Product Showcase
AKG C411 L | High-performance miniature condenser vibration pickup
Original price was: ₹15,647.00.₹12,000.00Current price is: ₹12,000.00.
General Specifications
- Type
- Pre-polarized condenser transducer
- Polar Pattern
- Figure of eight
- Audio frequency bandwidth
- 10 – 18000 Hz
- Sensitivity
- 2 mV/Pa
- Electrical impedance
- 200 Ohms
- Recommended load impedance
- 1000 Ohms
- Max. SPL for 1%/3% THD
- 96 dB / 103 dB
- Current consumption
- approx. 2.2 mA
Dimensions
- Length
- 9.7 mm
- Width
- 14.2 mm
- Height
- 26.7 mm
- Net Weight
- 225 g (8 oz.)
- Cable length
- 3 m (10 ft.)
Design
- Body
- plastic
- Finish
- matte black
Audio Output
- Type
- MPAV standard XLR connector
- Gender
- Female
- Contacts
- 3-pin
Powering Interface
- Voltage
- 9 to 52 V
- Current
- 2 mA
Feel the vibe
The C411 is a miniature vibration pickup for acoustic guitar, mandolin, violin and most other string instruments. Its integrated condenser capsule will reproduce the sound of the instrument clearly and without coloration. The C411 ultralight pickup (18g/0.6oz) can be easily attached on or near the bridge with the included nonmarking, solvent-free adhesive pad without changing the balance of the instrument. The C411 is available in two versions. The C411 PP features a MPAV standard XLR connector while the C411 L provides a professional three-pin mini XLR connector that fits the body-pack transmitters of all AKG wireless microphone systems.
You must be logged in to post a review.
Related products
-
Sontronics Drum Pack
Original price was: ₹85,615.00.₹83,000.00Current price is: ₹83,000.00.Add to cart-
Polar pattern (all mics): Cardioid
-
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
-
Filter (STC-10 only): Linear/75Hz
-
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
-
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
-
8mV/Pa -42dB ±2dB (DM-1S & 1T),
-
11mV/Pa -39dB ±2dB (STC-10)
-
Impedance (all mics): ≤200 Ohms
-
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
-
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
-
Power sources (all mics): 48V ±4V phantom power required
-
Connector (all mics): 3-pin XLR
-
Dimensions: 144 x 72 x 72mm (DM-1B),
-
91 x 22 x 22mm (DM-1S & 1T),
-
150 x 21 x 21mm (STC-10)
-
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
-
-
Sontronics DELTA 2
Original price was: ₹101,540.00.₹98,000.00Current price is: ₹98,000.00.Add to cart- Polar pattern: Figure-of-eight
- Frequency response: 20Hz – 15kHz
- Sensitivity: 6mV/Pa -45dB ±1dB(0dB = 1V/Pa @ 1,000Hz)
- Impedance: ≤200 Ohms
- Equivalent noise level: 10dB(A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 140dB
- Power: Phantom power 48V required
- Connector: 3-pin XLR
- Dimensions: 164 x 72 x 35mm
- Weight: 470g (906g with shockmount)
- Comes with: shockmount, flightcase
-
Audio-Technica Microphone AT4040
Original price was: ₹94,400.00.₹55,000.00Current price is: ₹55,000.00.Add to cart- Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
- Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
- The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Custom shock mount provides superior isolation
-
Sontronics Drum Pack Plus
Original price was: ₹116,240.00.₹113,000.00Current price is: ₹113,000.00.Add to cart-
Polar pattern (all mics): Cardioid
-
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
-
Filter (STC-10 only): Linear/75Hz
-
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
-
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
-
8mV/Pa -42dB ±2dB (DM-1S & 1T),
-
11mV/Pa -39dB ±2dB (STC-10)
-
Impedance (all mics): ≤200 Ohms
-
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
-
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
-
Power sources (all mics): 48V ±4V phantom power required
-
Connector (all mics): 3-pin XLR
-
Dimensions: 144 x 72 x 72mm (DM-1B),
-
91 x 22 x 22mm (DM-1S & 1T),
-
150 x 21 x 21mm (STC-10)
-
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
-
Reviews
There are no reviews yet.