Focal Twin6 be (each)

Performance

Frequency response

40Hz – 40kHz

Maximum SPL

115dB SPL (peak @ 1m)

Electronic section

Inputs

Type / Impedance

Connector

Sensitivity

Electronically balanced / 10 kOhms

XLR

Adjustable, +4dBu or -10dBV

Bass
Bass – Midrange
Treble

150W rms, BASH® technology
150W rms, BASH® technology
100W rms, class AB

Power supply

Local supply

Connection

230V (2A fuse)
115V (4A fuse)

IEC inlet and detachable power cord

User controls and indicators

Input sensitivity selector
Midrange driver selector (right/left)
Adjustable tweeter and woofer levels by potentiometers
On/off switch, voltage selector

Light indicator

Power On LED

Transducers

Woofer

2 x 6W4370B, 61/2′ (16.5cm) Focal “W” composite sandwich cone drivers

High frequency

TB871, Focal Beryllium inverted dome tweeter

Shielding

Integral through cancellation magnets / cans or by magnet design

Cabinetwork

Construction

71/2′ (19mm) MDF panels

Finish

Dark red natural veneering side panels, black body

Dimensions (HxLxD)

913/16 x 1911/16 x 133/8′(250mm x 500mm x 340mm)

Weight

30.8lb (14kg)

Spread the love

Three-way monitor

The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation. The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency.

Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5″ woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate.

The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

Beryllium inverted dome tweeter

The inverted dome tweeter is a hallmark of Focal. As a result of more than twenty years of development into a tweeter that could produce a high output, but without requiring high energy input and without increasing directivity. The introduction of the pure Beryllium dome, capable of covering 5 full octaves from 1,000 to 40,000Hz constitutes a new decisive advance regarding new audio formats. This tweeter capacity to reproduce high frequencies with unmatched speed and transparency. At first the pure Beryllium tweeter was only available on the very high-end digital speakers of the Focal Professional lines (SM8 & SM11), but is now featured on the new SM6 series, allowing an unprecedented price/performance ratio.

The “W” cone

Focal has been developing the technologies of composite sandwich cones for more than 15 years. The “”W”” process (Glass/Foam/Glass), used on the SM11, SM8 and SM6 lines, provides a true optimiza a true optimization of the frequency response by fine tuning of mass, rigidity and damping parameters. The balance between these 3 fundamental and often contradictory parameters is at the base of the outstanding sound neutrality of our speakers.

A custom designed amplification stage

Designing an amp to be integrated inside a speaker requires a very different set of rules than for a traditional amp. Speaker size and cooling concerns are often in contradiction with the high quality and high power requirements of a sonically transparent speaker. Our engineers used the BASH® technology to develop the bass/medium amplification circuit for the SM6 professional line of speakers. This was the only way to exploit the best of class AB style circuits (for exceptional quality) with a class D type yield, which is crucial when housing a 150W RMS circuit in such a small space (300W RMS for the Twin 6 and 350W RMS for the Sub6). A pure class AB circuit is sufficient to power the -less energy demanding- high frequency tweeter, allowing for an extremely wide bandwidth and exceptional accuracy.

Reviews

There are no reviews yet.

Be the first to review “Focal Twin6 be (each)”

You must be logged in to post a review.

Performance
Frequency response	3-way mode	30Hz – 40kHz (+/- 3dB)
	2-way mode (Focus)	90Hz – 20kHz (+/- 3dB)
Maximum SPL	3-way mode	118dB (peak @ 1m)
	2-way mode (Focus)	105dB (peak @ 1m)
Electronics
Inputs	Type/Impedance Connectors Sensitivity	Electronically balanced / 10KOhms XLR Adaptable, +4 dBu or -10 dBv
Bass Midrange Treble		300W, class G 150W, class G 100W, class AB
Power supply	Local supply Wiring	230V (1.6A T fuse) – 115V (3.5A T fuse) Connection Detachable IEC inlet power cord
indicators and controls	Rear panel	Input sensitivity selector (+4dBu/-10dBV) Low frequency shelving (+/- 3dB from 35 to 250Hz) High frequency shelving (+/- 3dB from 4.5 to 40kHz) Low-mid EQ frequencies (+/- 3dB to 160Hz, Q factor = 1) FOCUS input / FOCUS output
Auto standby		Auto standby switch on the back of the loudspeaker: enable / disable switch
LED		Focus power on, clipping and default LED on front panel
Transducers
Subwoofer		10W96701D Focal 913/16′ (25cm) speaker driver with ‘W’ composite sandwich cone
Médium		5W04701 Focal 51/8′ (13cm) speaker driver with ‘W’ composite sandwich cone
Tweeter		TB872 Focal 1′ pure Beryllium inverted dome tweeter
Cabinet
Construction		13/16 and 13/16′ (21mm and 30mm) panels with internal braces
Finish		Natural veneering side panels Dark red burr ash, black body
Dimensions with four rubber feet (HxDxW)		25′ x 139/16′ x 173/4′ (635 x 345 x 450mm)
Weight		82.2lbs (37.3kg)

Cart

Cart

Focal Twin6 be (each)

Reviews

Product Showcase

Cart

Cart

Cart

Focal Twin6 be (each)

Reviews

Related products

Dynaudio LYD 5 (White/Black)

Focal Alpha 65 Evo (each)

Focal Trio11 Be (each)

Focal Solo6 Be (each)

Product Showcase

Cart