Mackie Thump215 XT
₹76,818.00 Original price was: ₹76,818.00.₹46,000.00Current price is: ₹46,000.00.
Tech Specs
- Powered:Yes
- Channels:2-channel mixer
- LF Driver Size:15″ high-performance woofer
- HF Driver Size:1″ compression driver
- Total Power:1400W
- Inputs:2 x XLR-1/4″ combo, 1 x 1/8″ TRS
- Outputs:1 x 1/4″
- Bluetooth:Yes
- Wireless:Bluetooth
- Frequency Response:40Hz-20kHz
- Maximum Peak SPL:129dB SPL
- Software:Thump Connect 2 App
- Mounting Options:Pole Mount, Floor Wedge, M10 flypoints
- Power Source:Standard IEC AC cable
- Height:27″
- Width:17.4″
- Depth:14″
- Weight:35.1 lbs.
A New Spin on the Classic Thump Formula
Mackie’s next generation of Thump loudspeakers is redesigned from the ground up to provide you with enhanced power and utility, all at a wallet-friendly price! The Thump215XT Enhanced loudspeaker’s ultra-efficient 1,400-watt class-D amplifier pushes plenty of air through the high-performance 15-inch woofer — a design that live sound pros find is more than capable of handling most small- to medium-sized venues. Next, the 1-inch compression driver ensures that your sound is evenly dispersed, allowing the entire crowd to hear your music with crystal-clear quality. There’s even a built-in feedback eliminator to keep everything noise- and rumble-free! Plus, the Thump215XT is loaded with flexible I/O power, boasting a versatile 2-channel design that can be set up for music ducking, allowing this loudspeaker to extend its utility outside of standard musical applications into the world of public address and education. Finally, the Thump215XT’s Bluetooth compatibility gives you access to effortless music streaming, speaker linking, and enhanced parameter control via the Thump Connect 2 mobile app.
Four voicing modes and Bluetooth compatibility
No matter what live sound environment you’re in, the Thump 215XT’s four application-specific voicing modes have you covered! Music, Live, Club, and Monitor modes optimize your system to excel in any type of venue, and there’s even an Indoor/Outdoor mode setting if you’re looking to take your band’s sound to an outside gig. If you’re after even greater sonic control, then the Thump215XT’s Bluetooth connectivity allows you to stream, link speakers, and access additional sound-shaping features like system EQ, levels, mutes, and much more via the Thump Connect 2 app.
Ultra-efficient class-D power
The Mackie Thump215XT’s ultra-efficient class-D amplification kicks out a powerful sound that defies this loudspeaker’s modest size! A 15-inch woofer dishes out plenty of low-end punch, and the 1-inch compression driver ensures that your sound is evenly dispersed across the entire venue. Lastly, Mackie’s built-in feedback eliminator all but eradicates unwanted speaker screech and rumble, maximizing your sonic potential and ensuring that your show runs smooth from start to finish.
Portable design for easy setup and transport
Weighing in at 35-pounds, the Thump215XT is compact and lightweight, making it easy to transport. The Thump215XT’s small and portable size will ensure that you won’t need a road crew to mount it on a pole or pack it into your car. What’s more, the Thump215XT is housed in a super-tough road-ready enclosure, so don’t think that its light weight makes it fragile!
Mackie Thump215XT Enhanced 1,400-watt Powered Loudspeaker Features:
- 1,400W of class-D amplification is more than loud enough for most small- to medium-sized venues
- 15-inch woofer and 1-inch compression driver deliver a full-range sound with plenty of low end
- Flexible I/O, versatile 2-channel design, and a through output for a wide range of configurations
- Music ducking mode is ideal for public address and education settings
- Angled design is perfect for floor monitoring, but can also be mounted on a standard pole setup
- 4-application specific voicing modes with Indoor/Outdoor modes to excel in any situation
- Bluetooth connectivity allows for music streaming and effortless linking of speakers
- Thump Connect 2 App gives you access to enhanced sound-shaping and utility controls
- Lightweight 35-pound design offers effortless portability
- Signature Mackie durability to withstand the rigors of the road
- Built-in feedback eliminator reduces unwanted screech and rumble
You must be logged in to post a review.
