Name: Yamaha DHR10 Loudspeaker
SKU: 4419
Price: 45000.00 INR
Availability: InStock

Yamaha DHR10 Loudspeaker

More Information

DHR10
Speaker type		2-way, Bi-amped Powered Speaker, Bass-reflex
Frequency range (-10dB)		52 Hz – 20 kHz
Coverage area		H90ﾟ x V60ﾟ (Rotatable)
Crossover		1.9 kHz: FIR-X tuning™ (linear phase FIR filter)
Maximum Output Level (Measured peak, IEC noise@1m)		128 dB SPL
Components	LF	Diameter: 10″ cone, Voice Coil: 2″, Magnet: Ferrite
Components	HF	Diaphragm: 1.4″, Type: 1″ throat compression driver, Magnet: Ferrite
Amplifier class		Class-D
Power rating	Dynamic	700 W (LF: 500 W, HF: 200 W) *1
Power rating	Continuous	325 W (LF: 260 W, HF: 65 W)
Cooling		Fan cooling, 4 speeds
Power consumption		60 W (1/8power), 18 W (Idle)
Power requirements		100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz
A/D D/A Converters		24 bit 48 kHz Sampling
Processors		HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
I/O connectors		INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Cabinet material		Plywood
Finish		Durable Polyurea Painting, Black
Handle		Top x1
Pole socket		Φ35 mm x1 (Bottom)
Rigging		Top x 2, Rear x 1 (Fit for M10 x 30 – 50 mm Eyebolts)
Floor Monitor Angle		–
Dimensions	W	305 mm (12.0″)
	H	494 mm (19.5″) (with rubber feet)
	D	300 mm (11.8″)
Net weight		15.0 kg (33.1 lbs)
Options		U-bracket: UB-DXRDHR10

Featuring a plywood cabinet that delivers a clear sound with minimal vibration.
Plywood enclosure with a polyurea coating for a robust, scratch resistant surface.
Compact appearance thanks to a 10-inch LF driver that provides excellent low frequency response.
Can be installed in a horizontal or vertical configuration with a rotatable HF horn offering the flexibility needed for installation in a wide range of environments.
Optional UB-DXRDHR10 U-bracket allows both for vertical or horizontal use.
A pole socket for use on a stand.
Rigging points for use with eye bolts. Propitiatory FIR-X„ tuning, provides FIR filtering and corrective EQ, minimizing phase distortion

Reviews

There are no reviews yet.

Be the first to review “Yamaha DHR10 Loudspeaker”

You must be logged in to post a review.

System
System Type	Portable Powered 2.1 System with Two Line Array Tops and One Subwoofer
Maximum SPL Output	122 dB peak system output (pink noise)
Frequency Response (-10dB)	45Hz – 18kHz
Speakers
LF Driver	2 x 6.5″ (165mm) woofer in BANDPASS configuration
HF Driver	8 x 2.75″ (70mm) neodymium drivers (4 for each TOP)
Coverage Pattern	100° x 50°
Amplifier
Type	Class D with SMPS
System Power Rating	300 Watts LF, 2×150 Watts HF Continuous, 1200W Peak
Channels	2 MIC/LINE selectable inputs
Connectors	2 x COMBO (INPUTS), 2 x XLR-M (LINK), 2 x SPEAKON (POWER OUTPUTS)
Controls	1 x LCD with Data Encoder
Processing	24bit / 48KHz CORE DSP, 2-band EQ Selectable CONFIGURATION and EQ PRESETS, Digital Limiting
Wireless Audio	Bluetooth built-in receiver
General Specifications
Cabinet Material	Plywood
Finishing	High-strenght polyurethane black paint
Grille	Powder coated perforated steel
Handles	2 x sides (SUB)
Pole Socket	1 x top M20 (SUB), 1 x bottom 35mm (TOP)
Included Accessories	M20 / 35mm telescopic pole, 4-wire SPEAKON/SPEAKON cable, 2 x SAT cover
AC input	230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
Dimensions (W x H x D)	TOP: 100x358x100 mm, SUB: 420x480x460 mm
Weight	TOP: 1.5 kg (3.3 lbs), SUB: 22 kg (48.5 lbs), SYSTEM: 25 kg (55.1 lbs)

Yamaha DHR10 Loudspeaker