Product Showcase
PreSonus Eris Studio 4 (Single)
Original price was: ₹17,990.00.₹15,990.00Current price is: ₹15,990.00.
Key Features:
• 4.5-inch woven composite low-frequency driver
• 1-inch, ultra-low mass, silk-dome, high frequency driver
• 100 ̊ x 60 ̊ EBM waveguide provides a wide sweet spot
• Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
• 50W, Class AB dual amplification
• 55 Hz to 20 kHz frequency response
• 100 dB Peak SPL (@ 1 meter)
• Acoustic Tuning Controls
The Eris Studio 4 sets a new standard for compact studio monitors. With its surprising amount of low-end and a wide, well-controlled sweet spot, you can enjoy studio-grade monitoring in even the smallest of spaces. The custom-designed EBM (Elliptical Boundary Modeled) waveguide provides superior high-frequency response and wider 100-degree horizontal dispersion to create a broad sweet spot. Narrow vertical dispersion reduces reflections from your desk and a silk-dome tweeter ensures snappy, accurate transient reproduction.
The woven composite low-frequency driver offers Eris’ signature tight, clear bass with plenty of punch. The ported enclosure maximizes bass response and allows the Eris Studio 4 to reach down to a highly respectable 55 Hz – without a subwoofer!
Technical specifications
|
Frequency Response |
55 Hz to 20 kHz |
|
Peak SPL |
100 dB (@ 1M) |
|
LF Amplifier Power |
25W, Class AB |
|
HF Amplifier Power |
25W, Class AB |
|
LF Driver |
4.5-inch woven composite |
|
HF Driver |
1-inch, silk-dome |
|
Inputs (1 each) |
Balanced XLR Balanced 1⁄4-inch TRS Unbalanced RCA |
|
Controls |
Volume |
|
Dims (H x W x D) |
10” x 7.01” x 7.28” |
|
Weight |
8.82 lbs (4 kg) |
You must be logged in to post a review.
Related products
-
Kali Audio IN-5 (Pair)
Original price was: ₹99,500.00.₹89,990.00Current price is: ₹89,990.00.Add to cartFeatures:
- 5-inch powered studio monitor with coaxial 1-inch textile-dome tweeter and 4-inch optimized-profile midrange driver
- Tri-amped design with integrated Class D power amp
- Ruler-flat frequency response — there’s nothing hyped about this speaker
- Exhibits negligible levels of distortion — a full 6dB lower than its nearest competitor
- Boasts 20dB of headroom while playing continuously at 85dB
- Large magnets and voice coils produce super-accurate low-end response and impressive low-frequency extension
- Coaxial design exhibits superb directivity — better than any non-coaxial design —covering your entire room uniformly
- Low-noise port tube yields clean, punchy bass with zero chuffing
- Boundary EQ allows you to tailor the speaker to any environment
- LF/HF trims for fine-tuning the speaker’s response
- Balanced XLR and TRS inputs, and an unbalanced RCA input
-
Focal Trio6 ST6 (each)
Original price was: ₹468,790.00.₹445,000.00Current price is: ₹445,000.00.Read morePerformance Frequency response 3-way mode 35Hz – 40kHz (+/- 3dB) 2-way mode (Focus) 90Hz – 20kHz (+/- 3dB) Maximum SPL 3-way mode 115dB SPL (peak at 1m) 2-way mode (Focus) 105dB SPL (peak at 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass
Midrange
Treble200W, class G
150W, class G
100W, class ABPower supply Main voltage Wiring 230V (class T fuse 1.6A fuse rating) – 115V (class T fuse 3.5 A fuse rating) Detachable IEC power cable Indicators and controls Rear panel Input sensitivity selector (+4dBu/-10dBV)
Low frequency shelving (+/- 3dB from 35 to 250Hz)
High frequency shelving (+/- 3dB from 4.5 to 40kHz)
EQ low-mid frequencies (+/- 3dB at 160Hz, Q factor = 1)
FOCUS input / FOCUS outputLED Focus mode on, audio clipping and protection indicated by LED on front panel Transducers Subwoofer 8W64701 8′ Focal driver with W composite sandwich cone Woofer 5W04701 5′ Focal driver with W composite sandwich cone Tweeter TB872, 1′ Focal pure Beryllium inverted dome tweeter Cabinet Structure 22mm (0.86′) reinforced panels Finish Dark Red natural Burr-ash veneering side panels, Black body Dimensions including 4 rubber feet (HxWxD) 201/2′ x 1015/16′ x 143/16′ (520 x 278 x 360mm) Weight 44 lbs (20 kg) -
Focal Shape 50 (each)
Original price was: ₹95,685.00.₹90,000.00Current price is: ₹90,000.00.Add to cartSystem SHAPE 50 Frequency response (+/-3dB) 50Hz – 35kHz Maximum SPL (musical signal) 106dB SPL (peak @ 1m) Electronic section Inputs/ Impedance Type XLR: balanced 10kOhms Connectors RCA: unbalanced 10kOhms with sensitivity compensation Midrange and low frequency amplifier 60W, class AB High frequency amplifier 25W, class AB Automatic standby Standby on After approximately 30 minutes with no signal Standby off Signal detection > 3 mV Electrical supply Voltages 220-240V (T800mAL / 250V fuse) or 100-120V (T1.6AL / 250V fuse) Connection IEC plug and detachable power cord Settings High pass filter Adjustable Full range 45/60/90Hz Bass(0 – 250Hz) Adjustable, +/-6dB Midrange/bass(160Hz, Q=1) Adjustable, +/-3dB SHAPE 50 Wall mount K&M® Fixing kit 24471 + K&M® 24359 adapter Ceiling mount K&M® Fixing kit 24496 + K&M® 24359 adapter Table stand / microphone stand K&M® Fixing kit 232 Settings High (4.5 – 35kHz) Adjustable, +/-3dB Power On/Power Of On/off switch on rear panel Standby consumption < 0.5W Displays and controls LED for power on/off and standby Transducers Woofer 5′ (13cm) Flax Cone Tweeter 1′ (25mm) ‘M’ profile Aluminum-Magnesium Cabinet Construction 0.6′ (15mm) MDF Finish Vinyl, real walnut and black painting Dimensions with four rubber feet (HxWxD) 12.3 x 7.5 x 9.5′ (312 x 191 x 242mm) Weight 20.7lb (6.5kg) -
Dynaudio LYD 7 (Black)
Original price was: ₹103,000.00.₹92,990.00Current price is: ₹92,990.00.Add to cart- Nearfield Monitor with 7″ Woofer
- Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
- Bass extension settings to extend or curtail the low end frequency response
- Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
- Sound balance to influence the overall response of the speaker
- Handmade in Denmark
Reviews
There are no reviews yet.