Related products
-
Yamaha DHR10 Loudspeaker
₹54,500.00Original price was: ₹54,500.00.₹45,000.00Current price is: ₹45,000.00.Add to cartMore Information DHR10 Speaker type 2-way, Bi-amped Powered Speaker, Bass-reflex Frequency range (-10dB) 52 Hz – 20 kHz Coverage area H90゚ x V60゚ (Rotatable) Crossover 1.9 kHz: FIR-X tuning™ (linear phase FIR filter) Maximum Output Level (Measured peak, IEC noise@1m) 128 dB SPL Components LF Diameter: 10″ cone, Voice Coil: 2″, Magnet: Ferrite HF Diaphragm: 1.4″, Type: 1″ throat compression driver, Magnet: Ferrite Amplifier class Class-D Power rating Dynamic 700 W (LF: 500 W, HF: 200 W) *1 Continuous 325 W (LF: 260 W, HF: 65 W) Cooling Fan cooling, 4 speeds Power consumption 60 W (1/8power), 18 W (Idle) Power requirements 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz A/D D/A Converters 24 bit 48 kHz Sampling Processors HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) Cabinet material Plywood Finish Durable Polyurea Painting, Black Handle Top x1 Pole socket Φ35 mm x1 (Bottom) Rigging Top x 2, Rear x 1 (Fit for M10 x 30 – 50 mm Eyebolts) Floor Monitor Angle – Dimensions W 305 mm (12.0″) H 494 mm (19.5″) (with rubber feet) D 300 mm (11.8″) Net weight 15.0 kg (33.1 lbs) Options U-bracket: UB-DXRDHR10 -
Yamaha STAGEPAS 400BT Portable Bluetooth Speaker
₹80,300.00Add to cartEquipped with a Bluetooth input for wireless audio streaming from smartphones or tablets, the STAGEPAS-BT models let you seamlessly play backing tracks for gigs, or set the tone of parties, conferences, or events with the audio playback of your choice.
- Powered mixer with 2 passive speakers
- Mixing channels – 8, Input channel functions, Feedback suppressor, 1-Knob Master EQ„,4 mono mic / line + 4 mono / 2 stereo line
- SPEAKERS OUT (L, R), MONITOR OUT (L/MONO, R), SUBWOOFER OUT (MONO) with auto HPF
- 400W (200 W + 200 W) (Dynamic), 360W (180W + 180W) (Continuous)
- Two-way bass-relfex speakersTwo-way bass-relfex speakers Frequency range (-10dB) 55 Hz – 20 kHz LF 8″ (20 cm) cone HF 1″ (2.54 cm) voice coil compression driver
- Power requirements 100 V – 240 V 50 Hz/60 Hz Power consumption 30 W (Idle), 70 W (1/8 Power)
-
Yamaha DBR15 Powered Loudspeaker
₹76,700.00Original price was: ₹76,700.00.₹55,000.00Current price is: ₹55,000.00.Add to cartDBR15
General specifications Speaker type 2-way, Bi-amp powered speaker, Bass-reflex type Frequency range (-10dB) 50Hz – 20kHz Nominal coverage H 90° V 60° Components LF Diameter:15″ cone, Voice Coil:2.5″, Magnet:Ferrite HF Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite Crossover 2.1kHz: FIR-X tuning™ (linear phase FIR filter) Output power Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) Maximum output level (1m; on axis) 132dB SPL I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) Processors D-CONTOUR: FOH/MAIN, MONITOR, OFF Heat dissipation Fan cooling, 4 speeds Power requirements 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz Power consumption 74W(1/8 Power Consumption), 18W(Idle) Cabinet material Plastic Finish Black Handle Side x 2 Flying and mounting hardware Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts) Pole socket 35mm (Bottom x 1) Dimensions W 455mm (17.9″) H 700mm (27.6″) D 378mm (14.9″) Net weight 19.3 kg (42.6 lbs) Accessories BBS251, BCS251, BWS251-300, BWS251-400 (Optional Speaker bracket) -
Alto Professional TS412
₹89,980.00Original price was: ₹89,980.00.₹47,250.00Current price is: ₹47,250.00.Add to cartKey Features
- 2500 W peak (1600 LF + 900 HF) 1250 W continuous RMS (800 LF + 450 HF)
- FREE Alto App (iOS/Android) for remote configuration and control
- Bluetooth® audio streaming direct from device
- On-board DSP with 4 Speaker Use modes (inc. Custom EQ via App)
- True Wireless Stereo speaker linking via Bluetooth®
- Integrated 3-channel mixer with dual XLR ¼-inch combo inputs, mic/line switches and independent level controls
- XLR Mix output, Speaker Use, and Sub Size Controls
- 12” driver, 2.5” (63 mm) high-temperature voice coil
- 1” exit ceramic driver with 1.4” (35 mm) coil
- Lightweight enclosure for easy transport, set up and installation
- Versatile design – pole-mountable, wedge monitor or flown application with integral M10 suspension points
- Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
- Designed and tuned in the USA
Reviews
There are no reviews yet.