Sontronics Drum Pack Plus

Polar pattern (all mics): Cardioid
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
Filter (STC-10 only): Linear/75Hz
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
8mV/Pa -42dB ±2dB (DM-1S & 1T),
11mV/Pa -39dB ±2dB (STC-10)
Impedance (all mics): ≤200 Ohms
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
Power sources (all mics): 48V ±4V phantom power required
Connector (all mics): 3-pin XLR
Dimensions: 144 x 72 x 72mm (DM-1B),
91 x 22 x 22mm (DM-1S & 1T),
150 x 21 x 21mm (STC-10)
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)

Spread the love

The new Sontronics DrumPack and DrumPack Plus pull together our award-winning DM-series drum microphones into two all-in-one, premium-quality miking options that no drummer or studio should be without.

The seven-piece condenser microphone sets will give absolutely stunning results across your whole drumkit, plus they save you more than 30% on buying the mics individually!

The seven-piece DrumPack Plus (pictured below right and above left) includes a DM-1B, a DM-1S and three DM-1T as above plus a pair of STC-10 pencil condensers for use as overheads or for solo percussion miking.