Focal Shape 65 (each)

System

SHAPE 65

Frequency response (+/-3dB)

40Hz – 35kHz

Maximum SPL (musical signal)

109dB SPL (peak @ 1m)

Electronic section

Inputs/ Impedance

Type	XLR: balanced 10kOhms
Connectors	RCA: unbalanced 10kOhms with sensitivity compensation

Midrange and low frequency amplifier

80W, class AB

High frequency amplifier

25W, class AB

Automatic standby

Standby on	After approximately 30 minutes with no signal
Standby off	Signal detection > 3 mV

Electrical supply

Voltages	220-240V (T1AL / 250V fuse) or 100-120V (T2AL / 250V fuse)
Connection	IEC plug and detachable power cord

Settings

High pass filter	Adjustable Full range 45/60/90Hz
Bass(0 – 250Hz)	Adjustable, +/-6dB
Midrange/bass(160Hz, Q=1)	Adjustable, +/-3dB

	SHAPE 65
Wall mount	K&M® Fixing kit 24471 + K&M® 24357 adapter
Ceiling mount	K&M® Fixing kit 24496 + K&M® 24359 adapter

Settings

High (4.5 – 35kHz)

Adjustable, +/-3dB

Power On/Power Of

Settings

High (4.5 – 35kHz)	Adjustable, +/-3dB
Power On/Power Of	On/off switch on rear panel

Standby consumption< 0.5W Displays and controlsLED for power on/off and standbyTransducers Woofer6.5′ (16,5cm) Flax ConeTweeter 1′ (25mm) ‘M’ profile Aluminum-MagnesiumCabinet Construction0.6′ (15mm) MDF FinishVinyl, real walnut and black paintingDimensions with four rubber feet (HxWxD) 14 x 8.6 x 11.2′ (355 x 218 x 285mm)Weight 28.2lb (8.5kg)On/off switch on rear panel

Spread the love

The reference of the line

Shape 65 is the reference of the Shape line. Although it’s dedicated to nearfield monitoring, this monitor enables extraordinary monitoring quality, in the lowest to the highest frequencies. Simply a must, this monitor will express its full potential from a listening distance of three feet away (1 metre).

The three monitors are all made in France and integrate five innovations to maximise acoustic transparency. Designed to meet the needs of nearfield monitoring, Shape monitors combine an ingenuous design and numerous settings optimised for the acoustics of small listening rooms.

These innovations provide remarkable acoustic transparency. These new work tools distinguish themselves through the wide and extremely precise stereo image. The bass register is articulated and controlled. The lower mid-range and mid-range benefit from extreme neutrality, and without any masking effects, making equalisation of these essential registers much easier. Finally, the new tweeter is what’s at the source of the very high definition. It efficiently reveals any hissing, and it’s also very precise in the very high end.

Tweeter with very low directivity for a flexible listening position
Designed without a port, but with a double passive radiator, allowing it to be placed near a wall.
Numerous settings for optimal integration
Accurate control, even in the very high end
Flax sandwich cone: controlled and well defined bass, natural and detailed lower mid-range and upper mid-range ranges.
Mounting mechanisms present on the back and underneath the loudspeaker: for installing on a table stand, a microphone stand, the ceiling or a wall (mounting accessories not supplied).

M- Shapes Inverted Dome Tweeter

Focal is evolving its famous aluminum-magnesium inverted dome tweeter via a new “M” shaped and a Poron® suspension.

Flax Sandwich Cone

Recent technologies has proven to be a considerable improvement, in terms of weight rigidity and damping.

N.I.C

The magnetic field is very difficult to control in order to avoid distortion. Focal’s research enabled us to come up with an extremely stable magnetic circuit: Neutral Inductance Circuit technology.

TMD Surround

This technology provides a linear frequency response curve between 1 and 2kHz, while significantly reducing distortion in the same range. The mid-range register benefits from remarkable neutrality, and it contributes to the greatest precision of the the overall stereo image.