4 button
- PANEL button
- Stereo Expand:
- STEREO EXPAND switch
Indicators:
- VARIATION
- ACOUSTIC
- CLEAN
- CRUNCH
- LEAD
- BROWN
- BOOSTER
- MOD
- FX
- DELAY
- REVERB
- TAP
- CH1
- CH2
- CH3
- CH4
- PANEL
Connectors:
- Input/Output Connectors:
- INPUT jack: 1/4-inch phone type
- POWER AMP IN jack: 1/4-inch phone type
- LINE OUT jack: 1/4-inch phone type
- SEND jack: 1/4-inch phone type
- RETURN jack: 1/4-inch phone type
- SPEAKER OUT jack: 1/4-inch phone type (Minimum 8 ohm)
- REC OUT/PHONES jack: Stereo 1/4-inch phone type
- EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
- GA-FC jack: 1/4-inch TRS phone type
- AUX IN jack: Stereo miniature phone type
- USB port: USB B type
- MIDI IN connector
- AC IN jack
Power:
- Power Consumption: 77 W
Accessories:
- Included:
- Owner’s manual
- Power cord
- GA-FC sticker
- Options (Sold Separately):
- Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
- Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
- GA FOOT CONTROLLER (GA-FC, GA-FC EX)
Size and Weight:
- Dimensions:
- Width: 470 mm (18-9/16 inches)
- Depth: 228 mm (9 inches)
- Height: 215 mm (8-1/2 inches)
- Weight: 8.8 kg (19 lbs 7 oz)
- Rated Power Output:
-
BOSS DD-8 DIGITAL DELAY EFFECTS PEDAL
₹17,673.00Original price was: ₹17,673.00.₹16,000.00Current price is: ₹16,000.00.Add to cartSPECIFICATIONEffect Types: Transpose, Flanger, Phaser, Pan, Tremolo, Slicer, Bend, Chorus, Robot, Female, Male, Gt->Bass, Filter, Delay, Lo-Fi, Distortion
Rhythm Types: 83
USB Interface
- Hi-Speed USB (USB Mass Storage Class)
- Hi-Speed USB (USB-AUDIO)
Displays
- 7 segments, 2 characters (LED)
- 16 characters, 2 lines (backlit LCD)
Nominal Input Level
- INPUT MIC: -50 dBu (variable)
- INPUT INST: -10 dBu (variable)
- INPUT AUX: -20 dBu (variable)
Input Impedance
- INPUT MIC: 4 k ohms
- INPUT INST: 1 M ohm
- INPUT AUX: 47 k ohms
Nominal Output Level
- MAIN OUTPUT: -10 dBu
- SUB OUTPUT: -10 dBu
Output Impedance: 2 k ohms
Recommended Load Impedance: 10 k ohms or greater
Pedals
- TRACK 1 REC/DUB/PLAY pedal
- TRACK 2 REC/DUB/PLAY pedal
- TRACK 3 REC/DUB/PLAY pedal
- TRACK 1 STOP pedal
- TRACK 2 STOP pedal
- TRACK 3 STOP pedal
- ALL START/STOP pedal
- LOOP FX pedal
- EXP 1 pedal
Sliders
- TRACK 1 slider
- TRACK 2 slider
- TRACK 3 slider
Knobs
- MASTER LEVEL knob
- RHYTHM LEVEL knob
- AUX knob
- INST knob
- MIC knob
Connectors
- INPUT MIC jack: XLR type (balanced/phantom power: DC 48 V, 10 mA)
- INPUT INST jacks (L/MONO, R): 1/4″ phone type
- INPUT AUX jack: Stereo miniature phone type
- MAIN OUTPUT jacks (L/MONO, R): 1/4″ phone type
- SUB OUTPUT jacks (L/MONO, R): 1/4″ phone type
- PHONES jack: Stereo 1/4″ phone type
- CTL 1,2 / EXP 2 jack: 1/4″ TRS phone type
- CTL 3,4 / EXP 3 jack: 1/4″ TRS phone type
- USB connector
- MIDI connectors (IN/OUT/THRU) (*)
- DC IN jack (DC 9 V)
- (*) MIDI synchronization is possible with other RC-300 devices or when RC-300 is set to master.
Power Supply: DC 9 V (AC adaptor)
Reviews
There are no reviews yet.